AquaShield AWH5310 - Chauffe-eau et ballon d'eau chaude PHILIPS - Free user manual and instructions

Product Type	Electric Water Heater with Storage Tank
Model	AquaShield AWH5310
Brand	Philips
Capacity	30 Liters
Dimensions (H x W x D)	600 mm x 450 mm x 450 mm
Net Weight	18 kg
Power Supply	220-240 V, 50 Hz
Rated Power	2000 W
Energy Efficiency Class	C (estimated for 30L model)
Maximum Temperature	75 °C
Material	Steel tank with enamel coating
Protection	AquaShield protection system: anti-corrosion, anti-leakage, overheat protection
Control Type	Manual knob with thermostat
Heating Element	Copper immersion heater
Safety Valve	Pressure relief valve included
Installation	Wall-mounted horizontal or vertical
Water Connection	1/2 inch BSP female inlet and outlet
Maintenance	Descaling recommended every 6-12 months
Spare Parts	Heating element, thermostat, anode rod, pressure valve
Repairability Index	7.5 / 10 (easily replaceable heating element and thermostat)
Warranty	2 years (subject to terms)
Country of Origin	China

Frequently Asked Questions - AquaShield AWH5310 PHILIPS

How do I install the Philips AquaShield AWH5310 water heater?

Installation should be performed by a qualified professional. The heater can be mounted horizontally or vertically on a wall. Ensure proper water connections (1/2 inch BSP). Connect to the power supply (220-240 V) and fill the tank before switching on.

What is the recommended temperature setting?

For energy saving and safety, set the thermostat between 55°C and 60°C. Higher temperatures increase scale buildup and energy consumption.

How often should I descale the water heater?

Descaling is recommended every 6-12 months depending on water hardness. Use a descaler suitable for enamel tanks. Follow the instructions in the manual.

What does the AquaShield protection system do?

AquaShield protects against corrosion, leakage, and overheating. It includes a sacrificial anode rod, thermal cut-off, and pressure relief valve.

Why is my water heater not heating?

Check the power supply and circuit breaker. If power is on, the heating element or thermostat may be faulty. Contact a professional for replacement.

Can I use the water heater without water in the tank?

No, never operate the water heater without water. This will damage the heating element and cause a safety hazard. Always fill the tank before powering on.

How do I adjust the temperature?

Turn the thermostat knob located on the front panel. Some models have a hidden screw for fine adjustment. Refer to the manual for exact location.

What is the maximum pressure the tank can handle?

The tank is rated for a maximum pressure of 8 bar. The pressure relief valve opens at 8 bar to prevent overpressure.

How do I replace the sacrificial anode rod?

The anode rod should be checked every 2 years. To replace, drain the tank, unscrew the old rod (usually at the top), and install a new one. Use plumber's tape on threads.

Is the water heater energy efficient?

The energy efficiency class is estimated as C for a 30L model. To improve efficiency, insulate pipes and maintain temperature at 55-60°C. Consider using a timer.

USER MANUAL AquaShield AWH5310 PHILIPS

Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of Guangdong AquaShield Health Technology Company Limited and Guangdong AquaShield Health Technology Company Limited is the warrantor in relation to this product.

Exterior view of a Philips air conditioner unit (no visible text or symbols on body)

安装与使用说明书