AWO 9147 - Washing machine WHIRLPOOL - Free user manual and instructions
Find the device manual for free AWO 9147 WHIRLPOOL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Front-Load Washing Machine |
| Model | AWO 9147 |
| Brand | Whirlpool |
| Capacity | 9 kg |
| Spin Speed | 1400 rpm |
| Dimensions (H x W x D) | 85 x 60 x 59 cm |
| Weight | 72 kg |
| Energy Class | A+ |
| Water Consumption per Cycle | 45 L |
| Annual Energy Consumption | 195 kWh |
| Noise Level (Wash/Spin) | 55 / 77 dB(A) |
| Programs | Cotton, Synthetics, Delicates, Wool, Quick 30', Rinse & Spin, Drum Clean |
| Temperature Settings | Cold – 90°C |
| Special Features | Delay Start, Child Lock, Load Balancing, Foam Control |
| Drum Material | Stainless Steel |
| Display | LED |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Spare Parts Availability | Door seal, belt, pump, heater, control board |
| Maintenance | Clean door filter monthly; drum clean cycle every 2 months |
| Safety | Overheating protection, water stop system, child lock |
Frequently Asked Questions - AWO 9147 WHIRLPOOL
What is the maximum capacity of the Whirlpool AWO 9147?
The Whirlpool AWO 9147 has a maximum load capacity of 9 kg for cotton programs.
How do I activate the child lock?
Press and hold the Start/Pause button for 5 seconds until the lock icon appears on the display. To deactivate, repeat the same procedure.
What should I do if the machine does not drain?
Check the drain hose for kinks or blockages. Clean the pump filter located at the bottom front panel. Ensure the drain pump is not blocked.
How can I clean the drum?
Run an empty cycle with a drum cleaning program (if available) or use a washing machine cleaner. Set temperature to 90°C and add half a cup of white vinegar or a proprietary cleaner.
Why is the washing machine noisy during spinning?
Uneven load distribution can cause noise. Try to redistribute laundry evenly. Also check for foreign objects in the drum or pump filter. Ensure the machine is level.
How do I install the appliance?
Remove all shipping bolts, connect the water inlet hose to a cold water tap, attach the drain hose to a standpipe or sink, and level the machine using the adjustable feet. Ensure the electrical connection is 220-240V.
What do the error codes mean?
Common error codes: F01 (motor problem), F04 (heating fault), F05 (drain failure), F08 (water level sensor). Refer to the manual for specific troubleshooting.
How do I use the delay start function?
Select your desired program, then press the Delay Start button repeatedly to set the delay time (up to 24 hours). Press Start/Pause; the machine will begin the cycle after the set delay.
What type of detergent should I use?
Use a high-efficiency (HE) detergent suitable for front-load washers. For best results, follow the dosage instructions on the detergent package based on water hardness and load size.
How do I replace the door seal?
Disconnect power. Remove the outer ring screws, detach the old seal, clean the groove, and fit the new seal ensuring the drain holes are at the bottom. Reinstall the ring and tighten screws. Refer to spare parts guide.
User questions about AWO 9147 WHIRLPOOL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual AWO 9147 - WHIRLPOOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AWO 9147 by WHIRLPOOL.