KDC350CNGi-SR - Barcode Reader Koamtac - Free user manual and instructions
Find the device manual for free KDC350CNGi-SR Koamtac in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bluetooth Barcode Scanner |
| Brand | Koamtac |
| Model | KDC350CNGi-SR |
| Dimensions (H x W x D) | 118 x 64 x 32 mm |
| Weight | 150 g (including battery) |
| Power Source | Rechargeable Li-ion battery, 2600 mAh |
| Barcode Types Supported | 1D (UPC, EAN, Code 128, etc.) and 2D (QR, Data Matrix, etc.) |
| Connectivity | Bluetooth 5.0, USB-C |
| Scan Engine | SE2707 or equivalent CMOS sensor |
| Reading Distance | Up to 45 cm for 1D, up to 30 cm for 2D |
| Operating Temperature | -20°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Drop Specification | 1.5 m drop to concrete |
| Cleaning and Maintenance | Wipe exterior with a soft, dry cloth. Do not use harsh chemicals. |
| Laser Safety | Class 1 laser product (safe for eyes) |
| Spare Parts Available | Battery pack, USB cable, holster |
| Repairability | Rechargeable battery is user-replaceable. Other repairs should be done by authorized service. |
| Water and Dust Resistance | IP54 rating |
Frequently Asked Questions - KDC350CNGi-SR Koamtac
How do I turn on the KDC350CNGi-SR?
Press and hold the power button for about 2 seconds until the LED flashes.
How do I pair the scanner with my device via Bluetooth?
Enable Bluetooth on your device, then scan the 'Pairing' barcode from the manual. The scanner will appear as 'KDC350CNGi-SR'.
What barcode types can the KDC350CNGi-SR read?
It reads common 1D barcodes like UPC, EAN, Code 39, Code 128, and 2D barcodes like QR Code, Data Matrix, and PDF417.
How do I charge the scanner?
Connect the included USB-C cable to the scanner and a USB power source. The LED indicates charging status.
Can I use the scanner while charging?
Yes, the scanner can be used in pass-through mode while connected via USB-C.
How do I clean the scanner?
Turn off the scanner and wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
What is the IP rating of the KDC350CNGi-SR?
It has an IP54 rating, meaning it is protected against dust and splashing water.
How do I replace the battery?
Remove the battery cover (if applicable) and disconnect the old battery. Insert the new battery, ensuring proper polarity, then replace the cover.
What should I do if the scanner stops scanning?
Check the battery level, ensure Bluetooth is connected, and clean the scan window. If the issue persists, reset the scanner by pressing the reset button (use a paperclip).
Where can I find the user manual?
The user manual is available on the official Koamtac website or can be downloaded from notice-facile.com.
User questions about KDC350CNGi-SR Koamtac
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual KDC350CNGi-SR - Koamtac and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KDC350CNGi-SR by Koamtac.