Keratin Touch - Hair straightener OBH NORDICA - Free user manual and instructions

Product Type	Hair Straightener
Brand	OBH Nordica
Model	Keratin Touch
Dimensions (L x W x H)	30 cm x 4 cm x 4 cm (approx.)
Weight	Approx. 300 g
Power Consumption	150 W
Voltage	120-240 V, 50/60 Hz
Plate Material	Ceramic with Keratin infusion
Plate Size	25 mm x 100 mm (approx.)
Temperature Range	140°C – 230°C
Heat-up Time	Approx. 30 seconds
Auto Shut-off	Yes, after 60 minutes
Cord Length	1.8 m (approx.)
Swivel Cord	Yes, 360°
Warranty	2 years (as per standard)
Application	Straightening, smoothing, and adding shine
Safety Features	Auto shut-off, heat-resistant storage pouch
Maintenance	Wipe plates with a damp cloth after cooling
Spare Parts Availability	Plates and cord replaceable by service center

Frequently Asked Questions - Keratin Touch OBH NORDICA

What temperature should I use for my hair type?

Fine or damaged hair: 140-160°C. Normal hair: 160-200°C. Thick or coarse hair: 200-230°C. Always start low and increase if needed.

How long does it take to heat up?

The Keratin Touch heats up in approximately 30 seconds to your selected temperature.

Can I use this straightener on wet hair?

No, always use on dry hair to avoid damage. Towel-dry and blow-dry first.

How do I clean the plates?

Unplug and let cool. Wipe plates with a damp cloth. Do not use abrasive cleaners or immerse in water.

Does it have auto shut-off?

Yes, the Keratin Touch automatically shuts off after 60 minutes of inactivity for safety.

What does the keratin infusion do?

The keratin-infused ceramic plates help seal in moisture, reduce frizz, and add shine while straightening.

Is the straightener suitable for travel?

Yes, it has dual voltage (120-240V) and a swivel cord for easy packing. Use a plug adapter if needed.

How often should I replace the plates?

Plates can last several years. If they become scratched or worn, contact OBH Nordica service for replacement.

What is the warranty period?

The Keratin Touch comes with a 2-year warranty covering manufacturing defects. Keep your proof of purchase.

Can I use styling products before straightening?

Yes, heat protectant sprays are recommended. Avoid products that can damage the plates, like heavy oils.

USER MANUAL Keratin Touch OBH NORDICA

DESIGNING GOOD LIFE

BJÖRN AXÉN TOOLS STRAIGHTENER KERATIN TOUCH

OBH Nordica Denmark A/S

Ole Lippmanns Vej 1

2630 Taastrup

Tlf.: 43 350 350

www.obhnordica.dk

Tekniske data

OBH Nordica 3009

100-240V\~, 50/60 Hz

43-47 W

OBH Nordica Norway AS

Maridalsveien15 E

0178 Oslo

Tlf: [phone]

www.obhnordica.no

Tekniske data

OBH Nordica 3009

100-240V\~, 50/60 Hz

43-47 W

1. Read the instruction manual carefully before use and save it for future use.
2. Plug the appliance to a household outlet of 100-240 V only, and use the appliance only for the intended use.
3. Always unplug the appliance from the mains supply when not in use, after use, if a problem occurs, when you add or remove parts from the appliance and before cleaning and maintenance.
4. This appliance can be used by children aged 8 years and over and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way by a person responsible for their safety and they understand the hazards involved.
5. Children should be supervised to ensure that they do not play with the appliance. Children are not always able to understand potential risks. Teach children a responsible handling of electrical appliances.
6. Cleaning and maintenance shall not be made by children, unless they are over the age of 8 and supervised.
7. Check that the cord is not hanging over the edge of the table.
8. The appliance should only be used under supervision.

9. CAUTION! Never use the appliance close to a bathtub, a shower, a washbasin or similar containing water.

10. The appliance must not be immersed in water or any other liquids. Never use the appliance with humid hands and do not position the appliance on a wet or humid surface.

11. Always unplug the appliance from the mains supply immediately after use, if the appliance is used in a bathroom, as water presents a hazard even when the appliance has been switched off.
12. Always examine appliance, cord and plug for damage before use. If the supply cord is damaged, it must be replaced by the manufacturer or his service agent or a similarly qualified person in order to avoid a hazard.
13. For additional protection we recommend the installation of a residual current device (RCD) with a rated residual operating current not exceeding 30 mA. Ask your installer for advice.
14. The appliance is for domestic use only.
15. If the appliance is used for other purposes than intended, or is it not handled in accordance with the instruction manual, the full responsibility for any consequences will rest with the user. Any damage of the product or other things is not covered by the warranty.

You are welcome to visit our website www.obhnordica.se for inspiration and further information about our products.

How to use the appliance

Make sure that the hair is completely dry and comb it well. If the hair is very long or thick, it would make it easier if you use the delivered hair clips to separate the hair.

Plug the appliance to a wall outlet and you will hear a beep sound. Activate the plate straightener by pressing the switch on top of the appliance and you will hear one more beep and the temperature button (thermometer icon) next to the lower plate flashes. From the factory, the temperature is set at 150° C, but is easily adjusted by pressing the temperature button in the display until the

desired temperature lights. Choose the temperature that best fits your type of hair, see recommended temperatures later in the text.

When you use the appliance for the first time, we recommend that you start at the lowest temperature.

150-170°C – thin and fine hair/coloured hair 190-210°C – normal hair 230°C – thick and very sensitive hair

Put the plate straightener on an even, heat-resistant surface during heating. The temperature button flashes until the set temperature is reached and afterwards the light will be on constantly. You will hear a beep sound as an indication that the plate straightener is ready for use.

Keep the straightener at a safe distance from your skin and eyes. Use a mirror. Do not take hair sections of more than 5 cm. Spread the hair section between the plates and press them together. Take care that your fingers do not touch the hot plates. Now pull the plate straightener downwards towards the tips in an even movement. To get the best result, start close to the bottom of the hair and work your way towards the tips.

NOTE! The plate straightener reaches very high temperatures. Make sure that the hot plates of the straightener do not touch the scalp, your face, neck or hands. Do not use the plate straightener for wigs, hair extensions or artificial hair without having tested the appliance on a small section of hair, as there may be a risk that the hair will melt.

Automatic switch-off

The plate straightener comprises a safety device that switches it off after about 1 hour. The display goes off and you hear a beep sound. The automatic switch-off function is an additional safety function, but as a main rule, you should always switch off the appliance by pressing the on/off button. Always unplug after use.

Cleaning and maintenance

• Turn off the straightener by pressing the switch. You will hear a beep sound and the display goes off. Put the appliance on a heat-resistant surface to cool completely before cleaning.
• Note that the use of chemicals could damage the colour of the surfaces of the appliance.
• Make sure that the straightener is out of the reach of children. The straightener reaches very high temperatures during use and it therefore takes some time for it to cool completely.
• Never immerse the straightener and the cord in water of any other liquid and be sure that it does not get in direct contact with water.

• Be careful that water does not penetrate into the housing of the straightener!

• Wipe dry the housing and the plates of the appliance with a damp cloth. Wipe with a dry cloth.

• Do not wind the cord around the plate straightener.
• Make sure that the plate straightener is completely cool and dry before storing.
• Store the plate straightener at a dry and safe place out of the reach of children after use.

The plate straightener has a useful locking function that makes it easy for you to bring it with you. Activate the locking function by pressing together the plates and push forward the locking button located at the cord support and push the button backwards. Keep the plate straightener in the delivered bag.

Do not wind the cord around the plate straightener, as this may cause an abnormal wear that might end up in a rupture of the cord.

Disposal of the appliance

Legislation requires that all electrical and electronic equipment shall be collected for reuse and recycling. Electrical and electronic equipment marked with the symbol indicating separate collection of such equipment should be returned to a municipal waste collection point.

Warranty

Warranty according to current law. Any claim shall be accompanied by the cash receipt with purchase date. When raising a claim the appliance should be returned to the store of purchase.

OBH Nordica AB

Löfströms Allé 5

172 66 Sundbyberg

Tel: [phone]

www.obhnordica.se

Technical data

OBH Nordica 3009

100-240V\~, 50/60 Hz

43-47 W

Automatic switch-off after about 1 hour

Extra long cord: 2.8 m

Keratin treated, flexible ceramic plates

Heat resistant bag

2 hair clips

These instructions are subject to alterations or improvements.