KSC-200 - Convertisseur KTI Networks - Free user manual and instructions
Find the device manual for free KSC-200 KTI Networks in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Media Converter |
| Model | KSC-200 |
| Brand | KTI Networks |
| Dimensions | 120 x 80 x 25 mm |
| Weight | 200 g |
| Power Supply | 5V DC, 1A (external adapter) |
| Data Rate | 10/100 Mbps |
| Connectors | 1x RJ-45, 1x SC fiber |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
| LED Indicators | Power, Link/Act, FDX/Col |
| Compliance | FCC, CE |
| Installation | Plug and play, no configuration needed |
| Maintenance | Clean with a dry, soft cloth; avoid liquids |
| Safety | Use only supplied power adapter; keep away from moisture |
| Spare Parts | Power adapter available as accessory |
| Repairability | No user-serviceable parts; contact support for issues |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - KSC-200 KTI Networks
How do I install the KSC-200 media converter?
Simply connect the RJ-45 cable to your network device and the fiber cable to the converter, then plug in the power adapter. The device is plug-and-play, no configuration required.
What types of cables are compatible?
The KSC-200 supports Cat5e or higher UTP copper cables for the RJ-45 port and single-mode or multi-mode fiber with SC connectors for the fiber port.
What is the maximum transmission distance?
For copper, the maximum distance is 100 meters. For fiber, it depends on the fiber type: up to 2 km with multi-mode and up to 20 km with single-mode fiber.
What does the Link LED indicate?
The Link LED lights up when a valid network connection is established. If it is off, check your cable connections and ensure the device at the other end is powered on.
What power supply does the KSC-200 use?
It uses an external 5V DC power adapter with a minimum current rating of 1A. Use only the supplied adapter to avoid damage.
Is the KSC-200 compatible with other brands?
Yes, it complies with IEEE 802.3 standards, so it works with any standard 10/100Base-TX and 100Base-FX equipment from any brand.
How do I reset the converter to factory defaults?
The KSC-200 has no reset button. To reset, simply unplug the power adapter, wait 10 seconds, and plug it back in. This clears any temporary settings.
Does the converter require any configuration?
No, it is a plug-and-play device. It automatically negotiates speed and duplex mode on the copper port and operates in full-duplex on the fiber port.
What should I do if the network connection is not working?
Check all cable connections, ensure the power LED is on, and verify that the Link LED is lit. If still not working, try a different cable or power cycle the device.
Is the KSC-200 covered by a warranty?
Yes, KTI Networks provides a 1-year limited warranty against defects in materials and workmanship. Contact your dealer for warranty service.
User questions about KSC-200 KTI Networks
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Convertisseur in PDF format for free! Find your manual KSC-200 - KTI Networks and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KSC-200 by KTI Networks.