B-Shine ICE - Epilator Beautifly - Free user manual and instructions

Product Type	IPL Hair Removal & Skin Rejuvenation Device
Brand	Beautifly
Model	B-Shine ICE
Technology	Intense Pulsed Light (IPL)
Wavelength	550-1100 nm
Light Window Size	4 cm² (with 1 cm² and 2 cm² overlays)
Total Flashes	500,000
Energy Levels	5 adjustable levels
Working Modes	6 modes: HR, HR+, SR, SR+, AC, AC+
Ice Cooling Function	Yes, integrated
Skin Tone Sensor	Automatic skin tone detection and energy recommendation
Flash Modes	Manual and automatic (glide mode)
Touch Control Panel	Yes
Power Supply	AC/DC adapter
Adapter Input	100-240 V, 50/60 Hz
Adapter Output	12 V DC, 6 A, 72 W
Dimensions (W x D x H)	200 x 170.6 x 87.5 mm
Weight	0.5 kg
Included Accessories	Adapter, protective goggles, razor, cosmetic bag, 2 overlays (1 cm², 2 cm²), user manual
Safety Features	Skin tone sensor, contact detection, overheat protection, automatic shut-off
Maintenance	Clean light window with damp cloth after each use
Warranty	24 months
Certification	CE compliant

Frequently Asked Questions - B-Shine ICE Beautifly

How does the B-Shine ICE remove hair?

The device uses Intense Pulsed Light (IPL) technology. Light energy is absorbed by melanin in the hair, heating the follicle and causing it to enter a dormant phase. Hair then falls out naturally over 1-2 weeks. For best results, use weekly for 8 weeks initially.

Can I use the device on all skin and hair types?

The device is suitable for skin tones from white to light brown. It works best on dark hair (brown, dark brown, black). Do not use on white, gray, red, or very light blonde hair. Refer to the skin color chart in the manual for guidance. Very dark skin may not be suitable.

What is the Ice Cooling function for?

The Ice Cooling function (HR+, SR+, AC+ modes) cools the skin during treatment for enhanced comfort. It helps reduce redness and irritation, making the treatment more pleasant, especially on sensitive areas.

How do I select the right energy level?

Start at level 1 for the first use. The device can automatically recommend a level based on skin tone. Gradually increase the level if you feel no discomfort. The highest tolerable level without pain gives the best results.

Can I use the device on a tattoo or mole?

No. Avoid areas with tattoos, dark spots, birthmarks, or moles. These can absorb too much light and cause burns, blisters, or discoloration. Do not use on moles or warts.

How often should I do treatments?

For hair removal: weeks 1-4, use twice a week; weeks 5-8, once every 1-2 weeks; after 8 weeks, once every 4-6 weeks for maintenance. For acne and skin rejuvenation, follow the specific schedules in the manual.

Is the device safe for acne treatment?

Yes, the device has an acne mode (AC and AC+). IPL light kills acne-causing bacteria and reduces inflammation. Do not combine with antibiotic therapy. Wait a few weeks after finishing antibiotics before using.

Can pregnant or breastfeeding women use the device?

No. Do not use if you are pregnant, trying to become pregnant, or breastfeeding. Hormonal changes can increase skin sensitivity and risk of damage. The device has not been tested for safety during these conditions.

How do I clean and maintain the device?

After each use, turn off and unplug. Clean the light window with a damp cotton swab or soft cloth to remove hair and sebum. Do not use abrasive cleaners or submerge in water. Store in a cool, dry place.

What should I do if the skin becomes red after treatment?

Mild redness is normal and usually subsides within a few hours. Apply a moisturizer or aloe vera gel. Avoid sun exposure and use sunscreen. If redness persists or blisters occur, stop using and consult a doctor.

USER MANUAL B-Shine ICE Beautifly

Multifunctional cosmetic laser

White hairless facial recognition device with digital display and two separate oval cutouts (no visible text or symbols)

Instrukcja obsługi

User manual

/beautifully.eu

/beautifulyeu

@beautifly.eu

beautifly.eu

B-Shine Ice

series

3 FUNKCJE W 1 URZĄDZENIU

(DEPILACJA, LECZENIE TRĄDZIKU, REWITALIZACJA SKÓRY)

6 TRYBÓW PRACY	DOTYKOWY PANEL STEROWANIA
FUNKCJA ICE COOLING	5 POZIOMÓW		500 000 IMPULSÓW
NAKŁADKI DO RÓŻNYCH CZĘŚCI CIAŁA		ROZMIAR OKIENKA 4CM2
KOSMETYCZKA W ZESTAWIE		SENSOR KOLORU SKÓRY

TRYB AUTOMATYCZNYCH IMPULSÓW

White handheld device with a circular display and orange base, no visible text or symbols

White handheld hair dryer with red liquid at the base, no visible text or symbols

Opis produktu

White oval-shaped object with a rectangular cutout and a blue circular badge showing the number 15 (no text or symbols on the object itself)

White oval-shaped object with a small square cutout and a blue circular badge showing the number 14 (no text or symbols on the object itself)

Procedura działania

Close-up illustration of a hair follicle with blood vessels (no text or symbols)

Pierwszy etap

Illustration of a medical procedure showing blood vessels and tissue layers (no text or symbols)

Drugi etap

Cross-sectional illustration of a layered material with visible cracks and texture (no text or symbols)

Trzeci etap

Usuwanie włosów

Zastosowanie

(EPILATION, ACNE TREATMENT, SKIN REVITALIZATION)

6 WORKING MODES	TOUCH CONTROL PANEL
ICE COOLING FUNCTION	5 LEVELS	500,000 PULSES
OVERLAYS FOR DIFFERENT PARTS OF THE BODY		WINDOW SIZE 4CM 2
COSMETIC BAG INCLUDED	SKIN COLOR SENSOR

AUTOMATIC PULSE MODE

Technical data B-Shine Ice
Type of light	Intense pulsed light (IPL)
Adapter:	AC: 100-240V, 50/60Hz+/3HzDC: 12V | 6A | 72W
Product size:	200×170.6×87.5mm
Product weight:	0.5kg
Light area:	4cm2 / 2cm2 / 1cm2
Wavelength:	600nm
Working environment:	5-40°C humidity ≤75%
Storage environment:	0-60°C humidity ≤75%
Included:	Device, adapter, manual, googles, razor,cosmetic bag, 2 overlays for differentparts of the body

The B-Shine Ice cosmetic laser uses Intense Pulsed Light (IPL)

technology, which is one of the most effective ways to quickly and easily remove unwanted hair, revitalize the skin and treat acne. Compared to the regular method of laser hair removal, it is safer and more reliable, and the effects last longer. Hair removal with a light photon requires the appropriate wavelength of pulsed. B-Shine Ice has a light wavelength of 550nm-1100nm. The melanin in the hair absorbs high energy heat and the hair follicles naturally shrink and fall off. Using the B-Shine Ice with Photon technology takes about 8 weeks to remove hair. After the first two treatments, you will notice a reduction in hair. After each epilation treatment, the thickness of the hair is reduced. The device can be used on most parts of the body.

Two white handheld hairless devices with digital display and pink base, shown from different angles (no text or symbols visible)

Product structure

1. Light outlet
2. Ice cool area
3. Sensor (skin tone & contact detection)
4. Air-inlet
5. Air-outlet
6. LCD display
7. Mode button
8. Power button
9. Indicating light
10. Angle adjustment
11. Emission button
12. Holder
13. Power interface
14. 1 cm² filter
15. 2 cm² filter

White oval-shaped object with a rectangular cutout and a blue circular badge showing the number 15 (no text or symbols on the object itself)

White oval-shaped object with a square cutout and a blue circular badge showing the number 14 (no text or symbols on the object itself)

Product principle

The B-Shine Ice hair removal device has integrated filters that protect the skin against harmful radiation and burn during the depilation procedure. Hair growth rate varies, depending on age, metabolism and other factors. Hair growth is usually divided into three stages.

1. The growing phase actively grows along with onions. At this stage, the concentration of melanin is the highest. Melanin determines the formation of hair color. Melanin concentration is also a decisive factor in the effectiveness of intensive pulsation light technology. Only hair in the growing phase will react to the liquid depilation process.

2. Phase degeneration with hair growth and rooting onion.

3. A phase built on the hair and fall off onions and fall out. Onion is in sleep until the next hair growth cycle.

Close-up illustration of a medical or dental procedure showing a white object above a dark liquid, with no visible text or symbols.

The first stage

Illustration of a human skin with blood vessels and hair follicles (no text or symbols)

The second stage

Cross-sectional illustration of a layered material with visible cracks and texture (no text or symbols)

The third stage

In the first stage of depilation, the B-SHINE ICE device uses energy energy to act directly on the hair bulbs below the skin. Melanin in the middle and my hair bulbs absorb the impulse energy of light emitted by the device. The darker the color of the hair, the more light energy is absorbed, and this process stimulates the onion to enter the dormant phase.

In the second stage, during the depilation period, the hair will naturally fall out, and regeneration will be inhibited, which may take 1-2 weeks. Only hair in the growth phase will be removed. To effectively remove unwanted hair, repeat the depilation process once a week for a period of two months.

Display description

Service life of device: While turn on device or 10 seconds without operation, the device will show the remaining service life. Operation times calculation: light emission times will show on LCD display. After 10 seconds without operation, the device will show the remaining service life.

Working mode (6 modes):

1. HR: normal hair removal,
2. (HR+): ice cool hair removal,
3. SR: Normal skin rejuvenation,
4. (SR+): Ice cool skin rejuvenation,
5. AC: Normal acne
6. (AC+): Ice cool acne

Energy adjustment:

Total 5 levels, the energy intensity is changed with different level.

Flash mode:

When the display shows 4, means manual light mode.

When it shows 44, means auto light mode.

Countdown display when shut down:

Long press the power button to shut down, the screen will display a countdown of 30 seconds. During this period, the fan is still running normally to dissipate heat. After the countdown is completed, the instrument is completely turned off.

Contorl panel specification

Power button:

1. Press the power button for 2 seconds to start the device. Press the power button for 2 seconds to turn off the device. The internal cooling system will keep running for 30 seconds to maintain the device after shut down.
2. After turn on, the instrument will automatically select the appropriate energy level according to the skin color, when the light outlet first contact the skin. Or touch the power button to adjust the energy levels manual (level 1-5), and select the appropriate level to use. It is recommended to start from the low level (level 1), the level can be gradually increased, if the skin is acceptable.

Mode button:

1. Long press M button, turn on or turn off the ice cool function.
2. Short press M button, switch function under HR (hair removal mode), SR (skin rejuvenation mode) and AC (acne mode).

Emission button:

1. Manual light emission: the display shows heckmark , ensure that the light outlet touch the skin( the indicating light on). Press the emission button one time, the light flash once.
2. Auto light emission: press and hold the emission button for 2 seconds, LCD screen shows 44, ensure the light outlet fitting the skin well (indicating light on) that the device will emit light automatically.

Contraindications

The device is not intended for children under 15 years of age. Young people aged 15-18 can use the device with permission and / or under the supervision of parents or guardians.
- Do not use if the skin in the area to be treated is tanned or burned. Using the device on tanned or burned skin can cause temporary or even permanent discoloration of the skin.
- Do not use if you are pregnant, try to get pregnant, you suspect you may be pregnant or you are breastfeeding. The B-Shine Ice device has not been tested for this occasion, therefore, do not use it in these cases. Hormonal changes occurring during pregnancy or breastfeeding may increase the risk of skin damage or skin sensitivity.
- Do not use the device if you have a disease such as epilepsy or or light-induced seizures or migraine. Energy flashes can cause severe headaches and migraines.

- Do not use on areas covered with tattoos, dark brown or black places (such as dark freckles, birthmarks, or warts). Tattoos or dark spots can absorb too a lot of light energy that can cause swelling of the skin, temporary or permanent blisters, discoloration or whitening of the skin.

Do not use the device if you have a tendency to form keloids.

- Do not use on the scalp, ears, neck, nipples or on mucous membranes (lips vulva smaller, around the vagina and anus). At those points of the bikini zone where the skin has stronger pigmentation, use a lower level of light intensity. Use in these places may cause swelling of the skin, blisters or temporary discoloration or skin bleaching.

- Do not use if any active inflammation of the skin occurs in the treatment area, including acne, psoriasis, pimple, burns, herpes, abrasions or epidermis rash. These factors can make the skin more sensitive to light and make the procedure work unpleasant or cause swelling, blisters or infections on the skin. If the skin is enough healed, before using the device, consult a doctor.

- Do not use the device if you are taking medicines that sensitize the skin to light including non-steroidal anti-inflammatory agents (e.g. aspirin, ibuprofen, cetaminophen), tetracyclines, phenothiazines, thiazides, diuretics, sulfonylureas, sulfonamides, DTICs, fluorouracil, vinblastine, griseofulvin, alpha-hydroxy acids (AHAS), Beta-Hydroxi Acids (BHAS), Retin-A, Accutane and / or local retinoids.

- Do not use if you have a disease related to photosensitivity, e.g. porphyria, polymorphic light eruption, solar urticaria, lupus etc. These conditions make it the skin is more sensitive to light and the treatment can be unpleasant or causing swelling of the skin, blisters or infections.

Operating warnings

• Wear protective goggles when using the device.
• Clean the area of skin to be treated before use. It is not allowed to apply any cosmetics to avoid the destroy of instrument and affect result.
• Adjust the energy level from low to high level. On condition of safety, the higher the energy level is, the better result it will be. After treatment, it is normal to have skin redness.
  After the treatment, use moisturizing preparation and sun block product.
  After treatment then power off, please use wet cotton swab or cloth to clean treatment window. This can avoid hair and sebum of carbon sticking glass and affecting energy of shooting light.
  Please don't let system and accessories touch liquid or put it in humid environment. Please store instrument in ventilated and dry environment and keep far away from children.
  Please don't put metal object into heat emission hole. Otherwise there will be risk of electric shock.

Preparation before use

1. Use the hair shaving razor before use.

Note: Unshaved body or non-dropped skin hair can cause unfavorable operation of the device:

1. It can absorb part of the light energy, which may cause skin pain or redness.

2. Hair on the skin can burn, and in severe cases a hot layer of the skin is burned.

3. Before the procedure, do not use any cosmetics, balms or deodorants in the place where you plan a procedure.

4. Clean the place to release pulses with a damp cloth or swab. This takes place to remove hair and dust from the treatment window.

4 If you use B-Shine Ice for the first time, you can use automatic pulses mode to decide on energy intensity. You can also compare your skin color with a skin colors card to make sure that your skin color is suitable for depilation treatments.

skin color\hair color		brown	dark brown	black	dark gold	pale golden	red	white/gray
white		1-5	1-5	1-5	1-5	✕	✕	✕
beige		1-5	1-5	1-5	1-5	✕	✕	✕
light brown		1-5	1-5	1-5	1-5	✕	✕	✕
brown		1-3	1-3	1-3	1-3	✕	✕	✕
dark brown		✕	✕	✕	✕	✕	✕	✕
black		✕	✕	✕	✕	✕	✕	✕

1. Do you have a lower level and gradually increase, until you start feeling pulses on the skin. No pain should be felt, the treatment is to be pleasant.
2. Pulse output area is 4cm² . If it is suitable, please use it directly. If you want to treat smaller areas of skin such as the armpit, the area above the upper lip, deep bikini, you can use the 1cm² and 2cm² overlays.
3. Skin Tone Sensor: After each turn on, the device is locked and can't be operated. Please put the pulse area close to the skin, when the red light of the sensor is off, which means that the area has passed the skin tone detection, and you can use the device safely. When the skin tone test is passed, the device will be unlocked, and intelligently recommend a suitable energy level automatically (it is recommended to start from the low level when it is used for the first few uses).

uwaga: After power on, if the device doesn't perform skin tone detection steps, the device will not be unlocked and can't be operated.

1. If you are using the device for the first time or in a new area of the body, select a small area near the area you intend to undergo to test the sensitivity of the skin. Use the lowest level of the device. Follow the instructions for the procedure below, but emit no more than 2-3 flashes. After the skin test, wait 60 minutes and check that the skin does not react. If after 60 minutes the skin appears normal and there is no redness or other skin reaction, you are ready to perform the full procedure.

Product operation guide

Shave off the unwanted hair

Connect the power plug, long press the power button to turn on the device

Press the power button and adjust the appropriate energy, advice to start with level 1 for the first time

Wear professional goggles to avoid light damaging eyes

Ensure that light outlet touch the skin, press the emission button

More details pleaserefer to "Operation procedure"

Series of treatments

Make sure the pulse outlet touches the skin, press the emission button

A complete epilation cycle takes 8 weeks.

It is normal to see hair continue to grow after the first few uses. A whole series of treatments should be performed.

Period	Suggestion
1-4 weeks	2 times a week
5-8 weeks	once every 1-2 weeks
8 weeks or more	1 time for half or one month

1. To effectively remove visible hair and prevent the active growth of hair roots, depilation should be performed at least every 2 weeks during the first 2 months after the epilation phase.

2. Use it over and over again depending on your hair growth. A person with hard stubble can increase the energy level and increase the frequency accordingly. Different frequency of use due to different hair growth.

3. Subsequent treatments

* To ensure long-lasting smoothness of the skin, it is recommended to perform the depilation treatment every 4-6 weeks as a reminder treatment after the series.

Hair removal

Application

• Lip hair, armpit hair, body hair and legs, hair on places that affecting looks such as hair line on forehead and bikini area.
  The effect is different according to skin color. It is not suitable for white and light color hair.

How often to perform depilation treatment:

Usually, it is about 7-9 treatments. The first 3 treatments take place once a week. In the next 4-9 treatments, do one treatment every 2-3 weeks.

During the period of maintaining the depilation effect and preventing the hair roots from reactivating, regular treatments should be repeated so that the skin remains smooth. If the treatments are not continued, the hair roots will reactivate and the hair will grow back. In order to preserve the results, it is enough to repeat the treatments every 4–8 weeks, which will ensure that the hair roots will not activate and the hair regrowth will remain inhibited. The intervals between treatments may vary depending on the individual rate of hair regrowth.

How to perform depilation treatment:

Step 1: Before using the B-Shine Ice device, prepare the skin by shaving the selected area to be treated. The skin should also be washed.

Step 2: Put on safety glasses to avoid eye stimulation with IPL light. Refer to "Preparation before use" on page 27, pass the skin tone detection and unlock the device.

Step 3: Select the desired intensity (see "Choose the right intensity") and start from a low level.

Step 4: Let the treatment window touches treated areas vertically, and treat the areas by turns. Do not repeat again and again in the same place, nor omit any area.

Step 5: Start in the initial area and repeat step 4, 2–3 times.

Step 6: After the treatment it is recommended to use a moisturizer after depilation.

Step 7: Turn off the device and use a damp cloth or swab to clean the treatment window.

Step 8: Place the device and accessories in a case or box and store them in a safe place.

Photorejuvenation of the skin

Do you want to keep the skin young and healthy for years? We use our skin throughout the year by subjecting it to various atmospheric conditions. The exposure to the sun is particularly effective. Intense tanning usually leaves marks on the face or neckline, which is often difficult to mask with makeup. Similar discolorations also appear on the backs of the hands over time. How to deal with them?

People who want to visibly rejuvenate the skin and refresh its appearance, even out the color and reduce the stumbling discoloration, we offer photorejuvenation treatments with a modern B-Shine Ice cosmetic laser. Laser therapy B-Shine Ice allows for significant skin smoothing, complete removal of age spots or blushes.

The purpose of rejuvenation of selected parties are short and safe light pulses directed towards the surface of the skin. The light wave stimulates skin cells to produce collagen and elastin, which accelerate the regeneration of the skin.

The effect of the therapeutic effect of IPL radiation is the improvement of blood supply and oxygenation of the skin, increase in the number of collagen and elastic fibers, better absorption of moisture, regulation of the dyes and keratinization process.

Effects:

— Elimination of signs of skin aging
— Reconstruction of collagen fibers
— Firm and elastic skin
— Reducing the pores
— Smoothing wrinkles
— Improving skin hydration
— Lightening discoloration

How often to perform photorejuvenation treatment:

To obtain the desired effects, a series of treatments should be carried out. It is recommended to carry out a series of 8 treatments, one treatment each week.

How to perform photorejuvenation treatment:

Step 1: Before proceeding with the treatment, thoroughly clean the skin with makeup and cosmetics. Also, wipe the lamp.

Step 2: Put on safety glasses to avoid eye stimulation with IPL light. Refer to "Preparation before use" on page 27, pass the skin tone detection and unlock the device.

Step 3: Select the desired intensity (see "Choose the right intensity") and start from a low level.

Step 4: Allow the device window to touch selected areas vertically and treat them areas in turn. Do not repeat again and again in the same place, nor omit any area.

Step 5: Start in the initial area and repeat step 4, 2-3 times.

Step 6: After the procedure, it is recommended to use a strong moisturizer.

Step 7: Turn off the device and use a damp cloth or swab to clean the treatment window.

Step 8: Place the device and accessories in a case or box and store them in a safe place.

Acne treatment

The treatment of acne with IPL is intended for people with moderate acne lesions. IPL light destroys rapidly multiplying bacteria responsible for inflammatory changes in acne. The effect is similar to antibiotics that are used topically or generally. However, they can cause a number of side effects by destroying the liver and stomach.

Laser therapy B-Shine Ice, acts directly on the causes of acne. It works on synthesized by anaerobic bacteria, molecules of the so-called porphyrins. These make the bacterium particularly sensitive to light. When porphyrin is exposed to visible light, it becomes chemically active and achieves a state of arousal. This causes the formation of singlet oxygen, which connects to the cell membrane and destroys the anaerobic bacteria responsible for the formation of acne lesions and sebaceous gland cells.

IPL light therapy can not be combined with antibiotic therapy. You should also wait a few weeks after the end of such treatment

How often to conduct acne treatment:

The treatment period lasts about 8 - 16 weeks (2-4 months), and the treatments are performed every 1-2 weeks. It is best to perform two exposures of all areas attacked at a distance of about 10 minutes. Starting from the second week, the first signs of improvement are visible (reduction of the degree of inflammation of the affected areas and a slight reduction of the symptoms themselves).

After a series of treatments:

Almost acne spots are almost eliminated.

However, those that remain - they are no longer active - disappear within the next weeks.

After curing, it is recommended to apply Skin Rejuvenation therapy, which is able to stimulate collagen production in order to reduce the amount of acne scars.

During the entire treatment it is recommended to use appropriate skincare cosmetics for oily and acne skin.

How to perform an anti-acne treatment:

Step 1: Before proceeding with the treatment, thoroughly clean the skin with makeup and cosmetics. Also, wipe the lamp.

Step 2: If there is inflammation in the area that you want to treat, you should cure the skin before using the device.

Step 3: Wear eye protection to avoid eye stimulation with IPL light. Refer to "Preparation before use" on page 27, pass the skin tone detection and unlock the device.

Step 4: Select the appropriate intensity (see "Choose the right intensity") and start from a low level.

Step 5: Allow the device window to touch selected areas vertically and treat them areas in turn. The interval between pulses should be at least 20 seconds.

Step 6: After the treatment it is recommended to wash the face with a moisturizer.

Step 7: Turn off the device and use a damp cloth or swab to clean the treatment window.

Step 8: Place the device and accessories in a case or box and store them in a safe place.

Symbol of a trash bin with no text or labels, including a crossed-out box and a black rectangular base (no readable text or symbols)

The crossed-out wheeled bin symbol indicates that in the European Union after the end of the product's useful life it must be disposed of in a separate, dedicated collection point. Do not dispose of these products together with unsorted general household waste

Beauty Factor Sp. z o.o.

Hereby, Beauty Factor Sp. z o. o. declares that the device equipment Beautify B-Shine Ice is in compliance with Directive 2014/30/UE.

Polski

Beauty Factor Sp. z o.o.

Plac Bankowy 2

00-095 Warszawa

Assembled in China

WARUNKI GWARANCJI

1. The product warranty is valid for a period of 24 months.
2. The warranty covers the period from the date of receipt of the device from Beauty Factor Sp. z o. o. and covers defects resulting from causes inherent in the received device.
3. The device will be repaired as soon as possible, not exceeding 21 working days from the date of acceptance of the device for repair by an Authorized Service Center.
4. The customer has the right to apply for replacement of equipment free from defects, if the Authorized Service finds that the removal of the defect is impossible or requires excessive costs.
5. If only part of the product is defective and can be detached from the part of the product working properly, the Customer's rights resulting from this warranty limit only to the defective part of the product.

In order to benefit from the warranty conditions, please send a complaint notification together with the warranty card to the e-mail address [e-mail]

BEAUTIFLY

NAZWA / ADRES SPRZEDAWCY

NAME / ADDRESS OF THE SELLER

NR DOWODU ZAKUPU

NUMBER OF EVIDENCE OF PURCHASE

DATA SPRZEDAŻY

DATE OF SALE

NAZWA URZĄDZENIA

DEVICE NAME

NR SERYJNY / MODEL

SERIAL NUMBER / MODEL

I represent that I have read and accepted the terms and conditions specified in the Warranty Certificate.