ZM3131 - Light Emos - Free user manual and instructions

Product Type	LED Luminaire
Brand	Emos
Model	ZM3131
IP Rating	IP54 (suited for indoor and outdoor use)
Power Supply	230 V~, 50/60 Hz
Connection Wiring	L (brown) - live, N (blue) - neutral
Mounting Type	Fixed mounting on solid base (e.g., wall)
Light Source	LED (non-replaceable chips)
PIR Sensor - Detection Angle	120°
PIR Sensor - Detection Distance	1-10 m
PIR Sensor - Detection Motion Speed	0.6-1.5 m/s
PIR Sensor - Time Delay	Min 10 s ±5 s, Max 5 min ±1 min
PIR Sensor - Ambient Light Threshold	10-2000 lux (adjustable)
PIR Sensor - Sensitivity Adjustment	Set by moving sensor left/right
PIR Sensor - Lux Setting	Adjustable via button A
PIR Sensor - Time Delay Setting	Adjustable via button B
Safety	Disconnect from AC before servicing. Only authorized personnel.
Maintenance & Cleaning	Clean with dry cloth, no harsh chemicals. Replace broken cover immediately.
Disposal	Do not dispose with domestic waste. Use special collection points.
Certification	CE compliant, Declaration of Conformity at http://www.emos.eu/download

Frequently Asked Questions - ZM3131 Emos

How do I install the Emos ZM3131 luminaire?

Mount the luminaire firmly onto a solid base (e.g., wall). Connect the power cord to mains 230 V~: L (brown) live wire, N (blue) neutral wire. This operation should be carried out only by an authorized person. Ensure the connecting conductor is not connected to the mains during installation.

Can the ZM3131 be used outdoors?

Yes, the ZM3131 has an IP54 rating, which means it is suited for both indoor and outdoor use. It is protected against dust and splashing water.

How do I adjust the PIR sensor settings?

You can adjust the detection field by moving the motion sensor switch left or right. The ambient light threshold (10-2000 lux) is set with button A, and the time delay (10 s to 5 min) is set with button B.

What does the PIR sensor detection distance and angle cover?

The detection angle is 120°, and the detection distance ranges from 1 to 10 meters. It detects motion at speeds of 0.6 to 1.5 m/s.

Can I replace the LED chips in the ZM3131?

No, the LED chips inside the luminaire are not replaceable. If the LED fails, the entire luminaire must be replaced.

What should I do if the cover is broken?

Do not use the luminaire with a broken cover. Replace the broken cover immediately with a new one to avoid electrical and safety hazards.

Why does the light not turn on?

Check that the power supply is connected correctly and the mains is on. Ensure the PIR sensor settings (ambient light threshold and time delay) are properly adjusted. If still not working, consult an authorized service person.

How should I clean the luminaire?

Disconnect the luminaire from the mains before cleaning. Use a dry, soft cloth. Do not use harsh chemicals or abrasive materials.

Is the ZM3131 dimmable?

No, the ZM3131 is not dimmable. It operates at full brightness when triggered by the PIR sensor.

How do I dispose of the ZM3131 properly?

Do not dispose of the luminaire with household waste. Use special collection points for sorted waste. Contact local authorities for information about collection points.

USER MANUAL ZM3131 Emos

LED luminaire is designed for indoor use to be mounted on a solid base.

Ingress Protection: IP54 – suited for both indoor and outdoor use.

Mounting

Mount the luminaire firmly onto a solid basis, for example a wall.

Connect the power cord to the mains 230 V\~.

Connecting conductor must not be connected to the mains at time of installation. This operation can be carried out only by an authorized person.

L-brown-live wire

N - blue - neutral wire

PIR sensor - specification:

Time-delay: min. 10 s ±5 s – max. 5 min ±1 min

Detection angle: 120°

Ambient luminaire: 10 lux -> 2 000 lux (adjustable)

Detection distance: 1–10 m

Detection motion speed: 0.6–1.5 m/s

PIR sensor setting:

Detection field is possible to be set by moving the motion sensor switch to the left and to the right.

Adjustment of the ambient luminaire (sensitivity)

You can choose at what luminosity will the sensor go on by a button A (see picture no. 5).

Time-delay

You can set the time-delay of the luminaire by a button B (see picture no. 5)

WARNING

• Luminaire is suitable entirely for fixed mounting.
• The luminaire can be connected only to the electric distribution network, whose installation and protection complies with the applicable standards.
• Before any manipulation or servicing of the luminaire disconnect the luminaire from AC power. This operation can be carried out only by an authorized person.
• In case of any damage to any part of the luminaire, don't use it.
  • LED chips inside the luminaire are not replaceable.
• Don't change inner wiring of the luminaire.
• In case of broken cover don't use the luminaire and replace broken cover with new one immediately.

EMOS spol. s r.o. declares that the LED wall light is in compliance with the essential requirements and other relevant provisions of Directive. The device can be freely operated in the EU. The Declaration of Conformity can be found at http://www.emos.eu/download.

GB | Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points. If the electronic devices would be disposed on landfi ll, dangerous substanoes may reach groundwater and subsequently food chain, where it could affect human health.