TIGD-CI3 (V1.1) - Motherboard ECS - Free user manual and instructions
Find the device manual for free TIGD-CI3 (V1.1) ECS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motherboard |
| Brand | ECS |
| Model | TIGD-CI3 (V1.1) |
| Form Factor | Mini-ITX |
| Dimensions | 170 x 170 mm |
| Weight (with packaging) | Approximately 0.5 kg |
| Power Supply | DC Power Jack (12V/19V typical) |
| CPU Socket | LGA 1150 or 1151 (estimated) |
| Supported Memory | DDR3L or DDR4 SO-DIMM (up to 16GB) |
| Storage Interfaces | 2x SATA III, 1x M.2 (SATA or PCIe) |
| Video Outputs | HDMI, VGA, DisplayPort |
| Audio | Realtek ALC662, 3.5mm jacks |
| LAN | Realtek RTL8111G Gigabit Ethernet |
| USB Ports | 4x USB 2.0, 2x USB 3.0 |
| Expansion Slots | 1x Mini-PCIe (for WiFi) |
| Operating Temperature | 0°C to 50°C |
| Cleaning | Use a soft dry cloth to remove dust. Do not use liquids or solvents. |
| Safety Precautions | Disconnect power before installation. Use anti-static wrist strap. Avoid contact with components. |
| Spare Parts & Repairability | CMOS battery replaceable. Other components (CPU, RAM) upgradeable. Refer to manual for disassembly. |
| General Information | Fanless design for quiet operation. Suitable for thin clients, HTPCs, and embedded systems. |
Frequently Asked Questions - TIGD-CI3 (V1.1) ECS
What type of CPU does the ECS TIGD-CI3 support?
It supports Intel processors with LGA 1150/1151 socket, typically low-power variants like Celeron, Pentium, or Core i3.
How do I install the motherboard into a case?
Use standoffs matching the Mini-ITX mounting holes. Align the motherboard and secure with screws. Ensure the I/O shield is in place.
What power supply does the TIGD-CI3 require?
It uses an external DC power adapter (12V or 19V, typically 60W). Connect to the DC jack on the board.
How can I update the BIOS?
Download the latest BIOS from ECS website to a USB drive. Enter BIOS setup (press DEL during boot) and use the EZ Flash utility.
Why is there no display output?
Check that the monitor cable is connected to the correct video port. Ensure the CPU and memory are properly seated. Clear CMOS if needed.
Can I use DDR4 memory?
It depends on the specific revision. V1.1 may support DDR3L or DDR4 SO-DIMM. Check the motherboard markings for supported memory type.
How do I enable onboard WiFi?
Install a compatible WiFi module into the Mini-PCIe slot and connect the antenna cables. Enable WiFi in BIOS under 'Onboard Devices'.
What is the maximum RAM capacity?
Typically up to 16GB (2x8GB) for DDR3L/DDR4 SO-DIMM modules.
Does the motherboard support 4K output?
Yes, via HDMI or DisplayPort. The supported resolution depends on the CPU graphics.
How do I reset the BIOS?
Power off and unplug. Remove the CMOS battery for 30 seconds, or use the CLR_CMOS jumper on the board.
User questions about TIGD-CI3 (V1.1) ECS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motherboard in PDF format for free! Find your manual TIGD-CI3 (V1.1) - ECS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TIGD-CI3 (V1.1) by ECS.