MR-DH00 - Air-conditioner SAMSUNG - Free user manual and instructions
Find the device manual for free MR-DH00 SAMSUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air Conditioner |
| Brand | Samsung |
| Model | MR-DH00 |
| Cooling Capacity (BTU/h) | 9,000 |
| Heating Capacity (BTU/h) | 9,000 (heat pump model) |
| Energy Efficiency Ratio (EER) | 11.5 |
| Power Supply (V/Hz) | 115/60 |
| Rated Power Consumption (Cooling, W) | 900 |
| Rated Power Consumption (Heating, W) | 950 |
| Recommended Room Size (sq ft) | up to 400 |
| Compressor Type | Rotary |
| Refrigerant | R-410A |
| Airflow (CFM) | 350 |
| Noise Level (Indoor Unit, dBA) | 42 (low), 48 (high) |
| Noise Level (Outdoor Unit, dBA) | 52 |
| Dimensions (Indoor Unit, WxDxH, inches) | 32.0 x 7.5 x 11.0 |
| Dimensions (Outdoor Unit, WxDxH, inches) | 28.0 x 11.0 x 20.0 |
| Weight (Indoor Unit, lbs) | 22 |
| Weight (Outdoor Unit, lbs) | 65 |
| Remote Control | Yes (included) |
| Timer | 24-hour on/off timer |
| Sleep Mode | Yes |
| Auto Swing | Up/Down |
| Filter Type | Washable, anti-bacterial |
| Maintenance | Clean filter every 2 weeks; annual professional check |
Frequently Asked Questions - MR-DH00 SAMSUNG
How do I clean the air filter on the Samsung MR-DH00?
Turn off the unit and unplug it. Open the front panel, remove the filter, and rinse with warm water. Let it dry completely before reinstalling. Clean every 2 weeks for best performance.
What does the error code 'E1' mean on the display?
Error code E1 indicates a communication error between the indoor and outdoor units. Check connections and restart the unit. If it persists, contact a technician.
Can I use the air conditioner without the remote control?
Yes, the MR-DH00 has a manual control button on the indoor unit for basic on/off and mode selection. However, full features require the remote.
How do I set the timer to turn off automatically?
Press the Timer button on the remote until the OFF indicator blinks. Use +/- to set the desired hours (1-24). Press Timer again to confirm. The unit will turn off after the set time.
Why is the air conditioner blowing warm air?
Check if the unit is in fan-only mode or if the thermostat is set too high. Also ensure the outdoor unit is not blocked or covered. If the issue persists, the refrigerant may be low.
What is the recommended room size for the MR-DH00?
The MR-DH00 is designed for rooms up to 400 square feet (approximately 37 square meters) with an 8-foot ceiling.
How do I enable sleep mode?
On the remote control, press the Sleep button. The unit will gradually adjust the temperature (usually increase by 1°C per hour) for comfortable sleep. It can be combined with the timer.
Does the MR-DH00 have a heater?
Yes, this model is a heat pump, so it can provide both cooling and heating. Use the remote to switch between Cool, Heat, and Auto modes.
Where can I download the full user manual?
Visit the Samsung support website and search for model MR-DH00. You can download the PDF manual from the product page or the documentation section.
How do I reset the air conditioner to factory settings?
Unplug the unit for 10 minutes, then plug it back in. Alternatively, find the reset hole (usually inside the battery compartment of the remote) and press with a pin for 3 seconds.
User questions about MR-DH00 SAMSUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual MR-DH00 - SAMSUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MR-DH00 by SAMSUNG.