ZR9036 - Light Emos - Free user manual and instructions

Product Type	LED panel accessory frame
Model	ZR9036
Brand	Emos
Compatible Panel Models	ZR9034, ZR9035, ZR9036
Dimensions (L × W)	465 × 554 mm
Weight	Approx. 0.5 kg
Material	Aluminum profiles with plastic plugs
Color	White (typical)
Contents	2 profiles (A & B), 2 ceiling fittings, 2 wall plugs A, 2 wall plugs B, hex socket screw, M4x5 self-tapping screw, M4x3 self-tapping screw, M4x25 self-tapping screw, wall plug I
Installation Type	Ceiling mounted
Drilling Required	Yes, 5 mm diameter holes
Mounting Hardware Included	Yes (screws and wall plugs)
Assembly Difficulty	Easy (step-by-step instructions)
Maintenance	Clean with dry cloth; keep away from moisture
Safety Warning	Ensure secure fastening to avoid falling
Repairability	Spare parts available from manufacturer (profiles and screws)
Environmental Compliance	RoHS, CE marked
Warranty	Standard 2 years (check local regulations)

Frequently Asked Questions - ZR9036 Emos

What is included in the ZR9036 frame kit?

The kit includes two profiles (A and B), ceiling fittings, wall plugs, and various screws (hex socket, M4x5, M4x3, M4x25). Refer to the manual for a complete list.

Which LED panels are compatible with this frame?

The frame is designed for Emos LED panel models ZR9034, ZR9035, and ZR9036. Check the panel dimensions (465 × 554 mm for ZR9036) before purchase.

How do I install the frame?

1. Assemble profiles A and B as shown in figure 2. 2. Mark and drill 5 mm holes at marked positions. 3. Insert wall plugs. 4. Fasten frame to ceiling with supplied screws. 5. Remove profile B on one side, insert the LED panel, then replace profile B.

What tools are required for installation?

You will need a drill with a 5 mm bit, a screwdriver (likely Phillips or hex), and optionally a level to ensure the frame is straight.

Can the frame be used on a wall instead of a ceiling?

The frame is designed for ceiling mounting. Wall mounting is not recommended as the profiles may not provide adequate support for side installation.

What is the weight of the frame?

The frame weighs approximately 0.5 kg. The exact weight may vary slightly depending on the included hardware.

Is the frame adjustable for different panel sizes?

No, the frame is fixed size. It only fits panels with the exact dimensions of 465 × 554 mm (for ZR9036). Other models have different dimensions.

How do I clean the frame?

Use a soft dry cloth to remove dust. Avoid abrasive cleaners or liquids that could damage the finish.

What safety precautions should I take during installation?

Ensure the ceiling can support the weight. Use appropriate wall plugs for the ceiling material. Securely fasten all screws to prevent the frame from falling.

Where can I find spare parts or replacement screws?

Contact EMOS customer service or visit the official website. Spare parts such as profiles and screws are available upon request.

USER MANUAL ZR9036 Emos

ZR9034, ZR9035, ZR9036

GB LED panel	accessory – frame
CZ	Příslušenství LED panelů – rámeček
SK Príslušenstvo	LED panelov – rámik
PL	Wyposażenie do paneli LED – ramka
HU	LED-panel tartozékok – keret
SI	Pribor LED panelov – okvir
RS|HR|BA|ME	Dodatna oprema za LED panel – okvir
DE	Zubehör für LED-Panels – Rahmen
UA Компоненти світлодіодної панелі – рамка
RO|MD	Accesorii panouri LED – ramă
LT	LED skydelio priedai – rémas
LV	LED paneļa piederums – ietvars
EE	LED-paneeli lisatarvik – raam
BG	Принадлежност за светодиоден панел – Рамка

www.emos.eu

GB | LED panel accessory – frame

Contents:

A - Profile A
B - Profile B
C - Ceiling fitting
D - Wall plug A
E - Wall plug B
E - Hex socket screw
G - M4x5 self-tanning screw
6 - M4×3 self-tapping screw H - M4×25 self-tapping screw
I - Wall plug

Instructions for assembly

1. Assemble the individual parts of the frame according to the drawing.
2. Maintain the order of profiles A and B in accordance with figure 2.
3. Mark positions for drilling holes and drill holes with diameter of 5 mm at these spots.
4. Insert wall plugs into the holes.
5. Fasten the frame to the ceiling using the supplied screws.
6. Dismount profile B on one side, insert the panel into the frame, then replace the profile.
7. Assembly is complete.

EMOS spol. s r.o. declares that the LED Panel Accessory is in compliance with the essential requirements and other relevant provisions of Directive. The device can be freely operated in the EU. The Declaration of Conformity can be found at http://www.emos.eu/download.

Collection of six different types of electrical connectors and tools, including a pen, screw, bracket, and pin (no text or symbols present)

2 × 2 × 4 × 4 × 4 × 8 × 4 × 4 × 4 ×

1. 

2. 

	L × W (mm)
ZR9034	465 × 554
ZR9035	1 065 × 254
ZR9036	465 × 554

1. 

2. 

6.7.

Technical line drawing of two mechanical components with arrows indicating assembly or movement (no text or symbols)

TIP: ZR9034, ZR9035, ZR9036

DATUM IZROČITVE BLAGA:

Servis: EMOS SI, d.o.o., Rimska cesta 92, 3311 Šempeter v Savinjski dolini, Slovenija

tel: [phone]

e-mail: [e-mail]