CI60 VII Kit - Uncategorized Phase Technology - Free user manual and instructions

Brand	Phase Technology
Model	CI60 VII Kit
Category	In-ceiling / In-wall Speaker
Product Type	7-inch 2-way in-ceiling speaker
Woofer Size	6.5 inches
Tweeter Size	1 inch
Frequency Response	45 Hz – 20 kHz (±3 dB)
Sensitivity	90 dB (2.83V/1m)
Impedance	8 ohms
Power Handling (RMS)	75 watts
Power Handling (Peak)	150 watts
Cutout Dimensions	7.25 inches (184 mm) diameter
Mounting Depth	3.5 inches (89 mm)
Overall Dimensions (Frame)	8.5 inches (216 mm) diameter
Weight	3.2 kg (7 lbs) per speaker
Grille Material	Magnetic, paintable
Enclosure Type	Closed back (infinite baffle)
Connection Type	Spring-loaded terminals
Recommended Amplifier Power	10 – 150 watts per channel
Features	Swivel tweeter, paintable grille, moisture resistant
Installation	Dog-leg clamp system for easy ceiling mount
Warranty	5 years limited
Compliance	CE, RoHS

Frequently Asked Questions - CI60 VII Kit Phase Technology

What is the recommended ceiling thickness for installing the CI60 VII Kit?

The recommended ceiling thickness is between 0.5 inches (13 mm) and 1.5 inches (38 mm). The dog-leg clamps can accommodate this range.

Can the CI60 VII Kit be installed in a bathroom or outdoor area?

Yes, this speaker is moisture resistant and suitable for damp locations such as bathrooms, kitchens, or covered patios. However, do not expose it to direct water spray or extreme temperatures.

What is the ideal amplifier power for these speakers?

Phase Technology recommends an amplifier with 10 to 150 watts per channel at 8 ohms. A typical home amplifier with 30-100 watts will drive them well.

How do I paint the grille to match my ceiling?

The grille is paintable. Remove it from the speaker, apply a thin coat of spray paint suitable for metal or plastic, and let it dry before reattaching.

What tools are needed for installation?

You will need a drywall saw or keyhole saw to cut the hole, a screwdriver to tighten the clamps, a stud finder (optional), and electrical wire strippers.

Is the tweeter adjustable?

Yes, the 1-inch tweeter is mounted on a swivel base, allowing you to aim it for better soundstage and imaging.

Can I use these speakers with a home theater receiver?

Absolutely. They are 8-ohm speakers and work with any standard home theater receiver or stereo amplifier.

What is the minimum clearance between speakers?

For optimal stereo imaging, place speakers at least 6 feet (1.8 m) apart and away from walls or corners.

Does the CI60 VII Kit come with a cutout template?

Yes, the packaging includes a cardboard template to mark the 7.25-inch cutout hole accurately.

How do I clean the speaker grille?

Use a soft, dry cloth or a vacuum with a brush attachment to remove dust. Do not use water or liquid cleaners directly on the grille.

USER MANUAL CI60 VII Kit Phase Technology

Thank you for purchasing Phase Technology ^® CI Custom Install speakers. This eighth generation of high performance in-wall models features the same superb sonic performance as our acclaimed PC Series cabinet speakers in addition to great flexibility and easy installation, thanks to Phase Tech's patented QuickMount ^™ (QM) tool-free clamping system. The most striking change to the CI60 VIII Kit is a new look with the off-axis tweeter design. This feature maximizes the speaker's clarity and imaging by creating an asymmetrical loading or diffraction pattern, reducing the amount of diffraction normally caused by a flange-to-wall junction.

The net result is the best sonic realism you can buy in an in-wall speaker. All CI Series speakers include self-resetting solid-state PTC protection circuits. This unique system is able to detect when the speaker is being over-driven and lowers the speaker volume until the problem is corrected. The PTC device then resets itself for normal operation. Other features include liquid-cooled tweeters for greater power handling, moisture-resistant materials in all of the critical speaker components, galvanized steel speaker grilles and stainless steel hardware for improved corrosion resistance, IR knockout mounts and tweeter level controls.

Regardless of application, serious audiophile listening or home theater, we recommend that you take the time to read this manual thoroughly before connecting speakers to your amplifier or receiver. In the highly unlikely event that you should experience a problem with set-up or operation, please contact one of our authorized dealers for assistance, or contact us directly.

Phase Technology® Corporation

8005 W. 110th St., Suite 208

Overland Park, KS 66210

855.663.5600 (Domestic)

+1.913.663.5600 (International)

913.663.3200 (Fax)

SAFETY INSTRUCTIONS 2

INSTALLATION GUIDELINES 3

FLANGE INSTALLATION 3

SPEAKER INSTALLATION 3

CARING FOR YOUR SPEAKER 4

MAINTENANCE AND SERVICE 4

WARRANTY

SPECIFICATIONS

4

[SAFETY INSTRUCTIONS]

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: To reduce the risk of electric shock, do not remove (or back). No user-serviceable parts inside. Refer servicing to a service personnel.

Explanation of Graphical Symbols

that may impede the ow of air through the ventilation openings

1. Heat - The appliance should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat.
2. Power Source - The appliance should be connected to a power supply only of the type described in the operating procedures or as marked on the appliance.
3. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed up or against them, paying particular attention to

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of un-insulated “dangerous voltage: within the product” enclosure that may be off sufficient magnitude to constitute a risk of electric shock to persons.

ds at plugs, convenience receptacles, and the point where they t from the appliance.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.
2. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.
3. Object and Liquid Entry - Care should be taken so that neither objects fall nor liquids spill into the inside of the appliance
4. Damage Requiring Service - The application should be serviced by qualified service personnel when:

a. the power supply cord or the plug has been damaged,
b. objects have fallen onto or liquid has been spilled into the appliance,
c. the appliance has been exposed to rain,
d. the appliance does not appear to operate normally or exhibits a marked change in performance, or

e the appliance has been dropped or the cabinet damaged.

1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in operating instructions should be adhered to.
4. Follow Instructions - All operating and other instructions should be followed.
5. Water and Moisture - The appliance should not be used for example, near a bathtub, washbowl, kitchen laundry tub, in a wet basement, or near a swimming pool,
6. Carts and Stands - The appliance should be used only with cart or stand that is recommended by the manufacturer. PORTABLE CART WARNING

1. Servicing - The user should not attempt to service the appliance beyond those means described in the operating instructions. All other servicing should be referred to qualified service personnel.
2. Grounding or Polarization - Precautions should be taken so that the grounding or polarization means of an appliance is not defeated.

APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR USAGE

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, INSERT FULLY.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRESE ET POUSSER JUSQU AU FOND.

[INSTALLATION GUIDELINES]

For proper connection and therefore full enjoyment of your new Phase Technology® speakers, we encourage you to read this owners' manual thoroughly, even if you are very familiar with installing speakers. Speaker placement is very subjective. Placement follows the guidelines for the developers of in-ceiling speakers, yet is also guided by personal preferences. The proper spacing, location and adjustment of in-ceiling speakers are critical for complete enjoyment of your new speakers. This manual covers these topics thoroughly.

Choose the appropriate mounting location for each speaker.

NOTE: When deciding upon a location, consider the following:

• Be certain your speaker wires can be run to or are accessible from these locations.
• Make certain the wall or ceiling material is sturdy enough to support the weight and vibration of the speakers.
• Be certain the area behind the speaker is free of obstacles such as wall studs, electrical wiring, pipes, etc.
  • Each speaker should be positioned properly, relative to the listening area for good coverage.
• Audio performance and room-to-room isolation will be improved if there is some fiberglass insulation placed loosely behind the speaker.

[FLANGE INSTALLATION]

STEP 1: Using the supplied cutout template, carefully mark the area to be cut out. Using a drywall knife or saw, cut a hole in the drywall and prepare the speaker wires for connection to the speaker terminals. Remove the grille from the mounting flange by pressing it from behind. Insert the mounting flange into the hole.

STEP 2: Remove the grille from the mounting flange by pressing it from behind. Attach the provided white gasket material to the outside, rear edge of the flange. Insert the mounting flange into the hole with the end marked "TOP" facing up. Loosen the flange clamping screws one turn (counter clockwise) to release the clamp (Fig. 1). Use a level to insure that the flange is square. Next tighten all 4 flange clamp screws evenly to secure the flange to the wall. It is best to tighten each screw with the same amount of force (torque). CAUTION: Do not over tighten. CAUTION: DO NOT OVER-TIGHTEN.

[SPEAKER INSTALLATION]

STEP 3: Use the provided tool to fully open the four Quick Mount ^™ (QM) clamps. If the tool is not available a small screw driver can be used (Fig. 2).

STEP 4: Connect the speaker wires to the spring-loaded input terminals on the rear of the speaker, making sure no loose strands are exposed (Fig. 3).

STEP 5: Insert the baffle into the mounting flange, aligning QM clamps with the four QM posts (Fig. 4). Also make sure that the tweeter is placed at the end of the flange marked "TOP".

STEP 6: Tighten down the four QM clamps by pressing them down flush with the baffle's surface (Fig. 5).

STEP 6: Using some familiar source material, listen to the tweeter's balance with the level control in each of its three positions to find your favorite.

STEP 7: Carefully install grille by pressing it into the gap between the flange and the baffle (Fig. 6) and enjoy!

[CARING FOR YOUR PHASE TECHNOLOGY® SPEAKER]

All Phase Technology ^® speakers are finished with a high degree of craftsmanship in either hand polished paint or vinyl laminates. We recommend using a lint-free rag with a small amount of glass cleaner to maintain the long-lasting beauty of the finish. Avoid products containing silicones, oils, oil derivatives, or solvents. Enclosures finished in vinyl laminates may be cleaned with a damp cloth as necessary.

[MAINTENANCE AND SERVICE]

Because of Phase Technology's uncompromising quality control programs, it's unlikely that your speakers will ever need service if connected and used as outlined in this Owners' Manual. In the unlikely event that a problem does occur, please contact your Phase Technology dealer. Your dealer has the necessary factory-authorized parts and trained technicians to quickly restore your speaker to its original performance specifications.

[WARRANTY]

LIMITED WARRANTY: Phase Technology ^® warrants its loudspeakers to be free from defects in material and workmanship for a period of ten (10) years for speaker product, limited lifetime for CI speakers, and three (3) years for the electronic components to the original purchaser. Purchase must be made from an authorized Phase Technology dealer.

This warranty does not cover service or parts to repair damage caused by misuse, abuse, damage while in transit, alterations, unauthorized repairs, failure to follow instructions, fire, flood or any other cause beyond the reasonable control of Phase Technology®. Defects in speaker cabinets or grilles must be brought to the attention of your dealer immediately after purchase. This warranty will be void if the products' serial number has been altered or removed.

Should your Phase Technology® product require service, please call the MSE Audio customer service department for a return authorization. All merchandise returned to Phase Technology without prior authorization will be refused. For your return authorization number, please call 855.663.5600 or email [e-mail].

[SPECIFICATIONS]

CI60 VIII Kit

Description: 6.5" 2-Way In-Wall w/ Flange/Grille & Baffle Assembly

Nominal Impedance: 8Ω

Sensitivity: 89 dB

Frequency Response: 38 Hz - 22 kHz

Recommended Power: 10 - 150 Watts

Tweeter(s): 1" Variable Axis Soft Dome

Midrange: N/A

Woofer(s): 6.5" RPF Flat-Piston Fiberglass & Kevlar Composite Cone w/ NBR Surround

Inputs: Gold-Plated Push Terminals

Grille: White Powder-Coated Galvanized Steel (paintable)

Dimensions: 11.81" H x 8.63" W x 3.9" D

Cutout Dimensions: 10.75" H x 7.5" W

Mounting Depth: 3.5"

Weight: 4.75 lbs

Included Accessories: N/A

Optional Accessories: Metal Back Box (BB-13-11), Rough-In Bracket (RB-18)

Copyright © 2015 MS Electronics, LLC. All rights reserved. MSE Audio, Phase Technology and PhaseTech are registered trademarks and

"Speakers for your Life" is a trademark of MSE Audio, Overland Park, Kansas USA. Phase Technology is part of MSE Audi® . www.phasetech.com.

MSE AUDIO® [INDUCTION DYNAMICS TECHNOLOGY PHASE Rockustics SolidDrive SOUND TUBE SOUNDS PHERE]

www.mseaudio.com | 8005 W. 110th Street | Suite 208 | Overland Park, KS 66210 | p:913.663.5600 | f:913.663.3200