CLLEKS20M - Uncategorized Cameo - Free user manual and instructions

Product Type	Emergency cut-off switch unit for effect laser
Model	CLLEKS20M
Brand	Cameo
Dimensions (W x H x D)	72 x 65 x 110 mm
Weight with Cable	1.1 kg
Connection Cable Length	20 metres, hard-wired
Connection Type	Screw-in 2-pin mini circular connector
Material	Plastic
Color	Black/yellow, red emergency stop push button
Laser Shutdown Method	Emergency stop push button and locking switch
Additional Features	2 keys for locking switch included
Safety Compliance	European safety regulations for laser class 3b and 4
Compatibility	Cameo lasers with screw-in interlocking 2-pin mini round plug connectors
Cleaning Instructions	Use a dry cloth
Disposal	Separate waste electrical and electronic equipment (WEEE)
Warranty	See manufacturer's website for current conditions
Installation Notes	Use only sufficiently stable stands/mounts; ensure secure installation

Frequently Asked Questions - CLLEKS20M Cameo

What is the Cameo CLLEKS20M used for?

The CLLEKS20M is an emergency cut-off switch designed to remotely shut down effect lasers (class 3b and 4) in dangerous situations, ensuring safety by interrupting the interlock circuit.

How does the emergency stop switch work?

Pressing the large red push button opens a contact in the interlock circuit, cutting power to the connected lasers. To reset, rotate the button in the direction of the arrow. The locking switch can also interrupt the circuit.

What is the cable length of the CLLEKS20M?

The device comes with a fixed 20-metre cable, hard-wired into the housing, providing flexibility for remote placement.

What type of connectors does the CLLEKS20M use?

It uses screw-in 2-pin mini circular connectors, which are metal and interlocking for a secure connection.

Is the CLLEKS20M compatible with all lasers?

It is specifically compatible with Cameo effect lasers that have screw-in interlocking 2-pin mini round plug connectors. It meets European safety regulations for laser classes 3b and 4.

Can the CLLEKS20M be locked to prevent unauthorized use?

Yes, it includes a locking switch with two keys. When switched to OFF, the interlock circuit is interrupted. Remove the keys to prevent activation by unauthorized persons.

What are the dimensions and weight of the CLLEKS20M?

The dimensions are 72 x 65 x 110 mm (W x H x D) and the weight including cable is 1.1 kg.

How should I clean the CLLEKS20M?

Clean the device using a dry cloth. Do not use liquids or allow moisture to enter the housing.

What safety precautions should be observed when installing the CLLEKS20M?

Follow all safety warnings: use stable mounts, ensure proper ventilation, avoid heat sources and water, and have repairs done only by qualified personnel. Disconnect power if damaged.

How do I dispose of the CLLEKS20M at the end of its life?

Do not dispose of as household waste. Follow local regulations for waste electrical and electronic equipment (WEEE) to promote recycling and avoid environmental harm.

USER MANUAL CLLEKS20M Cameo

Emergency Stop Switch with Key Control and 20 m Cable

SAFETY INFORMATION

1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed and secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observe the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment - in this case, observe the special instructions noted below. Do not expose this equipment to flammable materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in another way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.

FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:

1. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately. Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.

2. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.

3. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power adapter and the equipment connector.

4. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter with wet hands.

5. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of the equipment.

6. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.

7. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.

CAUTION:

To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an electrical shock.

The warning triangle with exclamation mark indicates important operating and maintenance instructions.

MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY

You can find our current warranty conditions and limitation of liability at: https://cdn-shop.adamhall.com/media/pdf/Manufacturers-Declarations-CAMEO_DE_EN_ES_FR.pdf

To request warranty service for a product, please contact Adam Hall GmbH, Adam-Hall-Str. 1, 61267 Neu Ans pach / Email [e-mail] / 49 (0) 6081 / 9419-0

PROPER DISPOSAL OF THIS PRODUCT

(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)

(Valid in the European Union and other European countries with waste separation)

This symbol on the product, or the documents accompanying the product, indicates that this appliance may not be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled waste disposal. Please dispose of this product separately from other waste and have it recycled to promote sustainable economic activity.

Black cable with red and black adjustment knob next to a yellow control box and metallic key (no text or symbols visible)

FEATURES

Emergency stop for laser

Large red push button switch with rotary release

With key lock to prevent unauthorised operation

Fixed 20 m cable

Interlocking metal mini round connectors

INTRODUCTION AND OPERATION

The CLLEKS20M emergency cut-off switch facilitates installation of an emergency cut-off system to enable remote switching off of the lasers of connected effect lasers in the event of a dangerous situation. Cameo effect lasers (laser class 3b and 4) can only be operated in a closed interlocking circuit. By pressing the emergency stop switch, a contact is opened and the circuit is thus interrupted. The Cameo LEKS 20 M has an impact resistant, highly visible yellow plastic housing, a red emergency stop push button switch with rotary release, a locking switch and a 20-metre fixed cable with metal 2-pin mini round screw connectors. Put the locking switch into the OFF position to interrupt the interlock circuit switch off the connected lasers, and into the ON position to activate. Two keys are included. To ensure that an effect laser is not operated by unauthorised persons, lock the switch and remove the associated keys. Lasers can only be activated when the lock switch is in the ON position and the emergency stop push button is unlocked (to unlock, turn in the direction of the arrow). The LEKS 20 M meets European safety regulations for lasers of class 3b and 4 and is compatible with Cameo lasers with screw-in interlocking 2-pin mini round plug connectors.

SPECIFICATIONS

Article number CLLEKS20M
Product type: Emergency cut-off switch unit for effect laser
Laser shutdown: Emergency stop push button, locking switch
Connection cable: 20 metres, hard-wired in the housing
Connection type: Screw-in 2-pin mini circular connector
Material: Plastic
Colour: Black/yellow, red emergency stop push button
Dimensions (W x H x D): 72 x 65 x 110 mm
Weight with cable: 1.1 kg
Additional features: 2 keys for locking switch included

Black and yellow industrial electrical switch with coiled cable, plus key and security key (no text or symbols visible)

FEATURES

Not-Aus für Laser