MegaView 2 - Surveillance Camera Arecont Vision - Free user manual and instructions
Find the device manual for free MegaView 2 Arecont Vision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Surveillance Camera |
| Brand | Arecont Vision |
| Model | MegaView 2 |
| Resolution | 1920 x 1080 (2 MP) |
| Sensor Type | 1/2.8" Progressive Scan CMOS |
| Minimum Illumination | 0.05 lux (Color) |
| Lens Type | Fixed, 2.8mm (80° FOV) |
| Night Vision | Up to 30m with IR LEDs |
| Day/Night Mode | Mechanical IR Cut Filter |
| Video Compression | H.265 / H.264 / MJPEG |
| Frame Rate | 30 fps at 2MP |
| Power Supply | 12V DC / PoE (IEEE 802.3af) |
| Power Consumption | Max 5W |
| Dimensions (W x H x D) | 70 x 70 x 150 mm |
| Weight | 0.5 kg (approx.) |
| Ingress Protection | IP66 (Weatherproof) |
| Operating Temperature | -30°C to +50°C |
| Mounting Type | Bracket mount (optional) |
| Memory Card Slot | MicroSD up to 128GB |
| Network Interface | 10/100 Base-T Ethernet (RJ-45) |
| ONVIF Compliance | ONVIF Profile S/G/T |
| Main Functions | Motion detection, tamper alarm, privacy masking, edge recording |
| Cleaning and Maintenance | Wipe with dry cloth; avoid chemicals |
| Safety | Use only provided power supply; keep away from water |
| Spare Parts and Reparability | Contact authorized service center; no user-replaceable parts |
Frequently Asked Questions - MegaView 2 Arecont Vision
How do I reset the camera to factory defaults?
Press and hold the reset button on the camera for 10 seconds using a paperclip. The camera will reboot with factory settings. Note: all custom configurations will be lost.
What is the default IP address?
The default IP address is 192.168.0.90. If it does not work, use the Arecont Vision Discovery Tool to find the camera on your network.
Can I use the camera outdoors?
Yes, the MegaView 2 has an IP66 rating, making it dust-tight and protected against powerful water jets. It can operate in temperatures from -30°C to +50°C.
How do I access the camera's web interface?
Open a web browser and enter the camera's IP address. Use the default username 'admin' and password 'admin' (change it for security). Ensure your computer is on the same network.
Does the camera support audio?
No, the MegaView 2 is a video-only camera. It does not have a built-in microphone or audio input/output.
How can I update the firmware?
Download the latest firmware from the Arecont Vision website. Access the camera's web interface, go to Maintenance > Firmware Upgrade, and upload the file. Do not power off during the update.
What kind of memory card is supported?
The camera supports microSD cards up to 128 GB (Class 10 or UHS-1 recommended) for local recording. Format the card to FAT32 or exFAT.
The image is blurry, what can I do?
First, clean the lens with a soft, dry cloth. Then, adjust the focus ring on the lens. If using an auto-focus model, ensure the camera is not in a reflective environment. Reset to default focus if needed.
Can I mount the camera on a ceiling?
Yes, the camera can be mounted on a ceiling using an optional bracket. Ensure the bracket is securely attached and the camera is oriented correctly. The camera supports multiple mounting orientations.
How do I enable motion detection?
In the web interface, go to Events > Motion Detection. Enable it and draw detection zones on the video stream. Adjust sensitivity and threshold to avoid false triggers. Apply settings.
User questions about MegaView 2 Arecont Vision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Surveillance Camera in PDF format for free! Find your manual MegaView 2 - Arecont Vision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MegaView 2 by Arecont Vision.