MIELE DA 422-4 Ext - Range hood

DA 422-4 Ext - Range hood MIELE - Free user manual and instructions

Find the device manual for free DA 422-4 Ext MIELE in PDF.

📄 36 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice MIELE DA 422-4 Ext - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeRange Hood
BrandMiele
ModelDA 422-4 Ext
Width90 cm
Depth50 cm
Height45 cm
Weight16 kg
Power Supply220-240 V, 50 Hz
Max Extraction Rate600 m³/h
Noise Level (max)65 dB
Grease Filter TypeStainless steel mesh
Carbon FilterOptional, recirculation mode
ControlsElectronic push buttons with LED display
Lighting2 x 20 W halogen or LED (depending on version)
Energy Efficiency ClassB
Installation TypeWall-mounted chimney hood
Venting SystemDucted (extraction) or recirculation with carbon filter
Airflow Control3 speeds + intensive
Safety FeaturesAuto shut-off timer, safety switch
MaintenanceClean grease filters every 4 weeks; replace carbon filter every 6 months
Warranty2 years standard (subject to terms)

Frequently Asked Questions - DA 422-4 Ext MIELE

How do I clean the grease filters?
Remove the grease filters and wash them in warm water with a mild detergent. Alternatively, you can place them in the dishwasher. Allow them to dry completely before reinstalling.
Can I use the hood in recirculation mode?
Yes, you can install an optional carbon filter to use the hood in recirculation mode. The charcoal filter absorbs odors.
How do I replace the light bulb?
Switch off the hood and let the bulb cool. Remove the cover, replace the bulb with a compatible 20 W halogen or LED, and reattach the cover.
What is the warranty period?
Miele offers a standard 2-year warranty for this product. Extended warranty options may be available through your retailer.
How to activate the intensive speed?
Press the intensive speed button (usually marked with a symbol). The hood will run at maximum power for a set time and then return to the previous speed.
Is the carbon filter included?
No, the carbon filter is not included and must be purchased separately if you plan to use recirculation mode.
Why is the hood making noise?
Noise can come from loose ducting, unbalanced motor, or blocked filters. Check all connections and ensure filters are clean. If the problem persists, contact customer service.
How to install the ducting?
Use rigid or flexible ducting with a diameter of 150 mm. Connect the hood outlet to the duct, ensuring minimal bends. Seal joints with aluminum tape.
What should I do if the hood doesn't turn on?
Check the power supply and circuit breaker. Ensure the hood is properly connected. If it still doesn't turn on, there may be an internal fault; contact Miele service.
How to reset the filter indicator?
After cleaning or replacing the filters, press and hold the filter reset button (often the 'Timer' button) for 3 seconds until the indicator light turns off.

User questions about DA 422-4 Ext MIELE

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Range hood in PDF format for free! Find your manual DA 422-4 Ext - MIELE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DA 422-4 Ext by MIELE.

USER MANUAL DA 422-4 Ext MIELE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : MIELE

Model : DA 422-4 Ext

Category : Range hood