WorkCentre 5020/B - Printer XEROX - Free user manual and instructions
Find the device manual for free WorkCentre 5020/B XEROX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multifunction Printer (Print, Copy, Scan) |
| Brand | Xerox |
| Model | WorkCentre 5020/B |
| Technology | Laser, Black & White |
| Print Speed | Up to 20 ppm (A4) |
| Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets (standard tray), 50 sheets (bypass) |
| Duplex Printing | Manual (optional automatic) |
| Dimensions (W x D x H) | 410 x 375 x 365 mm (approximately) |
| Weight | Approximately 11.5 kg |
| Power Consumption | Standby: <10 W, Operating: <500 W |
| Power Supply | 220-240 V AC, 50/60 Hz |
| Functions | Print, Copy, Scan (color scan) |
| Connectivity | USB 2.0, Ethernet 10/100Base-TX |
| Monthly Duty Cycle | Up to 20,000 pages |
| Toner Cartridge | Replaceable, approx. 2,500 pages yield |
| Maintenance | Clean paper path and rollers periodically; replace toner as needed |
| Safety | Class 1 laser product; avoid exposure to laser beam |
| Repairability | User-replaceable toner, drum, and rollers; service manual available |
| Included Consumables | Starter toner cartridge, power cord, user guide |
Frequently Asked Questions - WorkCentre 5020/B XEROX
How do I load paper into the WorkCentre 5020/B?
Open the main paper tray, adjust the paper guides to fit the paper size, and load paper (e.g., A4) ≤250 sheets. Close the tray. Alternatively, use the bypass tray for special media.
How do I replace the toner cartridge?
Open the front cover, remove the old toner cartridge by pulling the green lever, unpack the new cartridge, shake it gently, and insert until it clicks. Close the cover.
What should I do if the printer says 'Paper Jam'?
Open the front cover, remove the toner cartridge to access the jam area. Gently pull out any stuck paper from the rollers or fuser. Clear all paper pieces, then reassemble.
How do I connect the printer to my computer?
Connect via USB cable or Ethernet. Install the driver from the included CD or download from the Xerox website. For network, set a static IP or use DHCP.
How do I perform a basic copy?
Place the original on the scanner glass (face down) or in the document feeder (face up). Press the 'Copy' button, select number of copies, then press 'Start'.
My printer is printing blank pages. What to do?
Check if the toner cartridge is installed correctly and has toner. Ensure paper is loaded properly. Run a test print from the control panel. If still blank, try a different cartridge.
How do I clean the printer?
Unplug the printer. Use a lint-free cloth slightly damp with water to wipe the exterior and paper trays. Do not use solvents. Clean the scanner glass with a glass cleaner.
What is the maximum paper size supported?
The standard tray supports letter, legal, A4, A5, and B5. The bypass tray can handle up to 216 x 356 mm (legal size) and custom sizes.
How do I set the printer to power-save mode?
Press the 'Power Saver' button on the control panel. The printer will enter sleep mode after a period of inactivity. To adjust timeout, use the settings menu.
Where can I find the user manual or service documentation?
The user manual is available on our site (notice-facile.com) or at support.xerox.com. Search for 'WorkCentre 5020/B' to download PDF.
User questions about WorkCentre 5020/B XEROX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual WorkCentre 5020/B - XEROX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WorkCentre 5020/B by XEROX.