Lafe

SWS-001 - Hair Dryers Lafe - Free user manual and instructions

Find the device manual for free SWS-001 Lafe in PDF.

📄 32 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Lafe SWS-001 - page 7
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeHair Dryer
ModelSWS-001
BrandLafe
Rated VoltageAC 220-240V, 50-60Hz
Maximum Power1000W
Noise Level72 dB
Foldable HandleYes
Overheating ProtectionAutomatic shut-off
Heat-resistant HandleYes
Power Switch2-speed slide switch
Air InletRear grille
Air OutletFront nozzle
Cleaning MethodWipe exterior with soft damp cloth; do not use harsh chemicals
Safety FeaturesDo not immerse in water; do not use near water; auto shut-off if blocked
Intended UseDomestic only, not for commercial or outdoor use
Cord TypeDetachable? Not specified; integrated cord
Plug TypeStandard plug for rated voltage
WarrantyNot specified
Package ContentsHair dryer, user manual
CertificationsCE? Not specified

Frequently Asked Questions - SWS-001 Lafe

How do I clean the hair dryer?
Always unplug the device and let it cool completely before cleaning. Wipe the exterior with a soft, damp cloth. Do not use harsh chemicals or abrasives. If the rear air inlet collects hair or dust, take it to a service facility for professional cleaning.
What should I do if the hair dryer overheats and shuts off?
The hair dryer has an automatic overheating protection. If it shuts off, turn it off, unplug it, and allow it to cool for several minutes. Ensure the air inlet and outlet are not blocked before restarting.
Can I use the hair dryer in the bathroom?
The hair dryer is not intended for use near water. Do not use it in a bathtub, shower, sink, or other water-filled vessels. If used in a bathroom, unplug it after each use to avoid electrical hazards.
What is the voltage requirement for this hair dryer?
The hair dryer operates on AC 220-240V, 50-60Hz. Check your local power supply before use. Using incorrect voltage may damage the device or cause injury.
Can I use an extension cord with this hair dryer?
It is recommended not to use extension cords. If necessary, ensure the extension cord meets current electrical standards and codes, and has sufficient rating for the device's power (1000W).
Is the handle foldable?
Yes, the hair dryer features a foldable handle for easy storage and travel. Fold the handle towards the body when not in use.
What does the power switch do?
The power switch controls the fan speed. It typically has two settings: low and high. Slide the switch to the desired position to turn on and adjust airflow.
How should I store the hair dryer?
Always unplug and let it cool. Fold the handle and store it in a dry, safe place away from moisture. Do not wrap the cord around the device tightly.
Is the hair dryer suitable for travel?
Yes, its compact size and foldable handle make it convenient for travel. However, ensure the voltage in your destination matches 220-240V, or use a suitable voltage converter.
What should I do if the appliance malfunctions?
Do not attempt to repair it yourself. Contact a specialized repair facility. If the power cord or plug is damaged, have it replaced by qualified personnel.

User questions about SWS-001 Lafe

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Hair Dryers in PDF format for free! Find your manual SWS-001 - Lafe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SWS-001 by Lafe.

USER MANUAL SWS-001 Lafe

LAFE SWA-001 and SWA-002 Hair Dryer is intended for drying hair. The hair dryer features a foldable handle. Small size and foldable handle make it easy to travel with and to store.

WARNING:

The device is intended for domestic use only.

The device is NOT intended for commercial/professional use.

The device in NOT intended to be used outside.

Note! Prior to use, you should familiarize yourself with this instruction manual in order to avoid accidents and to ensure proper use of the appliance. Manual should be kept and stored so that it is always easy to reach.

SAFETY INSTRUCTIONS FOR USE

1 – Before use, check if the voltage indicated on the rating plate corresponds to the local power supply parameters, bearing in mind that the designation AC means alternating current and DC – direct current.
2 - Expand and straighten the power cord before use.
3 - Make sure that the power cord and the plug do not have any visible damage.
4 – Make sure that the power cord is not stretched over an open flame or other source of heat as well as sharp edges that may damage the insulation.
5 – Before first use, remove all packing elements.

Note! Housing with metal elements may include barely-visible protective film stretched over those parts, which needs to be removed.

6 – The appliance should not be used by children or persons with reduced physical, sensory and mental ability without attendance of qualified or experienced persons and should always be used in accordance with the instruction manual.

7 – Do not leave the appliance unattended during operation.

8 – Do not immerse the device and the power cord in water or any other liquid.

9 – When the appliance is not in use, it should always be disconnected from the electrical outlet.

10 - When removing the plug from the socket, do not pull the cord, but the plug.

11 - NEVER PLACE ANY METAL ITEMS inside the appliance.

12 – Please note that some parts of the device become very hot during use, so be careful and do not touch them, as you may get burned – only the handle of the device is made of heat-resistant materials. For this reason, it is recommended that you operate the device using only the handle, until it cools off.

13 – The manufacturer shall not be liable for any damage caused by improper cleaning of the appliance.

For security reasons, it is recommended for the electrical wiring to be equipped with a 30 mA residual-current circuit breaker.

Note: If the power cord or the mains plug is damaged, it should always be replaced or repaired at a specialized repair facility.

WARNINGS

  • Never use the appliance if it is damaged or works abnormally.
  • Do not use the appliance if it has been dropped from a height and shows visible signs of damage.
  • Do not use extension cords or other electrical outlets that do not meet current electrical standards and codes.
  • Any repair, removal or replacement of any parts should always be performed at a specialized facility.
  • In the event of external components such as the electrical contacts, the plug or the cord getting wet, make sure to dry the kettle and its elements before use.
  • Never handle or operate the appliance with wet hands.
  • If you think the appliance might be broken, NEVER try to repair it yourself.
  • Do not use the device in the bath, over a sink, in the shower or in the vicinity of any vessel filled with water or other liquid
  • Do not use the device with wet hands
  • Never wash the device under running water or in a way that may result in water dripping into it.
  • Never place a plugged-in device on wet surfaces.

When using the hair dryer is used in the bathroom, unplug after use, since the proximity of water presents a hazard even when the hair dryer is turned off.

NOTE: The device is equipped with a system to prevent overheating. When the air inlet or outlet is blocked or restricted and the temperature inside this unit rises, the unit turns off automatically. If this occurs, turn off the device, disconnect it from the electrical outlet and allow it to cool. When you turn it on again, the device should work properly.

General information:

Model SWA-001 / SWA-002

Fig.1

1) Housing
2) Heat-resistant handle
3) Power level switch
4) Air outlet
5) Air inlet
6) Power cord
7) Power plug

① LoF ② ③ ④ ⑤ ⑦ ⑥ or elements of the packaging

Operating instruction:

Prior to first use :

  • Remove the protective film and all other elements of the packaging.
  • Unwind and straighten the power cord.

Use – exploitation

Drying

  • Make sure that the device is not exposed to water, and that you are not standing on a wet surface
  • Connect the device to a suitable outlet.

Cleaning and Maintenance

Warning! Clean the device only when it's cold!

  • Before cleaning, always unplug the device from the power supply - unplug the power cord.
  • Exterior of the housing can be cleaned using a soft, damp cloth. Do not use any harsh chemicals or abrasives.
  • If the rear of the housing collects a lot of pollutants such as hair, you should take the device to an appropriate service facility in order to have it cleaned.
  • Do not use harsh chemicals, such as detergents or solvents.
    • After cleaning, wipe the device dry.

Technical data

Model: SWA-001 / SWA-002
Rated voltage: AC 220-240V50-60Hz
Max. power: 1000W / 1000W
Noise level 72 dB

Vážený zákazníku!

Kasutusjuhend:

Symbol of electronic and electrical equipment waste (WEEE – Waste Electronic and Electrical Equipment).

Using the WEEE symbol means that this product cannot be treated as household waste. By providing appropriate recycling you help to save the natural environment. In order to get more detailed information about the recycling of this product, contact the local authority representative, waste treatment service provider or the store in which the product has been purchased.

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Lafe

Model : SWS-001

Category : Hair Dryers