LD 1337 F - TV Stand ECG - Free user manual and instructions

Product Type	Universal TV Wall Mount
Brand	ECG
Model	LD 1337 F
Compatible TV Sizes	24" - 42"
Maximum TV Weight	25 kg
VESA Standards Supported	75x75, 100x100, 200x100, 200x200 mm
Distance from Wall	19 mm
Wall Compatibility	Wooden crossbars (studs) and solid concrete
Installation Method	Wall plate mounted with bolts and dowels; TV adapter attached to TV
Included Hardware	Screws (M4, M5, M6 in various lengths), washers, distance washers, wall bolts, dowels
Security Feature	Security bolts on bottom side to lock TV onto mount
Tools Required	Drill, screwdriver, wrench, measuring tape
Recommended Personnel	At least two people for installation; professional recommended
Safety Standards	Complies with EU directives on electromagnetic compatibility and electrical safety
Usage Environment	Indoor, household use only
Disposal	Recycle as electronic waste; do not discard with household waste

Frequently Asked Questions - LD 1337 F ECG

What TV sizes are compatible with the ECG LD 1337 F mount?

The mount is designed for TVs with panel sizes from 24 inches to 42 inches.

What is the maximum weight the mount can hold?

The maximum TV weight is 25 kg (55 lbs). Do not exceed this limit.

Which VESA patterns does this mount support?

It supports VESA patterns: 75x75, 100x100, 200x100, and 200x200 mm.

What tools are needed for installation?

You will need a drill, screwdriver, wrench, and measuring tape. A level is also recommended.

Can I install this mount on a concrete wall?

Yes, it is suitable for solid concrete walls. Use the provided dowels (L) and drill 10 mm diameter holes 50 mm deep.

How far from the wall will my TV sit?

The TV will sit approximately 19 mm from the wall.

Does the mount include all necessary hardware?

Yes, the package includes screws (M4, M5, M6) in various lengths, washers, distance washers, wall bolts, and dowels for different TV back panel types.

How do I secure the TV to the mount?

After attaching the TV adapter to the TV, insert the TV component into the wall plate and tighten the security bolts located on the bottom side of the mount.

Is professional installation recommended?

Yes, if you are unsure about any step, consult a qualified professional. Improper installation can cause damage or injury.

Can I use this mount outdoors?

No, this mount is designed for indoor household use only. Outdoor use may lead to product failure or injury.

USER MANUAL LD 1337 F ECG

Black metal mechanical component with circular cutouts and mounting holes (no text or symbols)

LD 1337 F

UNIVERZÁLNÍ DRŽÁK TV

NÁVOD K OBSLUZE

CZ

UNIVERZÁLNY DRŽIAK TV

NÁVOD NA OBSLUHU

SK

UNIVERSAL TV MOUNT

INSTRUCTION MANUAL

GB

Four grayscale icons showing different types of tools: screwdriver, wrench, drill bit, and measuring tape (no text or symbols)

Technical line drawing of a mechanical assembly with a tool inserted into a panel (no text or symbols)

Four grayscale icons showing different types of tools: screwdriver, wrench, drill bit, and measuring tape (no text or symbols)

Technical line drawing of a mechanical assembly with a tool inserted into a bracket (no text or symbols)

Read carefully and save for future use!

Please refer to a qualified professional to install the wall mount properly. Prior to the wall mount installation, check the contents of the assembly set and inform your vendor in case you discover any components are missing or are defective. Do not use defective components!! Use the wall mount solely for the purpose intended by the manufacturer. Make sure the wall is capable of supporting (especially in terms of weight) the wall mount prior to installing. Also make sure no power, water, gas or other lines are located behind the wall in the installation area. Keep the specified distance between the TV and wall (depends on the TV model). Install the wall mount to a safe location, which does not present a risk to anyone. Once the wall mount and flat screen TV are mounted, ensure that the stability and safety are sufficient. This inspection shall be repeated on a regular basis (at least 4 times a year).

The equipment is intended to be installed on wooden crossbars or solid concrete walls. Prior to the installation, make sure the assembly surface has he necessary loading capacity to carry the total weight of the TV and mount. Do not exceed the maximum TV weight of the mount.

This product is designed for household use only. Using the product outdoors can result in product failure or injury. The manufacturer is not liable for damages to the equipment and health caused by improper installation of the wall mount.

1. Read all instructions and make sure you understand them prior to the installation. If you are not sure about any part of the installation process, contact a professional technician for support.
2. The wall or surface on which the mount will be anchored to shall be capable of carrying the entire weight of the wall mount and TV. Reinforcement will be required otherwise.
3. The installation requires the cooperation of at least two people and the use of a mechanical security mechanism and suitable tools. Otherwise it could result in damage to property or serious injury or fatal injury.
4. Follow all instructions and recommendations concerning adequate ventilation and selecting a suitable location for anchoring the TV. See the your TV user's manual for more information.
5. The product contains smaller pieces, which upon being inhaled or swallowed can lead to choking. Keep these pieces away from children!

ASSEMBLY SET DESCRIPTION

ASSEMBLY

Tools required for the assembly:

GB

1A – Wooden crossbar assembly

Use the wall board as a template. Make sure that it is level, mark the mounting holes into the centre of the wooden post. Drill holes 5 mm in diameter and 50 mm deep. Align the wall board into a level position and use long bolts (J) and washers (K) to anchor the board to the wall. Tighten the bolts firmly, but not too much.

Wooden post Wooden post

Technical line drawing of a mechanical assembly with a tool inserted into a bracket (no text or symbols)

1B – Concrete wall assembly

Apply the wall board to the wall, align into a level position and use it as a template to mark the holes. Drill holes 10 mm in diameter and 50 mm deep. Insert dowels (L) and long bolts (J) with washers (K) into the holes and tighten the wall board to the wall. Tighten the bolts firmly, but not too much.

2 - Attaching the mount to the TV

Align the TV adapter vertically with respect to the back TV panel.

If the back TV panel is straight, select shorter bolts of suitable dimensions (A, C, E) and use four bolts of the selected size, four washers (G or H) to anchor the TV adapter to the back TV panel. Tighten the bolts firmly, but not too much.

If the back TV panel is curved, select longer bolts of suitable dimensions (B, D, F) and use four bolts of the selected size, four washers (G or H) and distance washers (I) to anchor the TV adapter to the back TV panel. Tighten the bolts firmly, but not too much.

3 - Installing a fl at screen TV

Insert the TV part of the mount anchored to the TV into the wall piece anchored to the wall. Secure with security bolts.

TECHNICAL SPECIFICATIONS

Panel size: 24" - 42"

Maximum TV weight: 25 kg

VESA dimensions: 75×75, 100×100, 200×100, 200×200

Distance from wall: 19 ~mm

Security bolts on the bottom side of the mount

USE AND DISPOSAL OF WASTE

Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic recycling containers.

DISPOSAL OF PRODUCTS AT THE END OF LIFETIME

Disposal of electric and electronic equipment (valid in EU member countries and other European countries with an implemented recycling system)

The represented symbol on the product or package means the product shall not be treated as domestic waste. Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative impacts on human health and the environment by properly recycling your product.

Recycling contributes to preserving natural resources. For more information on the recycling of this product, refer to your local authority, domestic waste processing organization or store, where you purchased the product.

This product complies with EU directive requirements on electromagnetic compatibility and electrical safety.

The instruction manual is available at website www.ecg.cz.

Changes in text and technical parameters reserved.

08/05

www.ecg.cz