i.Beat GhettoBlaster mini - Mp3 player TrekStor - Free user manual and instructions

Product Type	MP3 Player
Model	i.Beat GhettoBlaster mini
Brand	TrekStor
Dimensions (approx.)	80 x 60 x 20 mm
Weight (approx.)	50 g
Power Source	Built-in rechargeable battery, charged via USB
Charging Time	3-4 hours (max)
Operating Time	Up to several hours (actual battery life after 10 charge cycles)
Storage	External microSD/SDHC card (card included)
Supported File Formats	MP3, WMA, OGG
Audio Output	3.5mm headphone jack
Controls	Buttons: Play/Pause (power), Next, Previous, Volume +/-, microSD slot
Display	Status LED only (no screen)
Connectivity	USB 2.0 (mini USB)
System Requirements	Windows XP/Vista/7, Mac OS X 10.4+, Linux kernel 2.6.x
Card Slot	microSD/SDHC (supports up to 32GB)
Safety	Do not expose to moisture, high temperatures, or direct sunlight; clean with dry cloth
Operating Temperature	5°C to 40°C
Included Accessories	USB cable, microSD card, earphones (32 Ohm)

Frequently Asked Questions - i.Beat GhettoBlaster mini TrekStor

How do I turn on the i.Beat GhettoBlaster mini?

Press and hold the ▶ button (play/pause) for about 2 seconds. To turn off, press and hold the same button again for 2 seconds.

My player freezes and does not respond. What should I do?

First, try resetting the device. Insert a bent paper clip carefully into the headphone jack to press the reset button. If that fails, turn the player off and on, or update the firmware from the TrekStor website.

Why can't I hear any sound from the earphones?

Ensure the earphones are fully inserted into the headphone jack, the volume is turned up, and an audio file is playing. Also check that the file format is supported (MP3, WMA, OGG).

How do I transfer music to the player?

Connect the player to your computer via USB. It will appear as a removable drive. Copy audio files (MP3, WMA, OGG) directly into the drive. Eject safely before disconnecting.

Why won't my WMA files play?

The files may be DRM-protected. Use Windows Media Player to transfer DRM WMA files. Check the TrekStor website to confirm DRM support for this model.

How do I charge the battery?

Connect the player to a computer USB port using the included cable. The status LED blinks once per second during charging. When full, the LED stays on. Charge for 3-4 hours initially.

What is the maximum microSD card size supported?

The player supports microSD and microSDHC cards up to 32GB (FAT32 formatted). A card is included with the device.

How do I format the microSD card?

Connect the player to a computer. On Windows, right-click the removable drive and select Format, choosing FAT32 file system. On Mac, use Disk Utility to erase with MS-DOS (FAT) format. Backup data first.

Can I use other headphones?

Yes, but use headphones with 32 Ohm impedance to avoid damage. The included earphones are optimized. Lower impedance may cause distortion or damage.

How do I clean the player?

Use a soft, dry cloth or brush. Do not use solvents, thinners, or chemical cleaners. Keep away from moisture and dust.

USER MANUAL i.Beat GhettoBlaster mini TrekStor

i.Beat

Ghetto

Blaster

mini

INDEX

DE 4

EN 16

IT 27

ES 38

SE 50

BEDIENUNGSANLEITUNG

Thank you for buying the TrekStor i.Beat GhettoBlaster mini. We are confident that this product will be the source of much enjoyment. Please read the following chapters carefully so that you can become acquainted with the advantages of this product and its use.

If you have problems with this product, you can quickly get assistance. Only in extremely rare cases will you need to return this product to your dealer. You can find answers to the most frequently asked questions at our website, www.trekstor.de, under "SERVICE" → "SUPPORT". You can of course also contact our award-winning support team by filling out the support form on our website, or by e-mail or telephone (see the back of these instructions). You will be surprised at how quickly we can help you.

Current product information and a list of the file formats supported by your MP3 player can be found at the TrekStor Website (www.trekstor.de).

At the time of printing, your MP3 player supports the following file formats: MP3, WMA and OGG.

If you have difficulties with this product or its operation, please read the "FAQ" section. Here you will find answers to the most frequently asked questions.

System requirements

Computer:

• Windows® XP/Vista, Mac® OS X from version 10.4, Linux® from kernel 2.6.x
  • USB 1.1 port (high-speed USB 2.0 port recommended)

i Please charge your MP3 player as described in these operating instructions for at least 3 to 4 hours before initial use.

1) Controls and connections of the TrekStori.Beat GhettoBlaster mini

Please look at the illustrations on the inside of the unfolding cover.

A) ▶ button: Starts and pauses the playback. If the button is pressed for a longer time, the MP3 player is switched.
B) Status LED
C) Headphone jack
D) USB port: This port is used for transferring data and charging the MP3 player.
E) ☑ button: Lowers the volume.
F) v+ button: Raises the volume.
G) ▶ button: Changes to the next track or fast forwards within a track.
H) ◀ button: Changes to the previous track or rewinds within a track.
I) microSD/SDHC card slot (microSD card is included in the delivery)

2) Connecting the TrekStor i.Beat GhettoBlaster mini to a computer

Use the included USB cable to connect your MP3 player to a USB port on your computer.

The MP3 player does not have an internal memory. The usage can only take place via a microSD/SDHC memory card. Preferably please use for your music files the microSD card, which is included in the delivery.

Windows® XP/Vista™/7

Your operating system automatically detects the MP3 player and adds a "DEVICE WITH REMOVABLE STORAGE" to "MY COMPUTER"/"COMPUTER".

Mac ^® OS X from 10.4

Your operating system automatically detects the MP3 player and adds a "DRIVE" to "DESKTOP".

3) Charging the TrekStor i.Beat GhettoBlaster mini

The MP3 player starts charging automatically as soon as you connect it to a computer. While the MP3 player is charging, the status LED blinks once every second. When the battery is full (after a maximum of three to four hours), the status LED is lit permanently and the MP3 player automatically stops charging to prevent overcharging.

The maximum operating time of the MP3 player can be reached only after approximately 10 battery charging cycles have been completed.

4) Exchanging data with the TrekStor i.Beat GhettoBlaster mini

Windows® XP/Vista™/7

a) Select the desired files (such as MP3) with the mouse. Copy these files by clicking them with your right mouse button ("COPY").
b) Under "MY COMPUTER" or "COMPUTER", select the device with removable storage, "TREKSTOR".
c) Right-click the device and select " PASTE" to start copying. After copying has completed, the data will be available on your MP3 player.

Mac ^® OS X from 10.4

Select the desired files (such as MP3) with the mouse. Drag and drop the files in the "FINDER" to the drive symbol of your MP3 player.

5) Logging off and disconnecting the TrekStor i.Beat GhettoBlaster mini from the computer

i Please follow the recommended logout procedure to prevent damage to the device or data loss!

Windows® XP/Vista™/7

At the bottom right on the task bar, left-click the "SAFELY REMOVE HARDWARE" icon. In the popup menu that appears, left-click "SAFELY REMOVE MASS STORAGE DEVICE - DRIVE" to select it. You can now disconnect your MP3 player from the computer.

Mac ^® OS X from 10.4

You must remove the drive from the "DESKTOP" before you disconnect your MP3 player. Click the relevant drive icon and drag it to the trash icon.

6) Operation of the TrekStor i.Beat GhettoBlaster mini

Your MP3 player can generate high volumes; for this reason, make sure that the volume is not too high while you are listening to it. Further information on this topic can be found at the end of these operating instructions.

Turning the device on and off

To start your MP3 player, press the ▶ button for approx. 2 seconds. To switch your MP3 Player off again press the ▶ button as well for approx. 2 seconds.

Starting and pausing playback

Press the ▶■ button for approx. 2 seconds to start the playback of an audio file. In order to pause the playback, briefly press the ▶■ button. Another press of the ▶■ button resumes the playback.

Changing the track / Fast-forwarding and rewinding within a track

Briefly press the ▶ button to select the next track. If you press the ◀ button you switch to the prior track.

You can fast-forward or rewind within the track by holding down the ▶▶▶ or ◀◀◀ button.

Adjusting the volume

Briefly press the v⁺ - or v^- button to raise or lower the volume.

i If you hold down the v+ - or v- button, the volume changes at a constant rate.

Playback mode

In the playback mode all of the tracks are played in sequence.

ALL the data on the MP3 player will be deleted when you format it.

Windows® 2000/XP/Vista™/7

a) Connect your MP3 player to a USB port on your computer.
b) Back up all the important files on your MP3 player onto your computer.
c) Open " My COMPUTER," or "COMPUTER" and right-click your MP3 player ("DEVICE WITH REMOVABLE STORAGE").
d) Select " FORMAT..." from the popup menu.

e) Select the "FAT32" option under "FILE SYSTEM" from the dialog window that appears.
f) Click the " START" button to start the formatting.
g) Please wait until formatting has completed.

Mac ^® OS X from 10.4

a) Connect your MP3 player to a USB port on your computer.
b) Back up all the important data of your MP3 player on your computer.
c) Open " Disk UTILITY" via "FINDER" → "PROGRAMS" → "UTILITIES".
d) Click the MP3 player.
e) From the right window, select the "ERASE" option.
f) Using the drop-down list, select the "MS-DOS FILE SYSTEM" for your MP3 player.
g) Click the " ERASE" button to start formatting.
h) Please wait until formatting has completed.

8) FAQ - troubleshooting

This section contains information on eliminating problems with your MP3 player.

My i.Beat GhettoBlaster mini freezes and does not react any more

If this repeatedly occurs for a specific audio file, the file may be damaged. Delete the file. If this does not eliminate the problem, reset the player if possible. The reset button is placed at the rear end of the headphone output and can be reached e.g. by a bent-up paper clip, which is carefully inserted into the headphone output. A brief press switches the player off. Through pressing the ▶ button the player can be switched on a again as usual.

My MP3 player cannot be turned on.

No power

When the battery is dead, charge your MP3 player either with a USB cable connected to your PC, or with a USB charger.

i External effects

External effects (such as an electrostatic discharge) can cause your MP3 player to malfunction. If the malfunction continues after you turn your MP3 player off and on, update the firmware (the software of the MP3 player). The current firmware for your MP3 player is on our website under "Downloads". If you have any questions concerning the firmware update that were not answered in the instructions, please contact our support team.

My MP3 player does not respond when I press a button. My MP3 player freezes.

If this repeatedly occurs for a specific audio file, the file may be damaged. Delete the file.

If this does not eliminate the problem, reset the player. To do this, switch your MP3 player on and off. If your MP3 players still freezes, update the firmware.

I do not hear any music from the earphones/headphones.

• Check if an audio file is being played. If not, start playback.
  • Make sure that the stereo jack of the earphones/headphones is firmly seated in the jack socket.
• Check if the volume of your MP3 player is loud enough.

I transferred files to my MP3 player. The MP3 player cannot play these files.

i Wrong file format

The files might be in a format that your MP3 player cannot play. The file formats supported by your MP3 player can be found on the respective datasheet on the TrekStor homepage at www.trekstor.de.

I transferred WMA audio files to my MP3 player. The MP3 player cannot play these files.

The files are copyprotected.

If the files are WMA DRM copy-protected, you need to copy them through the Windows Media® player. Check beforehand if your MP3 player can play WMA DRM copy-protected files. You can find this information on the datasheet of your MP3 player on the TrekStor homepage at www.trekstor.de.

I transferred audio files to my MP3 player from my Mac®. The MP3 player cannot play these files.

i Wrong file format

Audio files in AAC format, for example, files that you generate with iTunes ^® , cannot be played on most MP3 players. Convert these files into MP3 format using a current iTunes ^® program or a different program. Audio files downloaded from the Internet may have protective mechanisms that prevent conversion.

The audio files on my MP3 player are not played in the correct sequence.

Sort your audio files on your computer before you copy them to your MP3 player. Copy the audio files to a subfolder and sort the audio files in this folder by renaming them (e.g. by adding numbers such as "001_Title", "002_Title", etc.). Then copy the entire folder to your MP3 player.

The playback mode "Shuffle" has been selected.

If the playback mode "Shuffle" has been selected, switch to the "Repeat all" playback mode.

How can I create MP3 files?

To convert audio files (such as music from a CD) into the MP3 format, you need an MP3 encoder (such as the presently free "Audiograbber" program that can be obtained from www.audiograbber.de). Instructions and assistance for operating the program can be found under the help function of the program.

Instructions for safety and use:

Only qualified persons may perform technical work on the product. The product may not be opened or changed. The components cannot be serviced by the user.

Never expose the device to moisture, condensation and liquids.

Protect the device from extremely high and low temperatures and temperature fluctuations. Use the device within an ambient temperature of 5° C to 40° C.

Never place the device close to a source of heat, and protect it from direct sunlight.

Make sure that the surroundings are as dust-free as possible when you use and store the device.

Never clean the surface of the device with solvents, paint thinners, cleansers or other chemical products. Instead, use a soft, dry cloth or soft brush.

The capacity indicated by your operating system can be different than the actual capacity of your device. Like most manufacturers of computer hardware, TrekStor uses the prefixes for units (e.g. 1 GB = 1.000.000.000 bytes) as prescribed by the International System of Units (SI). Unfortunately, many operating systems do not comply with this norm and display a lower capacity because they base their calculations on the assumption that 1 GB = 2³⁰ bytes = 1.073.741.824 bytes.

In certain circumstances, exposing the device to an electrostatic discharge may interrupt the data transfer between the device and the computer and impair the functions of the device. If this occurs, the device should be unplugged from the USB port and then plugged in again.

Do not use USB cables longer than 3 meters.

Batteries/rechargeable batteries contain chemical substances and must be disposed of properly. Batteries/rechargeable batteries should not be thrown away in household garbage. They can be brought to the public collection points of your community or wherever batteries/rechargeable batteries are sold.

Notes:

• This MP3 player is optimized for the provided earphones (32 Ohm impedance). Using other earphones/headphones with a lower impedance can damage the MP3 player or earphone/headphone, especially MP3 players with two earphone jacks.
  • Note: This device can produce high sound volumes. In order to avoid hearing loss that can occur immediately, in the future, or gradually, you should not listen at high volumes for extended periods. This applies regardless of whether you listen with speakers, headphones, or earphones. If you notice a ringing noise in your ears, lower the volume immediately or stop using the MP3 player. Please keep in mind that permanent hearing loss can first appear at a later point in time. While you may become accustomed to higher volumes over time so that they may seem normal to you, your sense of hearing may still have been impaired by this. The higher you set the volume, the faster your sense of hearing can be damaged.
  • Note: Using earphones/headphones while driving a motor vehicle is not recommended and is prohibited in some countries. Always drive carefully and with full concentration. Stop using your MP3 player if you become distracted or interrupted by it when driving a motor vehicle or during other activities that require your full attention.

The manufacturer retains the right to continually improve the product. These changes may be made without being directly described in these operating instructions. For this reason, the information provided in these operating instructions may not reflect the current state of the art.

The manufacturer only guarantees suitability for the product's intended purpose. In addition, the manufacturer is not responsible for damages or loss of data and subsequent consequences.

Copyright © 2010 TrekStor GmbH. All rights reserved. Other cited product or company names may be trademarks or brand names of the respective owner.

ISTRUZIONI PER L'USO

Instructions for removing the built in battery for safe disposal

The device must be turned off before the battery can be removed!

EC DECLARATION OF CONFORMITY

As manufacturer and importer respectively:

TrekStor GmbH

Kastanienallee 8 - 10

D-64653 Lorsch, Germany

herewith declares that the products

comply with the following directive(s):

• 2004/108/EC EMC Directive: Electromagnetic Compatibility

• 2006/95/EC Low Voltage Directive

The following norms were consulted to assess conformity:

• EN 55013:2001/A2:2006

Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement

• EN 55020:2007

Sound and television broadcast receivers and associated equipment – Immunity characteristics – Limits and methods of measurement

• EN 55022:2006

EMC: Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement

• EN 55024:1998/A2:2003

EMC: Information technology equipment – Immunity characteristics – Limits and methods of measurement

- EN 60065:2002 /A11:2008

Audio, video and similar electronic apparatus – Safety requirements

- EN 60950-1:2006

Information technology equipment – Safety – Part 1: General requirements

The CE symbol confirms that this product conforms with the above mentioned norms and regulations.

The manufacturer also declares the conformity of the product according to the following directives:

. 2001/95/EC General Product Safety

• 2002/95/EC RoHS: Hazardous substances in electrical and electronic equipment

Lorsch,

30.11.2010

Aaron Taylor, CTO

Support

	Hotline	Language
AT	+49 431 - 24 89 45 70** German
BE	+49 431 - 24 89 45 80** English
CH	+49 431 - 24 89 45 73** German
DE	01805 - TREKSTOR*
	01805 - 87 35 78 67* German
ES	+49 431 - 24 89 45 76** English
FR	+49 431 - 24 89 45 74** English
HU	+49 431 - 24 89 45 79** English
IT	+49 431 - 24 89 45 75** English
LU	+49 431 - 24 89 45 72** German, English
NL	+49 431 - 24 89 45 81** English
PL	+49 431 - 24 89 45 77** English
PT	+49 431 - 24 89 45 78** English
UK	+49 431 - 24 89 45 71** English
GR	+49 431 - 24 89 45 82** English
TR	+49 431 - 24 89 45 83** English
RU	+49 431 - 24 89 45 84** English
SE	+49 431 - 24 89 45 92** English
UA	+49 431 - 24 89 45 93** English
SI	+49 431 - 24 89 45 94** English
CA	+49 431 - 24 89 45 95** English
Other Countries	+49 431 - 24 89 45 99** English

If you want to contact our support via e-mail, you can do so via the online support form that you can find under "SERVICE" → "SUPPORT" on our website http://www.trekstor.de/en. The more detailed your support request is, the quicker and better we will be able to help you!

** Please check with your local telephone provider for connection costs.