5S-5S002-3 - Barcode Reader HONEYWELL - Free user manual and instructions
Find the device manual for free 5S-5S002-3 HONEYWELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Barcode Reader |
| Model | 5S-5S002-3 |
| Brand | Honeywell |
| Scan Technology | Area Imager (2D) |
| Supported Barcodes | 1D, 2D, Postal, Stacked, OCR |
| Interface | USB, RS-232, Keyboard Wedge |
| Dimensions (L x W x H) | 17.0 x 7.0 x 10.5 cm (typical) |
| Weight | Approx. 200 g (without cable) |
| Power Supply | 5VDC via USB or external power |
| Current Consumption | 400 mA (operating) |
| Scan Range | Up to 30 cm for typical 1D barcodes |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 95% non-condensing |
| Drop Resistance | 1.5 m to concrete |
| Sealing | IP42 |
| Maintenance | Clean window with soft, damp cloth; avoid solvents |
| Repairability | User-replaceable cable; service center for other repairs |
| Included Accessories | USB cable, quick start guide |
| Warranty | 3 years (typical Honeywell) |
Frequently Asked Questions - 5S-5S002-3 HONEYWELL
How do I connect the Honeywell 5S-5S002-3 to my computer?
Connect the scanner using the provided USB cable. The device will be recognized as a HID keyboard. Refer to the manual for driver installation if needed.
Can the scanner read 2D barcodes like QR codes?
Yes, the 5S-5S002-3 is an area imager that reads both 1D and 2D barcodes, including QR codes, Data Matrix, and PDF417.
How do I clean the scanner window?
Use a soft, lint-free cloth dampened with water or a mild cleaning solution. Avoid abrasive materials or solvents that may damage the window.
The scanner is not beeping when scanning. What should I do?
Check the connection to the host. Ensure the scanner is configured for the expected interface (e.g., USB Keyboard). Try scanning a configuration barcode from the manual to reset settings.
What is the default baud rate for RS-232 communication?
The default baud rate is 9600 bps, 8 data bits, no parity, 1 stop bit. Configure via barcode commands.
How do I perform a factory reset?
Scan the 'Factory Defaults' barcode from the user manual. This restores the scanner to original settings.
Can I use the scanner with a smartphone or tablet?
Yes, if the device supports USB On-The-Go (OTG). Use an OTG adapter to connect the scanner.
What is the recommended operating distance for scanning?
Typical scanning distance is 10-30 cm (4-12 inches) for standard 1D barcodes. Adjust based on barcode size and density.
How do I replace the cable?
The cable is user-replaceable. Unplug the old cable from the scanner and plug in the new one. Ensure compatibility with the model.
Is the scanner compatible with my POS system?
The scanner works with any system that accepts keyboard wedge input (USB or RS-232). Configure the interface mode using barcode programming.
User questions about 5S-5S002-3 HONEYWELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual 5S-5S002-3 - HONEYWELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5S-5S002-3 by HONEYWELL.