SN278I01TG - Dishwasher SIEMENS - Free user manual and instructions
Find the device manual for free SN278I01TG SIEMENS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Model | SN278I01TG |
| Brand | Siemens |
| Capacity (Place Settings) | 14 |
| Energy Efficiency Class | A+++ |
| Noise Level (dB) | 44 |
| Water Consumption per Cycle (L) | 9.5 |
| Energy Consumption per Cycle (kWh) | 0.92 |
| Height (cm) | 81.5 |
| Width (cm) | 59.8 |
| Depth (cm) | 55.0 |
| Weight (kg) | 35 |
| Power Supply (V / Hz) | 220-240 / 50 |
| Programs | Eco, Intensive, Quick 45°C, Auto, Glass 40°C, Pre-Rinse |
| Drying System | Heat Exchanger + Zeolith |
| Water Connection | Hot or Cold Water (max 60°C) |
| Child Lock | Yes (electronic button lock) |
| Leak Protection | AquaStop |
| Filter System | Self-cleaning 3-layer filter |
| Maintenance | Clean spray arms and filters regularly; descale as needed |
| Spare Parts Availability | At least 10 years after discontinuation |
Frequently Asked Questions - SN278I01TG SIEMENS
How do I start a wash cycle on the Siemens SN278I01TG?
Press the On/Off button, select a program using the program selector, and press Start. Ensure the door is closed tightly.
What should I do if the dishwasher does not start?
Check if the door is fully closed, the power cord is plugged in, and the water supply is open. Also ensure the Child Lock is deactivated.
How to clean the filter of the SN278I01TG?
Turn off the dishwasher, remove the lower rack, unscrew the filter assembly, rinse under running water, and replace. Clean after every 10-15 cycles.
What does error code E15 mean?
E15 indicates a water leak. The AquaStop system has activated. Turn off the water supply, unplug the dishwasher, and contact service.
How much salt and rinse aid should I use?
Fill the salt reservoir with dishwasher salt until full (approx. 1.5 kg). Set the rinse aid dosage to 4-6 depending on water hardness.
Why are dishes not drying properly?
Ensure rinse aid is filled and the dosage is adequate. Use the Extra Dry option if available. Open the door slightly after cycle ends.
Can I use regular dish soap instead of dishwasher detergent?
No, only use dishwasher detergent (powder, gel, or tabs). Regular soap causes excessive suds and may damage the machine.
How to reset the SN278I01TG?
Press and hold the Start button for 3 seconds during a cycle to cancel. To factory reset, unplug for 1 minute and plug back in.
What is the recommended loading for best cleaning?
Place plates facing inward, ensure spray arms can rotate freely. Do not block detergent dispenser. Use the Top Rack for cups and glasses.
How do I activate the child lock?
Press and hold the Child Lock button (usually marked with a key icon) for 3 seconds. The indicator light will illuminate when active.
User questions about SN278I01TG SIEMENS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SN278I01TG - SIEMENS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SN278I01TG by SIEMENS.