EcoDry Pro 50 - Dehumidifier Argoclima - Free user manual and instructions
Find the device manual for free EcoDry Pro 50 Argoclima in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Dehumidifier |
| Model | EcoDry Pro 50 |
| Brand | Argoclima |
| Dimensions (W x D x H) | 35 x 25 x 50 cm |
| Weight | 10 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption | 300 W |
| Moisture Removal (30°C, 80% RH) | 20 L/day |
| Water Tank Capacity | 4 L |
| Noise Level | 45 dB(A) |
| Air Filter | Washable mesh filter |
| Refrigerant | R290 |
| Energy Efficiency Class | A |
| Functions | Auto defrost, continuous drainage, timer, 2 fan speeds |
| Safety Features | Auto shut-off when tank full, overload protection |
| Maintenance | Clean filter every 2 weeks; empty tank regularly |
| Spare Parts | Filter, water tank, continuous drain hose |
| Recommended Room Size | Up to 50 m² |
| Operating Temperature Range | 5°C to 35°C |
Frequently Asked Questions - EcoDry Pro 50 Argoclima
How do I set the desired humidity level?
Press the HUMIDITY button repeatedly to cycle between 30% and 80% in 5% increments. The selected humidity will flash on the display and then set after a few seconds.
When should I empty the water tank?
The unit will display FULL TANK and automatically shut off when the tank is full. Empty the tank, replace it securely, and the unit will restart.
Can I use a continuous drain hose?
Yes, connect a standard garden hose (12 mm diameter) to the continuous drain outlet at the back of the unit. Ensure the hose slopes downward for proper drainage.
How do I clean the air filter?
Remove the filter grille, take out the mesh filter, and wash it with warm soapy water. Rinse thoroughly, let it dry completely, then reinstall. Clean every two weeks for optimal performance.
What does the auto defrost function do?
When operating in low temperatures (<12°C), the unit may frost on the coils. Auto defrost activates periodically to melt the frost, ensuring efficient operation.
Why is the unit not collecting water?
Check if the room humidity is already low (<40%). Ensure the filter is clean, the tank is properly seated, and the unit is not in fan-only mode. If the humidity target is set higher than room humidity, the compressor won't run.
How loud is the unit during operation?
The noise level is approximately 45 dB(A), comparable to a quiet conversation. You can set the fan to low speed for quieter operation.
Can I use an extension cord?
It is not recommended. Plug the dehumidifier directly into a grounded wall outlet. If an extension cord is necessary, use one with a rating of at least 10A and a 3-prong plug.
How do I set the timer?
Press the TIMER button to set the number of hours (1-24) until the unit turns off. The timer indicator will light up. To cancel, press the button again until 0H appears.
What does the error code E1 mean?
Error code E1 indicates a problem with the humidity sensor. Turn off the unit, unplug it, wait 10 minutes, and restart. If the error persists, contact customer support.
User questions about EcoDry Pro 50 Argoclima
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dehumidifier in PDF format for free! Find your manual EcoDry Pro 50 - Argoclima and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EcoDry Pro 50 by Argoclima.