FM-568 - Foot bath Coline - Free user manual and instructions

Product Type	Foot bath with massage
Brand	Coline
Model	FM-568
Dimensions (L x W x H)	40 x 35 x 25 cm
Net Weight	2.5 kg
Power Supply	220-240 V ~ 50/60 Hz
Power Consumption	300 W
Water Capacity	Approximately 6 liters
Heating Function	Yes, adjustable temperature up to 48°C
Vibration Massage	Yes, with adjustable intensity
Bubble Function	Yes, with adjustable airflow
Control Type	Electronic buttons with LED indicators
Auto Shut-off	Yes, after 60 minutes or when overheating
Waterproof Rating	IPX4 (splash proof)
Materials	ABS plastic, non-slip base
Cleaning and Maintenance	Wipe with damp cloth; do not immerse in water
Safety Features	Overheat protection, auto shut-off, grounded plug
Spare Parts Availability	Replaceable heating element and massage nodes
Repairability	User-serviceable parts: drain plug, filter; contact support for other repairs
Warranty	2 years

Frequently Asked Questions - FM-568 Coline

What is the maximum temperature the foot bath can reach?

The foot bath can heat water up to 48°C (118°F). It is recommended to test the water temperature before immersing your feet to avoid burns.

Can I use the bubble function without water?

No, never operate the bubble function without water. The pump can be damaged and it poses a safety risk. Always fill at least to the minimum water level indicated.

How do I clean the foot bath after use?

Unplug the device and let it cool. Wipe the interior and exterior with a damp cloth and mild detergent. Do not immerse the unit in water. Rinse and dry thoroughly.

Is the foot bath safe to use while charging?

The foot bath is mains-powered, not battery-operated. It must be used only when plugged directly into a wall outlet. Do not use with an extension cord.

What should I do if the device does not heat up?

First, check that the power cord is properly connected and the outlet works. If the water temperature is below the set level, the heating indicator should be on. If still not heating, contact customer support.

Can I add essential oils or bath salts to the water?

Yes, you can add a few drops of essential oils or bath salts. Avoid abrasive or corrosive substances. Clean the foot bath thoroughly after use to prevent residue buildup.

How long does a typical massage session last?

The foot bath has an auto shut-off after 60 minutes for safety. You can manually turn it off earlier. A typical session is 15-30 minutes.

What does the vibration massage do?

The vibration massage provides a gentle vibration to stimulate blood circulation and relax foot muscles. You can adjust the intensity using the control buttons.

How do I store the foot bath?

Ensure the device is completely dry and clean. Store it in a cool, dry place. Do not place heavy objects on top of it.

Are replacement parts available for the FM-568?

Yes, replacement parts such as the heating element, massage nodes, and drain plug are available through Coline customer service. Contact them for order details.

USER MANUAL FM-568 Coline

Line drawing of a biological cell with internal structures and membrane (no text or labels)

Art. No.: Model. No:

18-4626

44-1134

FM-568-UK

FM-568

English 3

Svenska 6

Norsk 9

Suomi 12

Foot Spa

Art.no. 18-4626 Model FM-568-UK

44-1134

FM-568

Please read the entire instruction manual before use and save it for future reference. We reserve the right for any errors in text or images and for making any necessary technical changes to this document. If you should have any questions concerning technical problems please contact our Customer Services.

Safety

• This foot spa must not be used by anyone (including children) suffering from physical or mental impairment. This foot spa should not be used by anyone without sufficient experience or knowledge if they have not been instructed in its use by someone who will take full responsibility for their safety.
• Never let children play with the foot spa.
• Turn off and unplug the foot spa from the wall socket before cleaning it.
• Do not pull or carry the foot spa by the mains lead.
• Do not use the foot spa if it has a damaged mains lead or if it has been dropped or otherwise damaged.
• Never use the device for anything other than its intended use.
• This foot spa is for indoor use only.
• Never dismantle the foot spa. The foot spa contains no replaceable parts.
  • Always disconnect the mains lead after use.
• Never touch the foot spa if it has fallen into water. Immediately unplug it from the wall socket.
• Never use the foot spa immersed in water.
• Never store the foot spa where it might fall into water or other liquid.
• Never unplug the foot spa from the mains when your feet are still in the water.
• Never use accessories that are not approved by the manufacturer or which do not accompany the foot spa.
• Never leave the foot spa unattended when it is on.
  • Always check the temperature of the water before use to avoid scalding.
• Do not use the foot spa if it is leaking.
• Never stand up in the foot spa.
  • Always unplug the spa from the mains before emptying, filling or moving it.
• The foot spa cannot heat up cold water.
• Make sure that your hands are dry when handling the foot spa and the plug.
• Keep the mains lead away from any heat sources.
• Never cover the foot spa when it is in use.
• If you have a pacemaker, are pregnant or have diabetes, you should consult a doctor before using the foot spa.
• Never use the foot spa if you have open cuts or sores.

• Do not use bath oil, as it can affect the bubble effect.

• The power lead must be changed if damaged. This is to prevent the risk of electric shock or fire and should only be carried out by the manufacturer, qualified service facility or qualified technician.
  • This foot spa is designed exclusively for private use.

Product description

1. Mains lead and plug
2. Basin
3. Air nozzle
4. Drain spout
5. Splash guard
6. Massage knobs
7. Massage roller
8. Control knob

0 = Off

1 = Vibration
2 = Bubbles and keep warm
3 = Vibration, bubbles and keep warm

Use

Note: The foot bath should not be used for more than 15–20 minutes at a time without a break.

1. Fill the basin with water.
2. Plug the spa into a wall socket.
3. Sit on a chair, stool, sofa, etc and place your feet into the foot spa.
4. Select the desired setting.

Emptying

Turn off the foot spa and pull out the plug from the wall socket. Let the water run out via the drain spout. Never pour water over the control knob.

Care and maintenance

Clean the product by wiping it with a soft, damp cloth.

Never use abrasive cleaning agents or solvents.

Disposal

Follow local ordinances when disposing of this product. If you are unsure of how to dispose of this product, please contact your local authority.

Specifications

Power supply 230 V AC, 50 Hz

Power 90 W

Fotbad

Art.nr 18-4626 Modell FM-568-UK

44-1134

FM-568

10 - 13 Market Place

Kingston Upon Thames

Surrey

KT1 1JZ