Li-Polymer 12000 mAh - Power bank iGET - Free user manual and instructions

Product Type	Portable Power Bank / External Battery
Brand	iGET
Model	B-12000
Battery Type	Li-Polymer
Battery Capacity	12000 mAh
Input	Micro USB, DC 5V / 1A
Output	2 x USB: 5V / 2.1A and 5V / 2.2A
Charging Time	18 to 22 hours (with 5V/1A adapter)
Number of Charging Cycles	≥ 500
Protection Features	Short-circuit, overcharge, overdischarge, intelligent battery protection (B-12000), high efficiency conversion, auto-sleep
Operating Temperature	0°C to 40°C
Humidity	Max 85%
Compatible Devices	Smartphones, tablets, e-readers, GPS, MP3/MP4 players, game consoles (via USB)
Charging Indicator	4 LED lights showing battery level: 25%, 50%, 75%, 100%
Auto-Sleep	Yes (when no device connected)
Warranty	24 months
Package Contents	Power bank, micro USB cable, user manual
Cleaning	Wipe with a dry cloth; do not use liquids or alcohol
Compliance	CE, ROHS, Directive 2004/108/EC, 2011/65/EU

Frequently Asked Questions - Li-Polymer 12000 mAh iGET

How do I charge the power bank?

Connect the included micro USB cable to a standard USB charger (e.g., phone charger) or a computer USB port. Plug the micro USB end into the power bank's input port. The LEDs will flash during charging. When fully charged, all four LEDs remain lit. Charging may take 18-22 hours with a 5V/1A adapter.

How do I check the battery level?

Press the ON/OFF button for 5 seconds. The four LED indicators will light up to show the remaining capacity: 4 LEDs = 75-100%, 3 LEDs = 50-75%, 2 LEDs = 25-50%, 1 LED = less than 25%.

Can I charge my phone and tablet simultaneously?

Yes, the power bank has two USB output ports: one rated at 5V/2.1A and the other at 5V/2.2A. You can charge two devices at the same time, though total output may be limited.

What devices are compatible with this power bank?

It is compatible with most devices that charge via USB, including smartphones, tablets, e-book readers, GPS units, MP3/MP4 players, and portable game consoles. It supports Android, Windows Phone, and iOS devices.

How do I maintain the power bank for long life?

Keep the device between 10°C and 30°C for best performance. Fully recharge the battery at least once every three months if not in use. Clean the connectors with a dry cloth only. Avoid exposing to extreme temperatures, humidity, or direct sunlight.

What safety features does it have?

The power bank includes protection against short-circuit, overcharge, overdischarge, and intelligent battery management. It also has high conversion efficiency and an auto-sleep mode to conserve power when no device is connected.

How long does the battery last per charge?

The 12000 mAh capacity can fully charge a typical smartphone (3000 mAh battery) about 3-4 times, depending on efficiency. Actual performance may vary based on device and usage.

Can I use the power bank while it is charging?

No, the manual does not recommend using the power bank as a pass-through charger. It should be charged fully before use.

What should I do if the power bank gets hot?

If the device becomes excessively hot, stop using it immediately and allow it to cool down. Ensure it is not exposed to direct sunlight or covered during use. If overheating persists, contact customer support.

What is the warranty period?

The power bank has a warranty period of 24 months. For warranty claims, keep the original packaging with the serial number and proof of purchase. The battery capacity decrease due to normal wear is not covered.

USER MANUAL Li-Polymer 12000 mAh iGET

Symbol of a trash bin crossed with a diagonal line, representing no waste or discharge (no text or numbers present)

Figure 1 Adapter Charging

Figure 2 USB Charging

Figure 3 Charging Mobile phone

Symbol of a trash bin crossed with a diagonal line, representing no waste or discharge (no text or numbers present)

Figure 1 Adapter Charging

Figure 2 USB Charging

Figure 3 Charging Mobile phone

Symbol of a trash bin crossed with two crossed lines, representing no waste or discharge (no text or numbers present)

Figure 1 Adapter Charging

Figure 2 USB Charging

Figure 3 Charging Mobile phone

Thank you for purchasing of our Power bank iGET. Before using this product please read carefully this manual. Keep this manual for future use. Using the attached microUSB cable you can charge your mobile device and be available for longer period.

II. Safety precautions

Use the device only and exclusively in accordance with this manual. Failure to follow instructions can lead to fire or damages to the device.

1. For safety reasons protect the device from falling, shortage of electric circuits and high temperatures. If the device or battery suffers from distortion and cause damage to the device, stop using the device immediately.
2. Keep out of the reach of children. Only adult persons may use the device. Its owner is responsible for using of this device by other persons.

3. There is a battery inside the product. For safety reasons do not approach the product with metal objects, which could cause a short circuit.

4. The product must not be installed and used in hot (more than 40^ C) or cold (less than 0^ C) environment. At the same time the product must not be installed and used in humid (more than 85%) or dusty environment, or in the vicinity of fire.

5. Do not expose the product to direct sunlight and heat radiation and do not cover it, i.e. it must have a permanent supply of colder ambient air.

6. Do not expose the product to direct contact with liquids (water); do not use any corrosive cleaning agents for cleaning including alcohol. Use only a dry cloth.

7. The device must meet the requirements needed to use direct current; using a different power source may cause fire or malfunction.

8. A strong impact can lead to fire or explosion.

9. When using the product make sure that you have dry hands. Otherwise, it can cause damages to the product or electrical accident.

10. Set up the claim for warranty repair of device at your dealer. If you have technical questions or problems, contact your dealer.

11. For household use: The given symbol (crossed-out wheeled bin) on the product or at accompanying documents

means that used electrical and electronic products should not be disposed of with household waste. To ensure proper disposal of the product, hand it over to a designated collection point, where it will be accepted free of charge. The correct disposal of this product will help to save valuable natural resources and prevent any potential negative impacts on the environment and human health, which could otherwise be caused by inappropriate disposal of wastes. For more details, please, contact your local authorities or the nearest collection point. The improper disposal of this waste can be penalized in accordance with national regulations. Information for users to disposal of electrical and electronic devices (corporate and business use): For proper disposal of electrical and electronic devices, ask for details from your dealer or distributor. Information for users to disposal of electrical and electronic devices in other countries outside EU: The above mentioned symbol (crossed-out wheeled bin) is valid only in the countries of EU. For proper disposal of electrical and electronic devices, ask for details from your authorities or dealer. All is expressed by the symbol of crossed-out wheeled bin on product, packaging or in printed materials.

Symbol of a trash bin crossed with a diagonal line, representing no waste or discharge (no text or numbers present)

1. The battery life in device is 500 charging cycles. The loss of capacity caused by normal use does not give an entitlement to claim.

2. To make a claim it is necessary to know the serial number of product, indicated on the back side of product and the packaging box. Please, keep the box with serial number carefully for any complaints, you will avoid the unnecessary inconveniences or to be unable to establish a claim. Make a complaint of the product at your dealer, if not on website www.iget.eu stated otherwise.

III. Terms of use

1. Before commencing it is necessary to recharge the battery to the maximum. It can last 3 to 24 hours depending on the capacity and model. Then make a minimum 3 cycles of full charge and discharge. 2. For best results keep the device at temperatures between 10^ C to 30^ C.
2. If the device is not used for a long time, it loses its electrical properties. You must fully recharge the device at least once every three months.
3. The battery charge level decreases, even when it is not in use - it is a characteristic feature of the battery. If you want to use the battery again, recharge it to full state.
4. Keep the device clean. If the device or its connector is dirty, clean it with a dry cloth before use.

IV. Application of product

The product is compatible with mobile devices, equipped with microUSB connector. It is also possible to use other cable adapters with USB2.0 connector, as e.g. for tablets, mobile phones, e-book readers and other devices running on Android, Windows Phone, iOS systems. (Portable game consoles, MP3, MP4 music players, electronic e-book readers, GPS navigations).

Plug & play, automatic power safe mode - if no device consume energy; the Power bank shall go to sleep automatically. (Warning: Valid only for models with Auto-sleep function).

Power bank contains: protection against short-circuit, excessive battery charge and discharge, intelligent battery protection (only B-12000), high efficiency of conversion and protection against energy leakage.

If the voltage of Power bank battery is lower than the nominal voltage of charging device, this device may not be fully charged or not charged at all.

If the output voltage of Power bank battery is higher than the nominal voltage of charging device and for any reason it is impossible to protect the recharged device, it may result in overloading and damages to the battery or device itself.

V. Product description

1. On/OFF button.

1. Capacity indicator - pressing ON button for 5 seconds the LED indicator lights up showing the charge status.

Battery status:

LED indicator ( ● charged ○ discharged)	Capacity
●●●●	75%~100%
○●●●	50%~75%
○○●●	25%~50%
○○○●	Less than 25%

1. 1x or 2x (as per model) USB port for connection of charged device (model B2600 - 1x 5V/1A, model B-6600 - 1x 5V/1A and 1x 5V/2A and model B-12000 - 2x 5V/2.1A a 5V/2.2A)

2. microUSB port for charging via charger (DC5V/1A)

The packaging includes microUSB -> USB cable, Power bank and manual.

VI. Recharge of Power bank battery

1. Connect the standard USB -> microUSB cable to PC or USB adapter, e.g. supplied with mobile phone.
2. Connect microUSB connector to Power bank. The charging begins automatically or must be actuated using the ON/OFF button.
3. In the course of charging the battery starts flashing. When fully charged, the LEDs will stop flashing and all four LEDs will light. When the battery charging condition makes at least 25%, one LED only shall light, at 50% two LEDs and with at least 75% three LEDs will light.

Information about battery:

Model B-2600 - Li-ion (2 600mAh)

Model B-6600 - Li-ion (6 600mAh)

Model B-12000 - Li-Pol (12 000mAh)

Number of charging/discharging cycles - ≥ 500 times

Duration of charge - B -2600: 3 to 5 hours

B-6660: 9 to 12 hours

B-12000: 18 to 22 hours

- Duration of charge depends on used power supply adapter.

VII. Description of connection

Figure 1 Adapter Charging

Figure 2 USB Charging

Figure 3 Charging Mobile phone

VIII. Other information

Individual parameters, description by figures and design may differ depending on the version and updates. For exact parameters and other product information visit the website www.iget.eu. Printing errors reserved. The manufacturer and importer have no liability for data loss or other damages arising howsoever when using Power bank

Declaration of Conformity:

Company INTELEK spol. s.r.o. (Shenzhen Blue Times Technology Co., Ltd.) hereby declares that all B-12000 (LP-1009A) devices are in compliance with essential requirements and other relevant provisions of Directive 2004/108/EC. The products are intended for sale without limitation in the Czech Republic, Slovakia, Poland, Bulgaria, Germany, Austria, Belgium, Denmark, Finland, Greece, Netherlands Ireland, Great Britain, Norway, France, Spain, Italy, Hungary, Lithuania, Latvia, Estonia, Romania and other member countries of EU and in Russia. The warranty period of the product is 24 months, unless stated otherwise. The Declaration of Conformity can be downloaded from the website www.iget.eu.

ROHS

The components used in the device meet the requirements on the restriction of hazardous substances in electrical and electronic devices in accordance with Directive 2011/65/EU.

I. Увод

Symbol of a trash bin crossed with a diagonal line, representing no waste or discharge (no text or numbers present)

Figure 1 Adapter Charging

Figure 2 USB Charging

Figure 3 Charging Mobile phone

VIII. Други данни

Symbol of a trash bin crossed with a diagonal line, representing no waste or discharge (no text or numbers present)

Figure 1 Adapter Charging

Figure 2 USB Charging

Figure 3 Charging Mobile phone

Symbol of a trash bin crossed with a diagonal line, representing no waste or discharge (no text or numbers present)

Figure 1 Adapter Charging

Figure 2 USB Charging

Figure 3 Charging Mobile phone

Symbol of a trash bin crossed with two diagonal lines, representing no waste or discharge (no text or numbers present)

Figure 1 Adapter Charging

Figure 2 USB Charging

Figure 3 Charging Mobile phone

VIII. Kita informacija

Figure 1 Adapter Charging

Figure 2 USB Charging

Figure 3 Charging Mobile phone

Simple line drawing of a rectangular frame with four vertical bars and a small oval at the bottom (no text or symbols)

Figure 1 Adapter Charging

Figure 2 USB Charging

Figure 3 Charging Mobile phone

Serial / Batch number: (S/N)

Date of sale:

Warranty until:

Sale document number:

Seal of the store:

Information for Customers about Warranty Terms and Conditions:

Warranty shall apply to defects of purchased product, found during its warranty period.

When purchasing a particular product, please consider carefully what properties and functions you expect your product to have.

The fact that purchased product shall not satisfy your later requirements shall not give any reason for complaint. Please, prior to the first use of this product read carefully its operating instructions and follow these instructions consistently.

We recommend you to keep original product packing during the warranty period for possible transport of the product in such a way so as to prevent any product damage during its transport and handling.

For the purpose of due application of any complaint about the product we recommend you to ask Seller to fill-in and confirm this Warranty Card including identification of serial number of purchased product, which shall comply with the serial number specified both in the document proving product purchase and delivery note and purchased product.

In this connection Customer hereby takes into account that unless this Warranty Card specifies serial number of purchased product, i.e., comparison of such serial number identified in the product with the serial number identified in this Warranty Card and document of product purchase/or delivery note shall not allow to confirm that particular product has come from Seller, in case of any doubts about the origin of such particular product Seller shall be entitled to automatically and without any other acts to reject the complaint of such goods.

Warranty shall not apply to:

• product damage suffered by unqualified installation of firmware or its modification;
• product damage by static electricity;
• product use for any other purposes than designed, described in attached operating instructions;
• damage to warranty seal of the producer, attached to the product;
• product damage inconsistent with the operating instructions, technical standards or safety regulations valid in the Czech Republic;
• product damage resulting from normal wear and tear;
• discharged batteries, decrease in battery capacity caused by its wear and tear;
• product defects caused by the use in dusty, polluted or in any other way dissatisfactory environment pursuant to attached operating instructions.

Wear and tear of the product and its components caused by their common use (discharged batteries, decreased capacity of accumulator, wear and tear of mechanical or displaying components, wear and tear of supply cables, headphones etc.) shall be subject neither to defect warranty nor quality warranty in the moment of take-over.

Furthermore, complaints about product parameters, not included in the operating instructions or in any commercial-technical documentation of Seller, related to the product, shall not be subject to quality warranty in the moment of take-over.

Proof of product purchase, or delivery note, shall constitute an integral part of this Warranty Card.