17-095 - Glue gun NEO - Free user manual and instructions

Product Type	Glue Gun
Brand	NEO
Model	17-095 (also compatible with 17-090, 17-096, 17-097, 17-100)
Power	30 W (typical)
Voltage	220-240 V AC, 50/60 Hz
Heating Element Temperature	Up to 200°C
Preheat Time	3-5 minutes
Glue Stick Diameter	11 mm (standard size)
Cord Length	1.5 m (approx.)
Weight	0.3 kg (approx.)
Safety Features	Safety stand, built-in fuse (overload protection)
Nozzle Material	Metal (copper or brass)
Housing Material	Plastic
Power Indicator	Yes (LED)
Trigger Action	Manual trigger to feed glue stick
Operation Type	Continuous with intermittent trigger control
Usage Environment	Indoor, dry conditions
Recommended Glue Type	EVA or hot melt glue sticks (clean and impurity-free)
Package Contents	Glue gun, safety stand, user manual

Frequently Asked Questions - 17-095 NEO

How do I use the NEO 17-095 glue gun?

First, install the safety stand securely. Insert a glue stick into the port, plug in the power and switch it on. The power indicator will light. Preheat for 3–5 minutes. Pull the trigger to release melted glue onto the surface, then press the objects together within 30 seconds. Hold them for about 5 minutes until the glue dries and cools.

What should I do if no glue comes out?

If no glue comes out, check if the gun is heating. If not, ensure the power plug is securely connected. If the gun is hot but no glue, there may be a blockage. Use a needle to clean the nozzle. If backflow occurs, follow the backflow procedure in the manual.

How can I prevent backflow of glue?

Keep both the nozzle and glue sticks clean. If backflow happens, stop using the gun immediately and clear the clogged area. To prevent it, always use clean glue sticks and avoid impurities.

Can I use the glue gun near water or in humid environments?

No, to avoid electric shock, do not use the device in high humidity environments. Keep it away from water and only use in dry indoor areas.

How do I clean the glue gun?

Unplug the gun and let it cool down completely. Clean the nozzle with a needle to remove any dried glue. Wipe the exterior with a dry cloth. Do not immerse in water or use abrasive cleaners.

What type of glue sticks should I use?

Use standard 11 mm diameter EVA or hot melt glue sticks. Ensure they are clean and free of impurities to prevent nozzle blockage.

How do I replace the glue stick?

When the current glue stick becomes short, insert a new one into the port. The new stick will push the remaining piece forward. Do not pull out a used stick while the gun is hot or still plugged in.

What is the maximum temperature of the nozzle?

The heating nozzle can reach up to 200°C. Avoid touching the nozzle area during operation. Always hold the gun by the handle.

Can I leave the glue gun unattended while it is on?

No, never leave the glue gun unattended when plugged in or switched on. If you plan to stop operating, switch off or unplug the gun 5–10 minutes in advance to prevent continuous melting of glue.

How should I dispose of the glue gun?

Do not dispose of it with household waste. Follow local regulations for recycling electronic equipment. Unrecycled devices can harm the environment. Contact your seller or local authorities for proper disposal.

USER MANUAL 17-095 NEO

EN Instructions:

Glue guns 17-090,17-095,17-096,17-097,17-100

1. Please make sure that the cable is safe and not damaged and the nozzle and the glue stick are clean before use.
2. Operation steps

• Install the safety stand holder securely.

- Insert the glue stick into the glue stick hold port.

- Plug in the power and switch it on, then the power indication will light on.

• Preheat the gun 3 to 5 minutes.

- Pull the trigger to release the melted glue on the surface of the objects, and then glue together the separate objects in 30 seconds.

- Keep the objects pressing each other about 5 minutes and then let the meted glue dry and cool down. Then it's done.

1. When the glue stick is inserted into the glue stick hold port and becomes shorter, please insert a new glue stick to push the remaining glue stick.

Trouble shooting:

Trouble	Solution
There is no glue coming out from the nozzle.	The gun is not heating.If the power socked is not plugged well, please plug it again. If the gun doesn't work, please contacts us.
	The gun is heating.If there is some blockage inside the nozzle, use a needle to clean the clogged area. If some backflow happens, please follow the steps mentioned in the section "Backflow problem" below.
	The glue stick can't move forward to be melted.Please insert a new glue stick to push the remaining stick.
Backflow problem	The nozzle and the glue stick need to be clean.Stop using the glue gun immediately and clear out the clogged area of the nozzle.
	Prevention tips.
	Keep the glue sticks clean to avoid impurity or blockade in the nozzle.
How to save the glue	Controlling the trigger.The harder you press the trigger, the more the glue stick will be melted and released.Just press the trigger moderately during the operation.
	Stop continuously pressing trigger or switch off and unplug the glue gun.If you plan to stop the operation, pleases switch off or unplug the glue gin 5 – 10 mins in advance so that it won’t continuously melt the glue stick.
How to ensure safety	Don’t pull out the remaining glue stick during or after using the device.
	If you don’t use this device, unplug it from the power outlet and don’t try to recycle the used or melted glue stick.
	The heating nozzle can produce heat up to 200°C during the operation.Please avoid touching this area, and only hold the gun handle.
	To avoid electric shock during the operation, don’t use this device in high humidity environment. Keep the device away from children or make sure that children use it under adults’ guidance.
	Don’t disassemble the glue gun in any case.

WARNING! This device can be used by children aged 8 or

above and by people with limited physical, mental or sensory abilities, or by people without experience and knowledge, if they are supervised or were given the instructions of proper device operation, and understand the risk. Children can not play with equipment. Children can not clean and maintain the device without supervision

ENVIROMENTAL PROTECTION

Do not dispose of electrically powered products with household wastes, they should be utilized in proper plants. Obtain information on waste utilization from your seller or local authorities. Used up electric and electronic equipment contains substances active in natural environment. Unrecycled equipment constitutes a potential risk for environment and human health.

"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes, drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later amendments). Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of Grupa Topex are strictly forbidden and may cause civil and legal liability.

RU Инструкции: