5340.1 - Uncategorized Statron - Free user manual and instructions
Find the device manual for free 5340.1 Statron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Laboratory Power Supply |
| Brand | Statron |
| Model | 5340.1 |
| Input Voltage | 230 V AC, 50/60 Hz |
| Output Voltage Range | 0 – 30 V DC |
| Output Current Range | 0 – 5 A |
| Output Power | 150 W |
| Regulation Mode | Linear regulation |
| Display | Dual LED display for voltage and current |
| Protection Features | Overload, short circuit, and thermal protection |
| Cooling | Fan cooled with temperature control |
| Dimensions (W x H x D) | 200 x 80 x 150 mm |
| Weight | 1.2 kg |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Input Connector | IEC C14 (standard power cord) |
| Output Connectors | 4 mm safety banana jacks |
| Maintenance | Keep clean and dry; periodic calibration recommended |
| Safety Standards | CE, RoHS compliant |
Frequently Asked Questions - 5340.1 Statron
How do I adjust the output voltage and current?
Use the front panel knobs labeled VOLTAGE and CURRENT. Turn clockwise to increase, counterclockwise to decrease. The display shows the set values.
What should I do if the device shows overcurrent protection?
Reduce the current limit or the load. The protection activates when output current exceeds the set limit. Turn down the current knob or disconnect the load.
Can I connect the output in series or parallel?
This model is a single output; series or parallel connection is not supported. Use multiple units with caution.
How often should I calibrate the power supply?
Calibration is recommended every 12 months or whenever you notice inaccurate readings. Contact a qualified service center.
What is the maximum ambient temperature for operation?
The device operates safely at ambient temperatures from 0°C to 40°C. Avoid exposure to direct sunlight or heat sources.
Does the power supply have short circuit protection?
Yes, it has short circuit protection that limits current and prevents damage. The output will automatically recover once the fault is removed.
How do I clean the unit?
Disconnect the power cord. Use a soft, dry cloth to wipe the exterior. Do not use any liquids or solvents.
What type of power cord is required?
A standard IEC C13 to C14 power cord with a compatible plug for your region (e.g., Schuko, NEMA). The input is 230 V AC.
Is the device suitable for inductive loads?
It is designed for resistive loads primarily. For inductive loads like motors, use a suitable load or ensure proper filtering.
Where can I find the serial number?
The serial number is located on the rear panel near the power input, on a label with the model number and specifications.
User questions about 5340.1 Statron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 5340.1 - Statron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5340.1 by Statron.