IW200-II - Subwoofer Phase Technology - Free user manual and instructions
Find the device manual for free IW200-II Phase Technology in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-wall subwoofer |
| Brand | Phase Technology |
| Model | IW200-II |
| Driver Size | 8-inch long-throw woofer |
| Frequency Response | 30 Hz - 150 Hz |
| Amplifier Power | 200 Watts RMS built-in amplifier |
| Sensitivity | 89 dB (1W/1m) |
| Crossover Frequency | Adjustable, 40 Hz - 120 Hz |
| Dimensions (H x W x D) | 14.5 x 9.5 x 3.5 inches |
| Mounting Depth | 3.25 inches |
| Weight | 12.5 lbs |
| Power Source | AC 120V, 60Hz |
| Mounting Type | In-wall (bracket included) |
| Finish | White, paintable grille |
| Adjustments | Crossover frequency, phase switch, volume control |
| Maintenance | Wipe with a dry, soft cloth |
| Safety | Professional installation recommended |
| Spare Parts & Repairability | Not user-serviceable; contact authorized dealer |
| General Information | Designed for home theater and high-fidelity audio systems |
Frequently Asked Questions - IW200-II Phase Technology
How do I connect the IW200-II subwoofer to my receiver?
Use a subwoofer cable (RCA) from your receiver's subwoofer pre-out to the LINE IN on the IW200-II. Ensure the receiver's subwoofer output is enabled in the speaker setup menu.
What are the exact dimensions for in-wall installation?
The mounting depth is 3.25 inches and the overall dimensions are 14.5 x 9.5 x 3.5 inches. Cut a hole of 12.75 x 7.75 inches with 1/4-inch clearance for the mounting brackets.
Can I paint the grille to match my wall?
Yes, the grille is paintable. Remove the grille, apply a thin coat of spray paint designed for plastic or metal, and let it dry completely before reinstalling.
What is the recommended amplifier power for this subwoofer?
The IW200-II has a built-in 200-watt RMS amplifier, so it does not require an external amplifier. If you use it as a passive unit (optional), any amplifier with 20-200 watts RMS per channel at 8 ohms will work.
Why is there no sound coming from the subwoofer?
Check the power connection, ensure the receiver's subwoofer output is active, and verify the volume control on the subwoofer is turned up. Also, confirm the phase switch is not set to the opposite position that cancels bass.
Is the IW200-II wireless?
No, the IW200-II is a wired subwoofer. It requires a physical RCA cable from the receiver or a similar audio source.
What is the frequency response of this subwoofer?
The frequency response is 30 Hz to 150 Hz, which allows for deep bass and a smooth blend with your main speakers.
How do I clean the subwoofer and grille?
Use a dry, soft cloth to remove dust from the outer cabinet and grille. Avoid using liquids or abrasive cleaners that could damage the finish.
Can I use this subwoofer with a home theater receiver?
Yes, the IW200-II is ideal for home theater. Connect it to your receiver's subwoofer output and adjust the crossover to blend with your satellite speakers.
What should I do if the subwoofer hums or produces a buzz?
Check for ground loops by plugging all equipment into the same power strip. Ensure the subwoofer cable is not running alongside power cords. A high-quality shielded RCA cable often resolves humming issues.
User questions about IW200-II Phase Technology
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual IW200-II - Phase Technology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IW200-II by Phase Technology.
USER MANUAL IW200-II Phase Technology
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Phase Technology
Model : IW200-II
Category : Subwoofer