CR Touch - Uncategorized CREALITY - Free user manual and instructions
Find the device manual for free CR Touch CREALITY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Auto-Leveling Sensor for 3D Printers |
| Brand | Creality |
| Model | CR Touch |
| Compatibility | Creality CR-10 series, Ender 3 series, Ender 5 series, and other printers with BLTouch support |
| Technology | Inductive proximity sensing with metal pin |
| Sensing Distance | 5 mm (typical) |
| Pin Material | Stainless steel |
| Cable Length | 1.5 m (approx.) |
| Connector | Dupont 5-pin |
| Operating Voltage | 5 V (from control board) |
| Current Consumption | ~10 mA |
| Weight | 15 g |
| Dimensions (L x W x H) | 20 mm x 15 mm x 10 mm |
| Environmental Operating Temperature | 0-40°C |
| Functions | Automatic bed leveling, uneven bed compensation |
| Installation Requirements | Firmware support (Marlin, etc.), appropriate mounting bracket |
| Maintenance | Keep pin and sensor clean from debris; wipe with dry cloth |
| Safety Notes | Ensure correct wiring to prevent short circuit; disconnect power before installation |
| Spare Parts | Replacement pins, cables, mounting screws |
| User Manual | Available as PDF download from Creality official website or notice-facile.com |
Frequently Asked Questions - CR Touch CREALITY
What is the Creality CR Touch?
The Creality CR Touch is an auto-leveling sensor for 3D printers that uses a metal pin to probe the bed at multiple points, compensating for uneven surfaces to improve first layer adhesion.
Which 3D printers are compatible with the CR Touch?
It is compatible with many Creality printers including Ender 3 series, CR-10 series, and Ender 5 series, as well as other printers that support a BLTouch-style sensor.
How do I install the CR Touch?
Mount the sensor using the supplied bracket, connect the 5-pin Dupont cable to the mainboard's BLTouch port, and enable BLTouch support in your printer's firmware.
Do I need to update the firmware after installing CR Touch?
Yes, you need firmware with auto-leveling support (e.g., Marlin with BLTouch enabled). Many pre-compiled firmwares are available for common Creality printers.
How does the CR Touch work?
The sensor extends a metal pin to touch the bed surface and measures the distance using an inductive sensor. It probes multiple points to create a mesh map for Z-axis compensation.
How do I set the Z offset after installation?
After bed leveling, use the printer's menu to adjust Z offset (e.g., Probe Z Offset) until the nozzle is at the correct height. You can also use G-code commands like M851.
Why is the CR Touch not probing?
Check that the cable is securely connected, the firmware has BLTouch enabled, and the pin moves freely. If the pin is stuck, gently clean it with alcohol.
What is the pin made of?
The pin is made of stainless steel, which is durable and resistant to corrosion.
Can I use the CR Touch on non-Creality printers?
Yes, as long as the printer's control board has a 5V BLTouch-compatible port and the firmware supports auto-leveling. An adapter or wiring modification may be needed.
How do I clean and maintain the CR Touch?
Gently wipe the sensor and pin with a dry, lint-free cloth. Avoid using lubricants or solvents, as they can damage the internal mechanism.
User questions about CR Touch CREALITY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual CR Touch - CREALITY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CR Touch by CREALITY.
USER MANUAL CR Touch CREALITY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CREALITY
Model : CR Touch
Category : Uncategorized