17-096 - Glue gun NEO - Free user manual and instructions

Product Type	Glue Gun
Brand	NEO
Model	17-096
Power Supply	Mains-powered (plug)
Heating Temperature	Up to 200°C
Preheat Time	3-5 minutes
Nozzle Type	Metal, cleanable with needle
Safety Stand	Included, must be installed before use
Power Indicator	Yes, lights when on
Trigger	Variable control for glue flow
Glue Stick Feed	Manual push via trigger
Cleaning	Use a needle to clear nozzle blockage
Safety Features	Warns of hot nozzle (200°C); do not touch; keep away from children; unplug when not in use
Compatible Glue Sticks	Standard glue sticks (diameter not specified)
Environmental Disposal	Do not dispose with household waste; recycle at appropriate facility

Frequently Asked Questions - 17-096 NEO

Why is no glue coming out of the nozzle?

First, check that the gun is properly plugged in and switched on. Allow 3-5 minutes for preheating. If still no glue, the nozzle may be blocked. Use a needle to clean the nozzle opening. Also make sure a glue stick is inserted.

How do I clean a blocked nozzle?

Unplug the glue gun and let it cool. Use a needle to gently remove any debris from the nozzle opening. Avoid using excessive force.

What should I do if the glue stick does not move forward?

Insert a new glue stick into the feed port to push the remaining stick forward. Ensure the stick is straight and clean.

How can I prevent backflow of glue?

Keep the nozzle and glue sticks clean. Stop using the gun immediately if backflow occurs and clear the nozzle with a needle.

How long does it take to preheat the glue gun?

Preheat time is 3 to 5 minutes. The power indicator will light when the gun is on.

Can children use this glue gun?

Yes, children aged 8 and above can use it under supervision. Ensure they understand the risks and operate it safely.

Can I leave the glue gun plugged in when not in use?

No, always unplug the glue gun when not in use to prevent continuous melting and potential hazards.

How can I save glue while using the gun?

Press the trigger moderately to control the amount of glue melted. Avoid pressing hard continuously.

What is the operating temperature of the nozzle?

The nozzle can reach up to 200°C. Do not touch it during or after use until it cools completely.

How should I dispose of the glue gun at the end of its life?

Do not throw it in household trash. Take it to a recycling facility for electrical waste. Check with local authorities for proper disposal.

USER MANUAL 17-096 NEO

EN Instructions:

Glue guns 17-090,17-095,17-096,17-097,17-100

1. Please make sure that the cable is safe and not damaged and the nozzle and the glue stick are clean before use.
2. Operation steps

• Install the safety stand holder securely.
- Insert the glue stick into the glue stick hold port.
- Plug in the power and switch it on, then the power indication will light on.
• Preheat the gun 3 to 5 minutes.
- Pull the trigger to release the melted glue on the surface of the objects, and then glue together the separate objects in 30 seconds.
- Keep the objects pressing each other about 5 minutes and then let the meted glue dry and cool down. Then it's done.

1. When the glue stick is inserted into the glue stick hold port and becomes shorter, please insert a new glue stick to push the remaining glue stick.

Trouble shooting:

Trouble	Solution
There is no glue coming out from the nozzle.	The gun is not heating.If the power socked is not plugged well, please plug it again. If the gun doesn't work, please contacts us.
	The gun is heating.If there is some blockage inside the nozzle, use a needle to clean the clogged area. If some backflow happens, please follow the steps mentioned in the section “Backflow problem” below.
	The glue stick can't move forward to be melted.Please insert a new glue stick to push the remaining stick.
Backflow problem	The nozzle and the glue stick need to be clean.Stop using the glue gun immediately and clear out the clogged area of the nozzle.
	Prevention tips.
	Keep the glue sticks clean to avoid impurity or blockade in the nozzle.
How to save the glue	Controlling the trigger.The harder you press the trigger, the more the glue stick will be melted and released.Just press the trigger moderately during the operation.
	Stop continuously pressing trigger or switch off and unplug the glue gun.If you plan to stop the operation, pleases switch off or unplug the glue gin 5 – 10 mins in advance so that it won’t continuously melt the glue stick.
How to ensure safety	Don’t pull out the remaining glue stick during or after using the device.
	If you don’t use this device, unplug it from the power outlet and don’t try to recycle the used or melted glue stick.
	The heating nozzle can produce heat up to 200°C during the operation.Please avoid touching this area, and only hold the gun handle.
	To avoid electric shock during the operation, don’t use this device in high humidity environment. Keep the device away from children or make sure that children use it under adults’ guidance.
	Don’t disassemble the glue gun in any case.

WARNING! This device can be used by children aged 8 or

above and by people with limited physical, mental or sensory abilities, or by people without experience and knowledge, if they are supervised or were given the instructions of proper device operation, and understand the risk. Children can not play with equipment. Children can not clean and maintain the device without supervision

ENVIROMENTAL PROTECTION

Do not dispose of electrically powered products with household wastes, they should be utilized in proper plants. Obtain information on waste utilization from your seller or local authorities. Used up electric and electronic equipment contains substances active in natural environment. Unrecycled equipment constitutes a potential risk for environment and human health.

"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes, drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later amendments). Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of Grupa Topex are strictly forbidden and may cause civil and legal liability.

RU Инструкции: