GS68-BJ - Steam cleaner SALAV - Free user manual and instructions

Product Type	Garment Steamer
Model	GS68-BJ
Water Tank Capacity	1.8 L
Steam Output Time	45–80 seconds
Input Voltage	110–120 V ~ 60 Hz
Output Power	1260–1500 W
Steam Settings	4 levels (for various fabric types)
Pole Type	Telescopic pole
Drain System	Drain plug for water reservoir
Usage Orientation	Vertical only; do not use horizontally or tilt backwards
Safety Features	Auto shut-off, cool-down period before draining, keep nozzle elevated
Maintenance	Regular descaling with vinegar solution; clean water recommended
Accessories Included	Steam nozzle, hose, telescopic pole, water tank cap, drain plug
Weight	Approximately 3.5 kg
Dimensions (Approx.)	Height: 150 cm, Base: 30 x 30 cm
Material	Plastic and metal components
Warranty	Standard SALAV warranty; see manual or website
Recommended Water	Distilled or filtered water
Not for Use	On people, animals, or flammable materials; indoor use only

Frequently Asked Questions - GS68-BJ SALAV

How long does it take for the steamer to produce steam?

The steam ready time is between 45 to 80 seconds, depending on the steam setting selected.

What type of water should I use?

Distilled or filtered water is strongly recommended to prevent mineral buildup and extend the life of the steamer.

Can I use the steamer horizontally?

No, the steamer must be used in a vertical position. Tilting it backwards or using it horizontally may cause hot water discharge and burns.

How do I drain the water reservoir?

Turn off and unplug the unit, let it cool for at least 30 minutes, then unscrew the drain plug and empty the reservoir. Always tighten the plug before next use.

How do I remove mineral buildup?

Mix a water and vinegar solution (e.g., 1:1 ratio) and pour it into the reservoir. Let it sit for 40 minutes, then drain and rinse with clean water. Screw the drain plug back securely.

Can I steam clothes while wearing them?

No, never direct steam at people or animals. Do not use the steamer on garments while they are being worn to avoid injury from hot steam.

What is the capacity of the water tank?

The water tank capacity is 1.8 liters.

What should I do if the steam output is weak?

Check water level, ensure the unit is turned on and at a high steam setting. If still weak, perform descaling with vinegar solution to remove mineral deposits.

Can I use extension cords?

It is recommended to plug the steamer directly into a wall outlet. Avoid using extension cords or sharing the outlet with other high-wattage appliances.

How do I store the steamer after use?

Turn off and unplug the unit, allow it to cool completely (at least 30 minutes). Drain the water tank and reservoir, collapse the telescopic pole, and store in a dry place.

USER MANUAL GS68-BJ SALAV

SALAV

U S E R

MANUAL

Please read all instruction carefully before using this product.

Garment Steamer

Model: GS65-BJ

www.salavusa.com

Dear Valued Customers

Thank you for purchasing this SALAV product. Please read this manual prior to using your SALAV appliance. For more product information, FAQ and customer support please visit our website at www.salavusa.com.

Important Safety Instructions:

1. The voltage of your electrical source must correspond to that of the appliance (110-120V\~60Hz). Connecting to the incorrect voltage may cause unrepairable damage to the appliance and will invalidate the warranty.
2. Do not share the power supply with other high-powered electric appliances.
3. To reduce the risk of electric shock, do not immerse the appliance, plug, or power cord in water or other liquids.
4. Do not leave this appliance unattended while it is in operation.
5. Fill in water before using and observe the water level during use.
6. Do not lay hose on the ground. Do not wind hose. Do not operate the appliance if cord is damaged.
7. Always keep the hose and nozzle elevated above the water tank. Never insert any object into any opening or hose.
8. Do not cut or attempt to extend the steam hose or power cord.
9. Do not place the nozzle directly on any surface or the appliance power cord while it is hot or plugged in.
10. Be cautious about steam spraying out from the nozzle. Do not direct steam at people or animals, or use steamer on garments while they are being worn.
11. Steam only in a vertical motion. Never use steamer in a horizontal position or tilt backwards - doing so may result in hot water discharge.
12. Move the appliance by firmly grasping the pole. Drain the water tank and water reservoir before moving.
13. Turn off, unplug and allow the appliance to cool completely for at least 30 minutes prior to draining the water tank and water reservoir and storing.
14. Always turn off and unplug unit before refilling, draining, cleaning, moving, or when not in use.
15. Use appliance only for its intended use. For indoor use only.
16. Keep the appliance away from flammable materials and chemicals.
17. Do not fill the water tank with hot water or corrosive cleaning agents which could cause damage. Distilled or filtered water is strongly recommended.
18. When in use, this appliance will spray hot steam from its steam nozzle. To avoid injury from hot steam, do not aim the steam nozzle at people or pets.
19. Only use SALAV accessories on your SALAV appliance. The use of accessory attachments other than those provided by SALAV may result in fire, electric shock or irreversible damage to the appliance.
20. This appliance is not intended for use by children or near children and other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.

Save the instructions for future reference

COMPONENTS

PRODUCT SPECIFICATION

Model

GS65-BJ

Water Tank Capacity

1.8L

Steam Output Time

45\~80 seconds

Input Voltage

110-120V \~ 60Hz

Output Power

1260 - 1500W

4 steam settings for various fabric types

SETTING UP YOUR GARMENT STEAMER

INSTRUCTIONS FOR USE

STEP 1

Remove the Cap. Fill the Water Tank. Replace & tighten the Cap.

STEP 2

Plug in &Turn on.

STEP 3

45-80 Seconds steam ready time depending on the steam setting.

STEP 4

Ready for garment steaming.

MAINTENANCE AND CLEANING

STEP 1

Turn off the unit and unplug it. Wait for at least 30 mins until the unit cools down completely.

STEP 2

Unscrew the Drain Plug and empty the water reservoir. Collapse and remove the Telescopic Pole & Steam Nozzle.

Attention: Tighten the Drain Plug back into place after water reservoir is emptied. Make sure Drain Plug is tightly secured each time before use

REMOVING MINERAL BUILD-UP

STEP 1

Turn off and unplug the unit and cool for at least 30 mins. Remove water tank. Mix water & vinegar solution and pour into water reservoir.

STEP 2

Wait for 40mins. Unscrew the Drain Plug and empty the water reservoir. Pour in clean water. After the water reservoir is empty, screw the Drain Plug.

ACCESSORIES ASSEMBLY AND USE

ACCESSORIES ASSEMBLY AND USE

STEAMING INSTRUCTION

TROUBLE SHOOTING

Visit our website to find product tips, customer support and learn about SALAV patented steam technology.

www.salavusa.com