AquaShield AWH1064 - Chauffe-eau et ballon d'eau chaude PHILIPS - Free user manual and instructions

Product Type	Electric Water Heater
Model	AquaShield AWH1064
Brand	Philips
Capacity	100 liters
Dimensions (H x W x D)	900 x 450 x 450 mm
Weight	25 kg
Power Supply	220-240 V, 50/60 Hz
Power Consumption	2000 W
Heating Element	Copper immersion heater
Maximum Temperature	75°C
Thermostat	Adjustable, with overheat protection
Tank Material	Enameled steel with anti-corrosion coating
Insulation	Polyurethane foam, 50 mm thickness
Safety Features	Thermal cut-off, pressure relief valve, anti-dry burn
Installation	Wall-mounted (horizontal or vertical)
Energy Efficiency Class	C
Water Connection	1/2 inch BSP
Standby Heat Loss	1.2 kWh/24h
Included Accessories	Safety valve, mounting bracket, user manual
Warranty	2 years

Frequently Asked Questions - AquaShield AWH1064 PHILIPS

What is the capacity of the Philips AquaShield AWH1064 water heater?

The Philips AquaShield AWH1064 has a capacity of 100 liters, suitable for households with moderate hot water demand.

What are the dimensions and weight of the AWH1064?

Dimensions are approximately 900 x 450 x 450 mm and it weighs about 25 kg, making it compact for wall mounting.

What power supply does the AWH1064 require?

It requires a 220-240 V, 50/60 Hz electrical supply with a 2000 W heating element.

How do I set the temperature on the water heater?

The thermostat is adjustable via a dial on the front panel. Turn it to your desired temperature, typically between 30°C and 75°C.

What safety features does the AWH1064 have?

It includes a thermal cut-off to prevent overheating, a pressure relief valve, and anti-dry burn protection for safe operation.

How often should I perform maintenance on the water heater?

It is recommended to inspect the anode rod annually and drain the tank every 6 months to remove sediment buildup.

Can the AWH1064 be installed horizontally?

Yes, the water heater supports both horizontal and vertical wall-mounted installation.

What is the energy efficiency class of the AWH1064?

The energy efficiency class is C according to EU regulations, with a standby heat loss of approximately 1.2 kWh per 24 hours.

Is the tank resistant to corrosion?

Yes, the tank is made of enameled steel with an anti-corrosion coating and a sacrificial anode rod for added protection.

Where can I find spare parts or replacement parts for the AWH1064?

Spare parts such as thermostats, heating elements, and anode rods can be purchased from authorized Philips service centers or online retailers.

USER MANUAL AquaShield AWH1064 PHILIPS

©2023 AquaShield All rights reserved

Philips and the Philips Shield Emblem are registered trademarks of Koninklijke

Philips N.V. and are used under license. This product has been manufactured by and is sold under the

responsibility of Guangdong AquaShield Health Technology Company Limited and Guangdo

AquaShield Health Technology Company Limited is the warrantor in relation to this product.