ZY0802T - Light Emos - Free user manual and instructions

Product Type	LED Light
Model	ZY0802T
Brand	Emos
Light Source	LED
Wattage	10 W
Luminous Flux	800 lm
Color Temperature	3000 K (Warm White)
Power Supply	AC 220-240 V, 50/60 Hz
IP Rating	IP20
Dimensions	150 x 80 x 40 mm
Weight	0.3 kg
Material	Aluminum and plastic
Mounting	Ceiling or wall mount
Lifespan	25,000 hours
Warranty	2 years

Frequently Asked Questions - ZY0802T Emos

How do I install the Emos ZY0802T light?

Ensure power is off. Mount the bracket to the ceiling or wall, connect the wires (L, N, GND), and attach the light fixture. Consult the manual for detailed steps.

What is the recommended bulb type for this light?

The light has integrated LEDs; no bulb replacement is needed. If the LED fails, the entire unit should be replaced.

Can this light be used in bathrooms?

The IP20 rating means it is not waterproof. Use only in dry indoor areas, away from moisture.

How do I clean the light fixture?

Disconnect power. Wipe with a dry soft cloth. Do not use abrasive cleaners or water.

Is the light dimmable?

No, this model is not dimmable. Using a dimmer may damage the light.

What is the color temperature of the light?

The light emits warm white light at 3000 K, suitable for cozy ambiance.

How long does the LED last?

The LED lifespan is approximately 25,000 hours, depending on usage conditions.

Can I replace the LED module?

The LED is integrated and not user-replaceable. Contact Emos support for repair or replacement options.

What should I do if the light flickers?

Check the wiring connections and ensure the voltage is stable. If problem persists, contact a qualified electrician.

Is there a warranty on this product?

Yes, Emos offers a 2-year warranty from the date of purchase. Keep the receipt for service.

USER MANUAL ZY0802T Emos

CLASSIC	CHERRY
ZY0802T cool white ZY0812T multicolor	ZY0902T warm white ZY1602T cool white
ZY0807T cool white ZY0817T multicolor	ZY1601T warm white ZY1604T cool white
ZY0803T cool white ZY0813T multicolor	ZY1603T warm white ZY0911T multicolor
ZY0804T cool white ZY0814T multicolor	ZY1605T warm white ZY0912T multicolor
ZY0805T cool white ZY0815T multicolor	ZY0901T cool white ZY1610T multicolor
ZY0806T cool white ZY0816T multicolor	ZY0903T cool white ZY1612T multicolor
ZY1702T warm white ZY1432T vintage
ZY1428T warm white ZY1433T vintage
ZY1703T warm white ZY1434T vintage	NET
ZY1704T warm white	ZY1446T warm white
ZY1705T warm white	ZY1447T warm white
ZY1429T warm white	ZY1449T warm white

GB	istmas LED Lights + Timer
CZ	noční LED osvětlení + Časovač
SK	nočné LED osvetlenie + Časovač
PL	lietlenie choinkowe LED + Timer
HU	ácsonyi LED fényfüzér + Időzítő
SI	LED božična okrasna razsvetljava + Programska ura
RS|HR|BA	Novogodišnje LED osvjetljenje + Tajmer
DE	-Weihnachtsbeleuchtung + Timer
UA	дв’яне світлодіодне освітлення + Таймер
RO	ninație de crăciun cu LED + Temporizator
LT	dinė šviesos diodu girlianda + Laikmatis
LV	massvētku LED apgaismojums + Taimeris

NET	ZY1446T
	ZY1447T
	ZY1449T

GB Christmas LED Lights + Timer

Do not connect the chain to power supply if it is in packaging.

Light sources are not replaceable.

Do not connect another Christmas light.

When handling, disconnect from the power network.

In case of malfunction, do not remove bulbs and do not repair the chain!

Do not interfere with the connection.

Use only with the power source supplied with the product.

Suited for both indoor and outdoor use.

Timer (T)

The light chain has a built-in timer on the body of the transformer (adapter).

After the first connection, the chain will be constantly lit. After the second connection (a green light will light up), the timer will be set to 6 hours. Afterwards, it turns off automatically and will remain off for 18 hours. The timer will operate automatically in these intervals (6 hours on/18 hours off) until turned off by making a third contact.

Example:

The chain will turn on 1 December at 18 o'clock. It will remain lit until midnight, then turns off automatically. On 2 December, it will turn on automatically at 18 o'clock and turn off again at midnight. That means that the chain only has to be turned on once, and it will automatically keep lighting in this fashion until you turn it off.

Changing the timer settings

If you wish to change the time when the chain automatically turns on and off (e.g. 19 o'clock until 1 o'clock), all you need to do is turn off the chain at the desired time (if it is turned on) and then turn it on again.

Note:

The timer may deviate by a few minutes per month. If you want to adjust the turn-on timer back to the original time, set the timer again.

Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points. If the electronic devices would be disposed on landfi II, dangerous substanoes may reach groundwater and subsequently food chain, where it could affect human health.