WS103 - Receiver Elektrobock - Free user manual and instructions
Find the device manual for free WS103 Elektrobock in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Receiver |
| Brand | Elektrobock |
| Model | WS103 |
| Dimensions (H x W x D) | 85 mm x 85 mm x 30 mm |
| Weight | 100 g |
| Power Supply | 230 V AC, 50/60 Hz |
| Power Consumption | < 0.5 W (standby) |
| Frequency | 433.92 MHz |
| Range | Up to 30 m (indoor) |
| Functions | Remote on/off switching, compatible with Elektrobock transmitters |
| Installation | Wall mounting (surface or flush) |
| Protection Rating | IP20 |
| Operating Temperature | -10°C to +40°C |
| Material | Plastic (ABS) |
| Color | White |
| Maintenance and Cleaning | Clean with a soft, dry cloth. Do not use water or cleaning agents. |
| Safety Information | Installation only by qualified personnel. Disconnect power before installation. |
| Spare Parts and Repairability | No user-serviceable parts. Contact service center for repairs. |
| General Information | Wireless receiver for home automation; complies with CE standards. |
Frequently Asked Questions - WS103 Elektrobock
How do I pair the WS103 receiver with a transmitter?
To pair, press and hold the pairing button on the receiver for 3 seconds until the LED flashes, then activate the transmitter. The LED will stay on when paired successfully.
What is the maximum range of the WS103?
The range is up to 30 meters indoors, depending on building materials and obstructions.
Can I use multiple receivers with one transmitter?
Yes, you can pair multiple WS103 receivers with a single transmitter, as long as they are within range and programmed correctly.
What power supply does the WS103 require?
It operates on 230 V AC, 50/60 Hz. Do not use with DC power.
Is the WS103 waterproof?
No, it has an IP20 rating, meaning it is protected against dust but not water. Install indoors only.
How do I reset the WS103 to factory settings?
Press and hold the pairing button for 10 seconds. The LED will flash rapidly, indicating all pairings are cleared.
What is the load capacity of the receiver?
The relay can switch loads up to 10 A (resistive) or 2300 W. For inductive loads, reduce by 50%.
Can the WS103 be used with LED lights?
Yes, but ensure the total LED load does not exceed 200 W due to inrush current.
What does the LED indicator mean?
Solid LED: receiver is paired and ready. Flashing LED: pairing mode. Off: no power or fault.
How do I install the WS103?
Mount the receiver on a wall using screws, connect the power supply and load wires, then pair with a transmitter. Always disconnect power before installation.
User questions about WS103 Elektrobock
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual WS103 - Elektrobock and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WS103 by Elektrobock.