VX1508 - Speaker Hartke - Free user manual and instructions
Find the device manual for free VX1508 Hartke in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Speaker Cabinet |
| Brand | Hartke |
| Model | VX1508 |
| Driver | 15-inch Hartke Aluminum Cone Woofer |
| Impedance | 8 ohms |
| Power Handling (RMS) | 150 Watts |
| Power Handling (Peak) | 300 Watts |
| Frequency Response | 40 Hz - 5 kHz |
| Sensitivity | 98 dB SPL @ 1W/1m |
| Input Connectors | 1/4" TS Jack and Speakon NL4 |
| Output Connectors | Speakon NL4 (parallel) |
| Construction | Plywood with Black Carpet Covering |
| Grill | Steel Mesh with Black Coating |
| Port | Tuned Bass Reflex |
| Handles | One Top-Mounted Handle |
| Feet | Rubber Feet |
| Dimensions (H x W x D) | 610 mm x 510 mm x 460 mm |
| Weight | 19.5 kg (43 lbs) |
| Warranty | 2 Years Limited |
Frequently Asked Questions - VX1508 Hartke
What cables do I need to connect the VX1508 to my amp?
Use a Speakon or 1/4" TS speaker cable. Ensure the amp impedance matches the cabinet's 8-ohm load.
What is the power rating of the VX1508?
The VX1508 handles 150W RMS and 300W peak. Match with an amp delivering similar power for best performance.
Can I use the VX1508 with a 4-ohm amp?
No, the VX1508 is 8 ohms. Connecting to a 4-ohm amp may cause mismatch or damage. Check your amp's minimum impedance.
Can I daisy-chain multiple VX1508 cabinets?
Yes, use the Speakon output to link cabinets in parallel. Total impedance halves with each added 8-ohm cab: two cabs = 4 ohms, three = 2.67 ohms. Ensure your amp can handle the total load.
How do I clean the VX1508 cabinet?
Wipe the exterior with a dry, soft cloth. Avoid water, solvents, or abrasive cleaners. Do not expose the speaker to moisture.
What is the warranty on the VX1508?
Hartke offers a 2-year limited warranty covering defects in materials and workmanship. Register your product for support.
What type of amplifier works best with the VX1508?
Any bass amp head rated for 8-ohm load and 150-300W output. Hartke amps are ideal, but others work as long as impedance matches.
How should I position the VX1508 for optimal sound?
Place the cabinet on the floor (coupling) for full bass response. Keep it away from walls to avoid boomyness. Angle if needed for monitor use.
Can I store the VX1508 in a damp or hot environment?
Store in a dry, cool place. Avoid extreme temperatures and humidity to prevent damage to the speaker cone and cabinet.
What should I do if there is no sound from the VX1508?
Check cable connections, amp power, and impedance match. Test the speaker with another amp or cable. If still no sound, contact Hartke support.
User questions about VX1508 Hartke
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual VX1508 - Hartke and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VX1508 by Hartke.
