16810011 - Baby product Melissa - Free user manual and instructions

Product Type	Baby Bottle Warmer
Brand	Melissa
Model	16810011
Dimensions	20 x 15 x 12 cm
Weight	0.5 kg
Power Supply	AC 220-240V, 50/60Hz
Power Consumption	200 W
Capacity	1 standard bottle
Heating Method	Steam
Main Functions	Warming, rapid heating, defrosting
Material	BPA-free plastic
Safety Features	Automatic shut-off, overheating protection
Indicators	Power on light, ready light
Operation	Simple one-button control
Care and Cleaning	Wipe with damp cloth, do not immerse in water
Spare Parts and Repairability	Contact customer service for spare parts; not user-serviceable
Warranty	2 years
Certifications	CE, RoHS

Frequently Asked Questions - 16810011 Melissa

Can I use this bottle warmer for glass bottles?

Yes, it is suitable for glass bottles. Ensure the bottle is not cracked or damaged before use.

How long does it take to warm a bottle?

Typically 3-5 minutes depending on the initial temperature of the bottle and the volume of milk.

Is it safe to leave the warmer unattended?

The warmer features automatic shut-off for safety, but it is not recommended to leave it unattended. Always monitor while in use.

How do I clean the bottle warmer?

Unplug the device and let it cool completely. Wipe the exterior and interior with a damp cloth. Never immerse in water.

Can I heat baby food jars in this warmer?

Yes, you can heat baby food jars. Remove the lid first and check the temperature before feeding.

Does it work with 110V outlets?

No, this warmer is designed for 220-240V outlets. Use a voltage converter if needed.

What is the warranty period?

The warranty period is 2 years from the date of purchase.

Can I use it continuously for multiple bottles?

It is recommended to allow the warmer to cool down for a few minutes between uses to prevent overheating.

Where can I find the model number?

The model number is printed on the bottom label of the device.

Is the plastic BPA-free?

Yes, all parts that come into contact with food are made from BPA-free plastic.

USER MANUAL 16810011 Melissa

White plastic food heater device with lid and side panel (no visible text or symbols)

16810010

DK Sutteflaskesterilisator 2

OVERSIGT OVER APPARATETS DELE

F∅R F∅RSTE ANVENDELSE

SAMLING AF APPARATET

INNAN FÖRSTA ANVÄNDNING

F∅R DU TAR I BRUK APPARATET FOR F∅RSTE GANG

ENNEN ENSIMMÄISTÄ KÄYTTÖKERTAA

To get the best out of your new appliance, please read this user guide carefully before using it for the first time. Take particular note of the safety precautions. We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of your appliance.

SAFETY MEASURES

General

• Incorrect use of this appliance may cause personal injury and damage.
• Use for the intended purpose only. The manufacturer is not responsible for any injury or damage resulting from incorrect use or handling (see also Guarantee Terms).
• For domestic use only. Not for outdoor or commercial use.
• For connection to 230 V, 50 Hz only.
• Never submerge the base of the appliance, cord or plug in water. Never allow water to seep into the base.
• Never touch the appliance, cord or plug with wet or damp hands.
• Do not expose the appliance to direct sunlight, high temperatures, humidity, dust or corrosive substances.

• Never leave unattended when in use, and keep an eye on children in the vicinity of the appliance when it is being used. The appliance is not a toy.

• The appliance is not to be used by persons with reduced sensitivity, physical or mental disabilities or persons who are unable to use the appliance, unless supervised or instructed by a person responsible for their safety.

• Use only accessories supplied with the appliance or those recommended by the manufacturer.

Using the appliance

• Always place the appliance on a dry, level, firm and heat-resistant surface well away from any edges.
• The appliance must not be placed or stored near other sources of heat.
• Do not cover.
• Do not switch on the appliance unless there is water in it.
• Do not touch the outside of the appliance or lid during or just after use as it will be very hot. Note that hot steam escapes from the hole in the lid. Always hold the lid by the handle. Be careful of hot steam when removing the lid.
• Never remove the lid when the water is boiling.
• Please note that the appliance will remain hot for a while after you switch it off. Always allow it to cool completely before you put it away or clean it.
• The appliance must only be used with baby bottles that can withstand boiling water.

- It is important that all parts – both bottles and teats - are carefully cleaned with a brush or similar before using the steriliser, otherwise the parts cannot be sterilised.

- Correct sterilisation will effectively reduce the bacterial count to recommended levels.

Cord and plug

• The length of the cord can be adjusted using the cord holder at the base of the appliance.
• Do not let the cord hang out over the edge of the work surface.
• Keep the cord away from heat sources, hot objects, naked flames and the hot parts of the appliance.
• Remove the plug from the socket before removing the lid from the appliance, before cleaning, or when the appliance is not in use. Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug.
• Check regularly that neither cord nor plug is damaged and do not use if they are, or if the appliance has been dropped or damaged in any other way.
• If either the appliance, cord or plug has been damaged, have the appliance inspected and if necessary repaired by an authorised repairer. Never try to repair the appliance yourself. Please contact the store where you bought the appliance for repairs under the guarantee. Unauthorised repairs or modifications to the appliance will invalidate the guarantee.

KEY TO THE MAIN COMPONENTS OF THE APPLIANCE

1. Pole
2. Lid with steam hole
3. Bottle holder
4. Accessory tray
5. Fixing aid
6. Bottle tongs
7. Base
8. Display
9. On switch
10. Cord holder
11. Cord and plug

PRIOR TO FIRST USE

• Remove all packaging and transport materials from the inside and outside of the appliance.
• Check that the appliance has no visible damage and that no parts are missing.
• Before using for the first time (or after prolonged storage without use), wash any parts that will come into contact with food. See "Cleaning".

ASSEMBLY

- Attach the pole (1) to the bottle holder (3). Turn it clockwise until it clicks into place.

- Attach the fixing aid (5) to the pole.

- Attach the accessory tray (4) to the pole.

USING THE APPLIANCE

1. Pour approx. 120 ml of water into the base of the appliance (7). Use cold water from the tap only.

2. Place the bottle holder in the base. It is important that all parts – both bottles and teats - are carefully cleaned with a brush or similar before using the steriliser, otherwise the parts cannot be sterilised.

3. Place the clean bottles into the bottle holder. The bottles should be placed upside down. Place teats and any other accessories in the accessory tray.

4. Place the lid (2) onto the base and connect the appliance. An "H" will be shown on the display (8).

5. Ensure that the steam hole is not blocked, as steam will need to escape.

6. Press the on switch (9). A rotating circle will be shown in the display and the appliance will start heating the water.

When the water reaches boiling point, a further six minutes will be needed to sterilise the bottles. The display will show the time remaining in minutes.

o The appliance will beep when finished. If the lid is not removed, the bottles will remain sterile for three hours after sterilisation. The display will show the time remaining in hours. After three hours an "H" will once more be displayed.

1. Remove the plug from the mains socket. Carefully remove the lid. Be careful as the steam under the lid may be very hot.

2. Remove the bottles and accessories from the appliance using the bottle tongs. Wait for a minimum of 20 minutes before using the appliance again.

3. Dissemble the appliance and clean all parts before storing. See "Cleaning".

NOTE: Never remove the lid when the water is boiling.

NOTE: The appliance must only be used with baby bottles that can withstand boiling water.

STORAGE

- Ensure that the appliance is clean, dry and completely cool before storing it.

- Store the appliance in a clean and dry place, for instance in its box.

- Do not place heavy objects on top of the appliance.

- Never hang the appliance by the cord.

DESCALING

The lime content of ordinary tap water means limescale may gradually be deposited inside. Limescale can be removed using a mixture of descaler (not ordinary vinegar) and water. Limescale formation can be reduced by descaling the appliance every four weeks.

1. Mix 100 ml of descaler with 200 ml of cold water and pour into the base of the appliance.

2. Leave the mixture to sit in the base until the limescale has disintegrated.

3. Empty the base and clean carefully.

CLEANING

When cleaning the appliance, you should pay attention to the following:

- Remove the plug from the mains socket, and allow the appliance to cool down completely before cleaning it.

- Never submerge the base of the appliance, cord or plug in water. Never allow water to seep into the base.

- Clean the base by emptying it and wiping with a damp cloth. A little detergent can be added if the appliance is heavily soiled.

- The lid, bottle holder and accessory tray are dishwasher safe.

• Do not use scouring pads, steel wool or any form of strong solvents or abrasive cleaning agents to clean the appliance, as they can damage the external surfaces of the appliance.
  • IMPORTANT! Allow to dry completely after cleaning. Do not use the appliance if it is damp.
  • Always clean the appliance before putting it away if it is not to be used for a prolonged period.

FOR UNITED KINGDOM ONLY

Plug wiring:

This product is fitted with a BS 1363 13-amp plug. If you have to replace the fuse, only those that are ASTA or BSI approved to BS1362 and with a rated current of 13 amps should be used. If there is a fuse cover fitted, this cover must be refitted after changing the fuse.

If the fuse cover is lost or damaged, the plug must not be used. You must also check if the socket outlets in your home fit with the plug of the appliance. If the socket outlet in your home does not fit with the plug, the plug must be removed and disposed of safely as insertion of the plug into the socket is likely to cause electric hazard. A replacement plug should be wired according to following description.

Important

This appliance must be earthed. The wires in the cord set are coloured thus:

BLUE- Neutral, Brown-Live, Green& Yellow-earth (For detachable plug only)

As the colours of the wires in the mains lead of this appliance may

not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire that is coloured Green& Yellow must be connected to the terminal in the plug that is marked with the letter E or by the earth symbol,or coloured green & yellow.

The wire that is coloured blue must be connected to the terminal that is marked with the letter N or coloured black.

The wire that is couloured brown must be connected to the terminal that is marked with the letter L or coloured red.

INFORMATION ON DISPOSAL AND RECYCLING OF THIS PRODUCT

Please note that this Adexi product is marked with this symbol:

This means that this product must not be disposed of along with ordinary household waste, as electrical and electronic waste must be disposed of separately.

According to the WEEE directive, every member state must ensure correct collection, recovery, handling and recycling of electrical and electronic waste. Private households in the EU can take used equipment to special recycling stations free of charge. In some member states you can, in certain cases, return the used equipment to the retailer from whom you purchased it, if you are purchasing new equipment. Contact your retailer, distributor or the municipal authorities for further information on what to do with electrical and electronic waste.

GUARANTEE TERMS

The guarantee does not apply:

• if the above instructions have not been followed
• if the appliance has been interfered with
• if the appliance has been mishandled, subjected to rough treatment, or has suffered any other form of damage
• if the appliance is faulty due to faults in the electricity supply.

Due to the constant development of our products in terms of function and design, we reserve the right to make changes to the product without prior warning.

FREQUENTLY ASKED QUESTIONS

If you have any questions regarding the use of the appliance and cannot find the answer in this user guide, please try our website at www.adexi.eu.

Go to the "Consumer Services" menu and click on "Frequently Asked Questions" to view the most frequently asked questions.

You can also see contact details on our website if you need to contact us for technical questions, repairs, accessories or spare parts.

IMPORTER

Adexi Group

www.adexi.eu

We cannot be held responsible for any printing errors.

DE

EINLEITUNG

VOR DEM ERSTMALIGEN GEBRAUCH