PARTYCON BOOST - Loudspeaker SENCOR - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Sencor
Model	PARTYCON BOOST
Dimensions	Approx. 28 x 20 x 18 cm (11 x 7.9 x 7.1 in)
Weight	Approx. 2.2 kg (4.85 lbs)
Power Supply	Built-in rechargeable Li-ion battery, DC 5V (USB-C charging)
Battery Life	Up to 8 hours at 50% volume
Bluetooth Version	Bluetooth 5.0
Wireless Range	Up to 10 meters (33 ft)
Output Power (RMS)	20 W (2 x 10 W)
Frequency Response	60 Hz - 20 kHz
Speaker Drivers	2 x 5.25" woofer, 2 x 1" tweeter
Water Resistance	IPX4 (splash-proof)
Audio Inputs	Bluetooth, AUX (3.5 mm), USB-A (for music playback)
Microphone Input	6.3 mm (1/4") for karaoke
Radio	FM tuner with automatic scan
Lighting Effects	Multi-color LED party lights with various modes
Controls	Touch buttons on top: power, mode, volume, play/pause, lights, EQ
Special Features	Party Boost button for enhanced bass
Maintenance	Wipe with a soft dry cloth; avoid water ingress
Safety	Do not disassemble; avoid extreme temperatures; charge only with provided cable
Spare Parts / Repairability	Contact Sencor service center for battery or driver replacement

Frequently Asked Questions - PARTYCON BOOST SENCOR

How do I pair my phone with the Sencor PARTYCON BOOST?

Ensure the speaker is turned on and in Bluetooth mode (press the mode button until Bluetooth is selected). Enable Bluetooth on your phone, search for devices, and select "PARTYCON BOOST". If prompted, enter PIN 0000.

Why is my speaker not charging?

Check that the USB-C cable is securely connected to both the speaker and a power source (5V/2A adapter). Try a different cable or adapter. If the speaker does not charge, the battery may be defective; contact Sencor support.

Can I use the speaker while charging?

Yes, you can play music while charging, but the battery may charge slower. For optimal battery life, avoid fully depleting the battery before recharging.

How do I reset the speaker to factory settings?

Turn off the speaker. Then press and hold the "Mode" and "Volume +" buttons simultaneously for about 5 seconds until the LED flashes. The speaker will power off again. Turn it back on; settings are restored.

What is the Party Boost feature?

Party Boost is a dedicated button that emphasizes low frequencies (bass) for a more powerful sound during parties. Press the button to activate; press again to deactivate.

How can I connect a microphone?

Insert a 6.3 mm (1/4 inch) microphone plug into the MIC input jack on the rear of the speaker. Adjust the microphone volume using the dedicated knob (if available) or via the speaker's menu.

Is the speaker waterproof?

The speaker has an IPX4 rating, meaning it is splash-proof from any direction. It can withstand light rain or sweat, but should not be submerged in water.

Can I play music from a USB drive?

Yes, insert a USB drive (FAT32 format) into the USB-A port. The speaker will automatically play MP3 files from the drive. Use the controls to skip tracks.

How do I adjust the lighting effects?

Press the "Lights" button (marked with a bulb icon) to cycle through modes: solid, pulse, beat-sync, and off. Hold the button for 2 seconds to change color.

What should I do if the audio distorts at high volume?

Reduce the volume on both the speaker and your source device. Distortion at high levels is normal for any speaker. If persistent, check if the Party Boost is activated; it may cause clipping.

USER MANUAL PARTYCON BOOST SENCOR

Exterior view of a modern electric heater with mesh grille and two circular cutouts (no text or symbols visible)

EN User Manual Bluetooth Speaker PARTYCON BOOST