HA 1 - Receiver Rockboard - Free user manual and instructions
Find the device manual for free HA 1 Rockboard in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power Supply Unit for Guitar Pedals |
| Brand | Rockboard |
| Model | HA 1 |
| Output Voltage | 9V DC |
| Number of Outputs | 8 Isolated Outputs |
| Total Current | 1000 mA |
| Per Output Current | 100 mA (max) |
| Input Voltage | 100-240V AC, 50/60Hz |
| Dimensions (W x D x H) | 180 mm x 120 mm x 45 mm |
| Weight | 0.6 kg |
| Power Cord | Detachable, 1.5m |
| Protection Features | Short Circuit, Overload, Overvoltage |
| Mounting | Compatible with Pedalboards (Velcro or Screws) |
| LED Indicators | Power On per Output |
| Cable Included | 5 Daisy Chain Cables |
| Certifications | CE, FCC, RoHS |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Maintenance | Wipe with dry cloth; do not use liquids |
| Safety | Do not open; risk of electric shock |
| Spare Parts | Available from Rockboard |
Frequently Asked Questions - HA 1 Rockboard
Can I power 9V pedals using the HA 1?
Yes, the HA 1 provides 9V DC output, suitable for most standard guitar pedals. Each output delivers up to 100 mA.
How many pedals can I connect?
The HA 1 has 8 isolated outputs. You can connect up to 8 pedals directly, or use daisy chains for more, but total current must not exceed 1000 mA.
Is the power supply isolated?
Yes, each output is isolated to reduce noise and hum, ensuring clean power for your pedalboard.
What type of power cord does it use?
The HA 1 uses a standard IEC C7 figure-8 power cord, detachable for easy replacement.
Can I use it with effects pedals that require more than 100 mA?
No, each output is limited to 100 mA. For higher current pedals, consider using a dedicated power supply.
How do I mount the HA 1 on my pedalboard?
You can attach it using Velcro strips (included) or screw it onto the board using the mounting holes.
What should I do if an output LED does not light up?
Check the pedal connection and cable. If the issue persists, try a different output. If still not working, contact Rockboard support.
Is the HA 1 safe to use with international voltage?
Yes, it accepts 100-240V AC, so it works worldwide with the appropriate plug adapter.
How do I clean the unit?
Unplug the unit and wipe with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners.
Where can I find spare parts?
Spare parts like power cords and cables are available from Rockboard dealers or the official website.
User questions about HA 1 Rockboard
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual HA 1 - Rockboard and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HA 1 by Rockboard.