SKS 5035VT - Kitchen scale SENCOR - Free user manual and instructions

Product Type	Kitchen Scale
Brand	Sencor
Model	SKS 5035VT
Weight Capacity	5 kg / 11 lb
Graduation	1 g / 0.1 oz
Units of Measurement	g, kg, lb, oz, ml, fl.oz
Display Type	LCD, backlit
Power Source	2 x CR2032 batteries (included)
Auto-Off	Automatic shut-off after 2 minutes of inactivity
Tare Function	Yes, with manual tare button
Zero Function	Yes, automatic zero at power-on
Overload Indication	"O-Ld" warning on display
Low Battery Indication	"Lo" symbol on display
Material	Stainless steel platform, plastic body
Dimensions (W x D x H)	20 x 15 x 2 cm
Net Weight	240 g
Cleaning Instructions	Wipe with a damp cloth; do not immerse in water
Safety Warnings	Keep away from water and heat sources; use on a flat, stable surface
Accessories Included	2 x CR2032 batteries, user manual
Warranty	2 years (check local terms)

Frequently Asked Questions - SKS 5035VT SENCOR

How do I change the batteries?

Open the battery compartment on the underside, insert two CR2032 batteries with the correct polarity, and close the cover.

Why does the display show 'O-Ld'?

This indicates overload. Remove the excess weight immediately to avoid damaging the scale. The maximum capacity is 5 kg.

How do I switch between units?

Press the UNIT button repeatedly to cycle through g, kg, lb, oz, ml, and fl.oz.

Can I measure liquids in milliliters?

Yes, select the ml function. Place a container on the scale, tare it, then add liquid. The reading assumes water density.

What does the 'Lo' symbol mean?

It means the batteries are low. Replace them with two new CR2032 batteries as soon as possible.

How do I use the tare function?

Place an empty container on the scale, then press the TARE button. The display resets to zero, allowing you to weigh ingredients in the container.

Why does the scale auto-off so quickly?

The scale has an auto-off feature to save battery. It turns off after 2 minutes of inactivity. This cannot be disabled.

Is the scale waterproof?

No, the scale is not waterproof. Do not immerse it in water or any liquid. Clean with a damp cloth only.

How do I calibrate the scale?

The scale is calibrated at the factory. If you suspect inaccuracy, check the batteries first. There is no user calibration; contact Sencor support if needed.

What is the maximum weight I can measure?

The maximum capacity is 5 kg (11 lb). Exceeding this may damage the scale and cause an 'O-Ld' error.

USER MANUAL SKS 5035VT SENCOR

SENCOR®

SKS 5030WH / SKS 5031GR / SKS 5032BL

SKS 5033OR / SKS 5034RD / SKS 5035VT

SKS 5036YL / SKS 5037TQ / SKS 5038RS