KSZ 4300 UG - Saw Herkules - Free user manual and instructions

Product Type	Sliding Cross Cut and Mitre Table Saw with Base Frame
Brand	Herkules
Model	KSZ 4300 UG
Power Supply	230 V ~ 50 Hz
Power Consumption	2000 W
Idle Speed	4800 min⁻¹
Saw Blade Diameter	250 mm
Saw Blade Bore	30 mm
Saw Blade Thickness	3 mm
Number of Teeth	60 (carbide tipped)
Rotating Table Range	-45° to +60°
Tilting Motor Head Range	0° to 45° left
Max Panel Width	430 mm
Cutting Width at 90°	430 x 75 mm
Cutting Width at 45°	300 x 75 mm
Cutting Width at Double Mitre (2x45°)	300 x 40 mm
Includes Laser	Yes
Includes Dust Bag	Yes
Undercarriage Support	Yes, for stationary use
Clamping Device	Yes, for workpiece fixation
Weight	33.7 kg
Packing Dimensions (L x W x H)	870 x 560 x 440 mm
Spare Blade Options	∅250x30mm, 24, 48, or 60 teeth
Transport Locking	Yes

Frequently Asked Questions - KSZ 4300 UG Herkules

What is the maximum cutting width of the KSZ 4300 UG?

The maximum cutting width at 90° is 430 x 75 mm, at 45° it is 300 x 75 mm, and at double mitre (2x45°) it is 300 x 40 mm.

Can I use the saw for cutting laminate flooring?

Yes, due to its sliding feature and 430 mm width capacity, it can cut wide panels and laminate floorboards in one go.

How do I change the saw blade?

First unplug the saw. Use the spindle lock to secure the blade, then loosen the arbor nut with the provided wrench. Replace with a compatible blade (∅250 x ∅30 mm). Ensure the teeth direction matches.

What is the voltage and power rating?

The saw operates on 230 V ~ 50 Hz and has a power consumption of 2000 W.

Does the saw come with a laser guide?

Yes, the KSZ 4300 UG includes a laser for precise cutting alignment.

How do I adjust the mitre angle?

The rotating table allows adjustment from -45° to +60°. Loosen the locking handle, rotate to the desired angle, and re-tighten. The motor head can also tilt left from 0° to 45° for bevel cuts.

What accessories are available?

Spare saw blades with 24, 48, or 60 teeth are available (article numbers: 43.111.10, 43.111.11, 43.111.13). Other accessories may be available; check the manual.

How heavy is the saw?

The saw weighs approximately 33.7 kg, making it suitable for stationary setup.

How do I maintain the saw?

Keep the blade clean and sharp. Regularly check for wear on carbon brushes. Lubricate moving parts as per manual. Always unplug before maintenance.

Does the saw have a dust collection system?

Yes, it comes with a dust bag to collect sawdust. For better extraction, it can be connected to an external vacuum.

USER MANUAL KSZ 4300 UG Herkules

Sliding Cross cut- and mitre table saw with base frame KSZ 4300 UG

Art.-No.: 43.006.73

Bar code: 4006825532647

Sales unit: 1 pc

The sliding cross cut- and mitre table saw KSZ 4300 UG warrants a clean and smooth cut of wooden parts without problems. Double mitre cuts are possible with its tilting and swivelling motor-head. Due to its sliding feature the saw can cut 430 mm wide and therefore wide panels and laminate floorboard can be cut in one go. The undercarriage support makes the unit ideal for stationary or permanent service.

Features:

• Carbide tipped saw blade (1)
• Rotating table for precise angle cuts ranging from -45^ to +60^ (2)
• Undercarriage support (3)
• Clamping device form for fixation of work piece (4)
• Tilting motor head to the left continuously from 0^ to +45^ (5)
• Including dust bag (6) and transport locking
• Including laser

As special accessory available:

Technical data:

• Mains: 230 V \~ 50 Hz
• Power: 2000 watts
• Idle speed n _o : 4800 min
• Saw blade: ∅ 250 x ∅ 30 x 3 mm
• No. of teeth: 60
• Turning range: -45 °/ 0°/+60 °
• Panels max.: 430 mm
• Mitre cut: 0^ to 45^ to the left
• Cutting width at max. 90°: 430 x 75 mm
• Cutting width at max 45°: 300 x 75 mm
• Cutting width at max. 2x45°:300 x 40 mm (Width at double mitre cut):
• Weight: approx. 33.7 kg
• Packing dimension: 870 x 560 x 440 mm

Mechanical device with a blue fan and mechanical components, showing motion direction indicated by red arrow (no text or symbols)

Mechanical device with a 80° angle annotation and measurement range (430 x 75 mm), no readable text or symbols beyond the measurement label.

Technical illustration of a mechanical device with a cutting tool and a red warning symbol (no readable text or symbols)

Spare saw blade

∅ 250 x ∅ 30 x 3,2 mm; teeth = 60

Carbide-tipped saw blade Art.-No.: 43.111.10

250 x ∅ 30 mm; teeth = 24

Carbide-tipped saw blade Art.-No.: 43.111.11

∅ 250 x ∅ 30 mm; teeth = 48

Art.-No.: 43.111.13

Bar code: 4006825503166

43.111.10

Bar code: 40068254431223

43.111.11

Bar code: 4006825431230