RS 300 - Vacuum Cleaner Raycop - Free user manual and instructions
Find the device manual for free RS 300 Raycop in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | UVC vacuum cleaner with sanitization |
| Brand | Raycop |
| Model | RS 300 |
| Dimensions (L x W x H) | Approx. 28 x 12 x 23 cm |
| Weight | Approx. 1.5 kg |
| Power supply | 100-240 V, 50/60 Hz |
| Rated power | 600 W |
| Suction power | 100 W (air watts) |
| Dust capacity | 0.5 L |
| Filtration system | HEPA filter + washable pre-filter |
| UV sterilization | UVC lamp (253.7 nm) |
| UV lamp life | Approx. 3,000 hours |
| Noise level | ≤ 78 dB(A) |
| Cord length | 5 m |
| Operating radius | 8 m |
| Washable parts | Pre-filter, dust cup, HEPA filter (depending on model) |
| Filter maintenance | Clean pre-filter monthly, replace HEPA every 6 months |
| Replacement parts | UV lamp, HEPA filter, pre-filter available |
| Safety features | Auto shut-off when tilted >45°, UV cut-off if not in contact with surface |
| Certifications | CE, RoHS |
| Intended use | Household use: mattresses, sofas, carpets, hard floors |
Frequently Asked Questions - RS 300 Raycop
How does the UV sterilization work?
The UVC lamp emits ultraviolet light at 253.7 nm, which destroys the DNA of bacteria, dust mites, and viruses. It activates only when the device is in contact with the surface for safety.
Is the UV lamp safe for my skin and eyes?
Yes. The UV lamp automatically turns off when the vacuum is lifted or tilted more than 45°. Do not look directly at the lit lamp.
How often should I clean or replace the filters?
Clean the pre-filter every month with water. Replace the HEPA filter every 6 months or when visibly dirty. The UV lamp lasts about 3,000 hours.
Can I use the RS 300 on all types of floors?
Yes. It works on carpets, rugs, hard floors, mattresses, and upholstery. Adjust the suction for different surfaces (if applicable).
What does the UV indicator mean?
A blue or green light indicates the UV lamp is active. A red light or no light may mean the lamp needs replacement or the unit is tilted improperly.
How do I empty the dust cup?
Press the release button to remove the dust cup. Empty it over a trash bin. Rinse the cup with water and let it dry completely before reinserting.
Why does the vacuum turn off while using?
Possible causes: the UV lamp is overheating (cool down), the filter is clogged (clean it), or the unit is tilted too much (place flat).
Can I wash the HEPA filter?
No. The HEPA filter is not washable. Tap it gently to remove dust. Replace it every 6 months or as needed.
Where can I buy replacement parts?
Replacement UV lamps, HEPA filters, and pre-filters are available on the Raycop website or authorized distributors.
Is the RS 300 suitable for allergy sufferers?
Yes. The combination of suction, vibration (dunno?), and UV sterilization removes allergens, dust mites, and bacteria. The HEPA filter traps fine particles.
User questions about RS 300 Raycop
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual RS 300 - Raycop and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RS 300 by Raycop.