HL1100 - Log splitter SCHEPPACH - Free user manual and instructions

Product Type	Log Splitter
Brand	Scheppach
Model	HL1100
Power Source	Electric (230 V ~ 50 Hz)
Motor Power	1.5 kW (2 HP)
Max Splitting Force	11 tons
Max Log Length	520 mm
Max Log Diameter	250 mm
Cycle Time (Forward)	11 seconds
Cycle Time (Return)	8 seconds
Operating Position	Vertical / Horizontal
Dimensions (L x W x H)	1150 x 510 x 720 mm
Weight	68 kg
Oil Capacity	3.5 L (hydraulic oil)
Max Operating Pressure	250 bar
Safety Features	Two-hand operation, emergency stop, safety guard
Maintenance	Check oil level regularly; clean air filter; inspect hydraulic hoses
Warranty	2 years (statutory warranty)
Included Accessories	Log cradle, push stick, wedge

Frequently Asked Questions - HL1100 SCHEPPACH

How do I assemble the log splitter?

Refer to the assembly section in the manual. Typically, attach the wheels, tow bar, and legs using the provided bolts. Ensure all fasteners are tightened. For the HL1100, the assembly is straightforward with illustrated steps.

What type of hydraulic oil is recommended?

Use a high-quality hydraulic oil with viscosity ISO VG 32 or 46. The oil capacity is approximately 3.5 liters. Check the dipstick for correct level.

How do I bleed the hydraulic system?

Bleeding is necessary after first use or after oil change. Refer to Fig. 8 in the manual: Open the bleed screw, operate the splitter a few times without load, then close the screw. This removes trapped air.

What is the maximum log length I can split?

The HL1100 can handle logs up to 520 mm in length. Longer logs may not fit on the splitter bed.

Can the splitter be used horizontally and vertically?

Yes, the HL1100 can operate in both vertical and horizontal positions. For vertical splitting of heavy logs, adjust the support legs. Ensure the machine is stable.

How do I clean and maintain the log splitter?

Keep the machine clean from debris. Wipe down with a damp cloth. Check hydraulic hoses for leaks. Lubricate moving parts regularly. Store indoors.

What safety precautions should I follow?

Always use two hands to operate. Keep hands away from the splitting wedge. Wear protective gloves and goggles. Do not split logs with knots or nails. Ensure the area is clear.

Why is the splitter not moving forward?

Check the power supply and motor. Ensure the hydraulic oil level is adequate. Inspect the pump and valves for blockages. If the motor runs but no movement, air in the system may need bleeding.

Can I use an extension cord?

Yes, but use a heavy-duty extension cord with a minimum cross-section of 2.5 mm² and no longer than 10 meters to avoid voltage drop.

Where can I get spare parts?

Contact your local Scheppach dealer or authorized service center. Provide the model HL1100 and serial number. Many parts are available online.

USER MANUAL HL1100 SCHEPPACH

Industrial milling machine with a cylindrical sample and mechanical components, labeled 'scheppach SPOTUAL EDITION' and 'HL1100' (no readable text beyond labels)

Only for EU countries.
Do not dispose of electric tools together with household waste material! In observance of european directive 2002/96/EC on wasted electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.

France

Product photo of a manual tool holder with two wheel rim designs and a small inset showing the wheel (no text or symbols visible)

Mechanical component with metallic bracket and housing (no visible text or symbols)

Mechanical component with four tires and a cylindrical pin, labeled 'A' (no text or symbols on the main body)

Entlüften, Fig. 8

Close-up of a black and white electrical connector with three pins, mounted on a metal base (no visible text or symbols)

×	2006/42/EC
×	2006/95/EC
×	2004/108/EC
	2000/14/EC Annex V2005/88/EC

EN 60204-1; EN 609-1

The technical documentation is kept by

our authorized representative

Garantie D

Apparent defects must be notified within 8 days from the receipt of the goods. Otherwise, the buyer's rights of claim due to such defects are invalidated. We guarantee for our machines in case of proper treatment for the time of the statutory warranty period from delivery in such a way that we replace any machine part free of charge which provably becomes unusable due to faulty material or defects of fabrica-

tion within such period of time. With respect to parts not manufactured by us we only warrant insofar as we are entitled to warranty claims against the upstream suppliers. The costs for the installation of the new parts shall be borne by the buyer. The cancellation of sale or the reduction of purchase price as well as any other claims for damages shall be excluded.

Garantie FR