CW1298 - Blender Coline - Free user manual and instructions

Brand	Coline
Model	CW1298
Product Type	Blender
Power Consumption	800 W
Power Supply	220–240 V AC, 50 Hz
Jug Material	Glass
Jug Capacity	1.5 litres
Max Continuous Operation	2 minutes
Control Modes	Manual, Interval, Smoothie, Ice Crush
Safety Features	Safety switch; blade guard; non-slip base
Blade Type	Removable, sharp stainless steel
Cooling Down Period	Allow motor to cool a few minutes between cycles
Dishwasher Safe Parts	Jug and jug base only
Hand Wash Required	Lid, centre cap, blade unit, seal, motor unit
Max Liquid Temperature	60 °C for glass jug
Dimensions (approx.)	Height: 40 cm, Width: 18 cm, Depth: 18 cm
Weight (approx.)	3.5 kg
Included Accessories	Glass jug with lid and centre cap, blade unit, motor unit

Frequently Asked Questions - CW1298 Coline

How do I clean the blender easily?

Fill the jug with warm water and a drop of dish soap, place it on the motor unit, and run the Interval program for a few seconds. Rinse thoroughly.

Can I blend hot liquids?

No, the glass jug can only withstand temperatures up to 60 °C. Blending hot liquids can cause pressure buildup and cracking.

What should I do if the blender stops during operation?

The blender has a safety switch that stops the motor if the jug is not properly placed. Check that the jug is correctly seated on the motor unit.

Can I put the jug in the dishwasher?

Yes, only the glass jug and the jug base are dishwasher safe. All other parts, including the blade unit and lid, must be washed by hand.

How long can I run the blender continuously?

Do not run the blender for more than 2 minutes at a time. Allow the motor to cool down for a few minutes before using it again.

What is the capacity of the jug?

The glass jug has a capacity of 1.5 litres.

Can I crush ice with this blender?

Yes, use the Ice Crush program. The blender runs an automatic cycle of speeds and pauses for about 70 seconds.

How do I remove the blade for cleaning?

Turn the jug upside down, rotate the jug base anticlockwise to remove it, then lift out the blade unit. Exercise caution as the blades are very sharp.

What type of plug does it have?

The blender comes with a standard 220-240 V plug suitable for European sockets. Check local compatibility.

Is the blender safe for children to use?

No, the blender must not be used by children. Keep it out of reach. Cleaning may be done by children only under adult supervision.

USER MANUAL CW1298 Coline

Close-up of a white blender with black handle and blue control knob (no visible text or symbols)

Blender

Art.no 18-4625-1, -2, -3, -4 Model YD1627

44-1298-1, -2, -3, -4 YD1627

Please read the entire instruction manual before using the product and then save it for future reference. We reserve the right for any errors in text or images and any necessary changes made to technical data. In the event of technical problems or other queries, please contact our Customer Services (see address details on the back).

Safety

• Incorrect handling of this blender could result in personal injury.
• Great care should be exercised when handling and cleaning the blade and the jug. The blade is very sharp.
• The blender should always be disconnected from the mains when it is not in use, when it is to be assembled/disassembled and when it is to be cleaned.
• The blender must not be used by children. Ensure that the blender and its mains lead are kept out of children's reach.
• The blender must only be used with the included motor unit.
• Note: Ensure that the blender is switched off before the jug is removed from the motor unit.
• Switch the blender off and disconnect it from the mains before removing the blade or any of the moving parts.
• The blender may be used by persons with reduced physical, sensory or mental capability, lack of experience or knowledge which could jeopardise their safety, provided they have been instructed in the safe use of the product and understand the hazards involved. Cleaning and maintenance may be carried out by children but only under adult supervision.
• Never let children play with the blender.
• Cleaning and maintenance may be carried out by children but only under adult supervision.
• The blender should only be connected to a 220–240 V AC power supply.

• Always remove the jug from the motor unit before cleaning.
The blade is extremely sharp and could cause serious personal injury if the blender were to start accidentally.
- To prevent electric shocks, the blender and its mains lead should always be kept dry.
- Never position the mains lead close to hot surfaces or in such a way that it could be damaged by sharp edges or corners.
- Always disconnect the blender from the power supply by holding and pulling the plug. Do not pull the mains lead.
- Make sure that all parts are correctly assembled and that the blender is switched off before it is connected to the power supply.
- Never operate the blender without food in the jug.
- Never use the blender close to heat sources.
- Only use the supplied parts and/or accessories.
- The blender should only be used as described in this manual.
- Never use the blender if it is in any way damaged or malfunctioning.
- The mains lead should be checked regularly. Never use the blender if the mains lead or plug is damaged.
- The mains lead must be changed if damaged. This is to prevent the risk of electric shock or fire and should only be carried out by the manufacturer, authorised service facility or a qualified tradesman.

Product description

1. Centre cap
2. Lid
3. Glass jug
4. Gasket
5. Blade unit
6. Jug base
7. Control panel
8. Motor unit
9. Handle

Operating instructions

Tips and advice

• Never run the blender for more than 2 minutes at a time. Let the motor cool down for a few minutes before using the blender again.
• Never run the blender empty.
• If frozen ingredients are to be mixed, they should be mixed as soon as they are placed in the jug, otherwise they might freeze together and jam the blades.
• Do not fill the jug with hot liquid as the pressure build-up in the blender can be too high.
• Never shake the jug whilst the motor is running. If ingredients get stuck on the sides of the jug, shut off the blender and use a spatula etc. Do not start the blender again until you have replaced the lid properly.
• The glass jug can withstand contents with temperatures up to 60 °C. Do not mix hot ingredients with ice-cold ingredients, the differences in temperature could cause the glass to crack.

Important considerations

• Always keep one hand on the lid when running the blender.
- Use extra caution when blending hot liquids.
- Use the interval mode (or use the manual mode and choose your own intervals) when mixing solid ingredients or very thick liquids to prevent the blades from becoming stuck.

Mixing solid foodstuffs into purée

1. Cut the ingredients into small pieces (2–3 cm), remove the centre cap and add a few pieces at a time. This is better than adding everything all at once.
2. Always add a little liquid to solid foodstuffs before starting to mix them. More liquid can then gradually be poured into the jug through the hole in the lid once the centre cap has been removed.
3. Thoroughly clean all parts before using the blender for the first time. Refer to the Care and maintenance section.
4. Add the ingredients to the jug.
5. Put the lid (2) and the centre cap (1) on the jug.
6. Place the jug onto the motor unit.
7. Plug the mains lead into an electrical socket and switch the completely assembled blender on by turning the function selector to an appropriate setting for the contents of the jug.

Programme Ice crush mode

1. Press [ice crush], the respective LED will light. The blender will run on an automatic programme with different speeds and pauses.

2. The programme will automatically stop after approximately 70 seconds. The programme can be interrupted at any time by pressing the [▶/■] button. The motor will stop and all three LEDs will flash.

Smoothie mode

1. Press [ smoothie ], the respective LED will light. The blender will start an automatic programme with different speeds.

2. The programme will automatically stop after 60 seconds. The programme can be interrupted at any time by pressing the [▶/■] button. The motor will stop and all three LEDs will flash.

Interval mode

Press [interval], the blender will start an automatic programme with different speeds. The programme will automatically stop after approximately 45 seconds. The programme can be interrupted at any time by pressing the [▶/■] button. The motor will stop and all three LEDs will flash.

Manual mode

1. Set the function selector to the desired speed setting.
2. Press [▶/■] to start.
3. Press [▶/■] or turn the function selector to 0 to switch the blender off.

Note: The blender will only start if the glass jug is fitted correctly. The blender is fitted with a safety switch to prevent the motor from operating unless the jug is in place.

Turn the function selector to 0 and unplug the blender after use.

Care and maintenance

Note:

• Switch the blender off by turning the function switch to 0 and unplug it before cleaning it. Exercise extreme caution. Take care when handling the blade unit – the blades are extremely sharp.
• Never immerse the motor unit into water. Wipe the outside of the motor unit with a clean, damp cloth.

Cleaning the jug with the blades fitted

Empty the jug, fill it with water, add a little washing-up liquid, put the jug back onto the motor unit and turn the function selector to the interval mode. Operate the blender until you are satisfied that any food residue has been washed off the sides of the jug and then empty the dishwater out of the jug. Rinse the jug with clean water and let it dry.

Cleaning with the blades removed

1. Turn the jug upside down and remove the jug base by turning it anticlockwise.
2. Lift out the blade unit, remove the seal and wash all the parts.
3. Let the parts air dry before re-assembling them in the jug. Refer to the picture in the Product description section to ensure that the seal is fitted correctly.
4. If necessary the jug and the jug base (6) can be washed in the dishwasher. Note: Only the jug and the jug base are dishwasher proof, all the other parts must be washed by hand.

Switch the blender off, unplug the mains lead from the wall socket and store the cleaned blender in a dry, dust-free place out children's reach whenever it is not to be used for any extended period.

Disposal

This product should be disposed of in accordance with local regulations.

If you are unsure how to proceed, contact your local council.

Specifications

Mains supply 220–240 V AC, 50 Hz, Class II

Wattage 800 W

Glass jug 1.5 litres

Max operating time 2 minutes continuously, then the motor should be allowed to cool

Blender

Art.nr 18-4625-1, -2, -3, -4 Modell YD1627

44-1298-1, -2, -3, -4 YD1627

Användning

Tips och råd

Bruk

Tips og råd

Käyttö

Käyttövinkkejä

Bedienung

Nützliche Hinweise

Programme Ice crush (Eiscrusher)

10 - 13 Market Place

Kingston Upon Thames

Surrey

KT1 1JZ

DEUTSCHLAND

KUNDENSERVICE

Hotline: [phone]

E-Mail: [e-mail]

Homepage

www.clasohlson.de

Postanschrift