Eurospec

Easi-Exit DCS2026 - Uncategorized Eurospec - Free user manual and instructions

Find the device manual for free Easi-Exit DCS2026 Eurospec in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Eurospec Easi-Exit DCS2026 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeDigital Door Closer / Exit Device
ModelEasi-Exit DCS2026
BrandEurospec
Dimensions (Unit)600 x 80 x 40 mm
Weight1.2 kg
Power Supply4 x AA batteries (not included)
Battery LifeApproximately 1 year under standard use
MountingSurface mounted on door frame (standard door preparation)
Adjustable Closing SpeedYes, via built-in valve
Latch FunctionElectrically operated latch with push-button exit
Push to ExitIntegrated push button or remote signal compatible
Compatible Door TypesWood, metal, aluminium profile doors (thickness 35-50 mm)
Door Width Range600 - 1100 mm
Door Weight CapacityUp to 80 kg
Fire RatingSuitable for FD30 and FD60 fire doors when installed correctly
Operating Temperature-20°C to +60°C
Ingress ProtectionIP20 (indoor use only)
Warranty2 years
MaintenanceClean with damp cloth; no solvents; check battery annually
SafetyComplies with EN 1154, EN 1634, and relevant fire safety standards
Spare PartsAvailable: cover plate, battery holder, latch assembly (contact Eurospec)
ReparabilityUser-replaceable batteries; other repairs by trained personnel

Frequently Asked Questions - Easi-Exit DCS2026 Eurospec

How do I install the Easi-Exit DCS2026 door closer?
Follow the template provided in the manual: mark screw holes on the door and frame, attach the mounting brackets, then secure the closer body. Ensure the arm is correctly engaged. For detailed steps, refer to section 2.1 of the manual.
How do I adjust the closing speed?
Use the adjustment valve located on the front of the closer. Turn clockwise to slow the closing speed, counterclockwise to speed it up. Make small adjustments and test after each turn.
What type of batteries does it use and how do I replace them?
The device uses 4 AA alkaline batteries. To replace: remove the cover, locate the battery holder, insert new batteries following polarity markings, and replace the cover. Use only fresh batteries from the same brand.
Why is my door not closing properly after installation?
Check that the closer arm is correctly connected and the closing speed valve is not fully closed. Also verify that the door hinges are aligned and no obstructions exist. If issue persists, consult the troubleshooting section.
Can I use this device on a fire door?
Yes, the Easi-Exit DCS2026 is suitable for FD30 and FD60 fire doors provided it is installed in accordance with the manual and local regulations. Always maintain the required fire rating.
How do I test the push-to-exit feature?
Press the push button on the unit or a connected remote switch. The latch should retract, allowing the door to open. If not, check battery power and wiring. Refer to the wiring diagram in section 3.2.
What is the maximum door weight this closer can handle?
The maximum recommended door weight is 80 kg. For heavier doors, consider using a higher capacity model or consult Eurospec technical support.
How do I reset the device if it malfunctions?
Remove the batteries for 30 seconds, reinsert them firmly. If the unit still does not operate, inspect wiring connections. A factory reset may be required; contact support for assistance.
Is the Easi-Exit DCS2026 compatible with access control systems?
Yes, it has a dry contact input that can be connected to a 3rd party access controller. Use normally open (NO) or normally closed (NC) configuration as per your system. See compatibility table in appendix A.
Where can I purchase spare parts or get technical support?
Spare parts and support are available through Eurospec’s official website or authorized distributors. Have your model number and purchase date ready when contacting support.

User questions about Easi-Exit DCS2026 Eurospec

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual Easi-Exit DCS2026 - Eurospec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Easi-Exit DCS2026 by Eurospec.

USER MANUAL Easi-Exit DCS2026 Eurospec

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Eurospec

Model : Easi-Exit DCS2026

Category : Uncategorized