SFO 3501 - Dishwasher Scandomestic - Free user manual and instructions
Find the device manual for free SFO 3501 Scandomestic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Scandomestic |
| Model | SFO 3501 |
| Dimensions (H x W x D) | 845 x 598 x 600 mm |
| Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Power Consumption (kWh/cycle) | 0.92 kWh |
| Water Consumption (L/cycle) | 9 L |
| Capacity (Place Settings) | 14 |
| Noise Level (dB(A)) | 44 |
| Energy Class | A+++ |
| Number of Programs | 6 |
| Programs | Eco, Auto, Intensive, Normal, Quick, Soak |
| Drying Performance | A |
| Child Lock | Yes |
| Water Protection System | AquaStop |
| Installation Type | Freestanding |
| Control Type | Electronic Push Button |
| Display | LED |
| Remaining Time Indicator | Yes |
| Delay Start | Yes (up to 24h) |
Frequently Asked Questions - SFO 3501 Scandomestic
How do I install the Scandomestic SFO 3501 dishwasher?
Ensure the dishwasher is placed on a level floor. Connect the water inlet hose to a cold water supply with a 3/4 inch thread. Connect the drain hose to a siphon or standpipe. Plug the power cord into a grounded outlet. For detailed instructions, refer to the installation manual.
How do I start a wash cycle?
Load the dishwasher, add detergent, and close the door. Select the desired program using the program button. Press the Start button. The cycle will begin after a few seconds. You can delay the start using the Delay Start function.
What detergent should I use?
Use only dishwasher detergents (powder, gel, or tablets). Do not use dish soap. Add detergent to the designated dispenser. For optimal results, use a combination of detergent and rinse aid.
Why is my dishwasher not draining?
Check the drain hose for kinks or blockages. Clean the filter assembly inside the dishwasher. Ensure the siphon or standpipe is not clogged. If the problem persists, check the drain pump for obstructions.
How do I clean the filter?
Turn off the dishwasher and remove the lower spray arm. Unscrew the coarse filter and fine filter. Rinse them under running water and scrub if necessary. Reassemble in reverse order. Clean filters monthly to maintain performance.
What do error codes like E1 or E4 mean?
E1 usually indicates water supply issues (check inlet hose and tap). E4 indicates overflow or leakage (check for leaks and ensure dishwasher is level). Refer to the manual for a full list of error codes.
Can I use dishwasher salt?
Yes, if your water is hard. Add special dishwasher salt to the salt compartment. Adjust the water hardness setting according to your local water hardness. This prevents limescale buildup.
How do I activate the child lock?
Press and hold the Child Lock button for 3 seconds until the indicator lights up. To deactivate, press and hold again. This prevents accidental operation by children.
Why are dishes not drying properly?
Ensure rinse aid is added and the rinse aid setting is adjusted. Use the Extra Dry option if available. Open the door slightly after the cycle to release steam. Avoid overloading.
How do I perform a factory reset?
Turn off the dishwasher. Press and hold the Program and Start buttons simultaneously for 5 seconds. The display will show 'R' or a reset code. Release buttons. The dishwasher will reset to default settings.
User questions about SFO 3501 Scandomestic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SFO 3501 - Scandomestic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SFO 3501 by Scandomestic.