Galileo Apnea - Dive computer UWATEC - Free user manual and instructions
Find the device manual for free Galileo Apnea UWATEC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dive Computer |
| Brand | Uwatec |
| Model | Galileo Apnea |
| Display | LCD with backlight |
| Dimensions | Approx. 80 x 60 x 30 mm |
| Weight | Approx. 100 g (incl. strap) |
| Battery | CR2032, user replaceable |
| Battery Life | Up to 2 years (typical use) |
| Depth Rating | 120 meters (400 feet) |
| Algorithms | Apnea mode with surface interval timer |
| Functions | Depth, time, temperature, ascent rate, no-deco limits, logbook |
| Logbook Capacity | 100 dives |
| Languages | English, German, French, etc. |
| Water Activation | Manual start |
| Strap | Included, adjustable |
| Warranty | 2 years |
| Maintenance | Rinse with fresh water after each use |
| Safety | Ascent rate warning, deep stop, audible alarms |
| Spare Parts | Battery, strap, o-rings (if applicable) |
| Reparability | Serviceable by authorized centers |
Frequently Asked Questions - Galileo Apnea UWATEC
How do I turn on the Galileo Apnea?
Press and hold the mode button for about 3 seconds until the display lights up. The computer will start in surface mode.
How do I switch to apnea mode?
From the main screen, press the mode button repeatedly until 'Apnea' appears on the display. Press select to confirm.
How to change the battery?
Open the battery compartment using a coin or tool. Replace the CR2032 battery with the positive side facing up. Ensure the O-ring is clean and lubricated before closing.
What does the ascent rate warning mean?
If you ascend faster than 10 meters per minute, the computer will sound an alarm and display 'SLOW'. Slow down your ascent to avoid decompression sickness.
How to reset the logbook?
Go to the settings menu and select 'Reset Logbook'. Confirm to erase all saved dive data. This action cannot be undone.
Can I use the computer for freediving?
Yes, the Galileo Apnea is designed for freediving and includes a dedicated apnea mode with surface interval timing.
How often should I service the computer?
UWATEC recommends annual service including battery replacement and pressure test. Send it to an authorized service center.
What to do if the screen freezes?
Try a hard reset by removing the battery for 30 seconds. If the problem persists, contact customer support.
How to adjust display brightness?
Enter the display settings menu and select 'Brightness'. Use the +/- buttons to adjust to your preference. Backlight is auto-off after 10 seconds.
How to clean after saltwater use?
Rinse the computer thoroughly with fresh water and dry with a soft cloth. Remove the strap and clean separately. Avoid using chemicals or abrasives.
User questions about Galileo Apnea UWATEC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dive computer in PDF format for free! Find your manual Galileo Apnea - UWATEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Galileo Apnea by UWATEC.
