CI-650 - Headphones Connect IT - Free user manual and instructions

Brand	Connect IT
Model	CI-650 (also CI-1068)
Product Type	Bluetooth In-Ear Headphones with Microphone
Weight	15 g
Battery Type	Lithium-Polymer 60 mAh
Charging Time	Approx. 1.5 hours
Playback Time	Up to 5 hours
Talk Time	Up to 5 hours
Standby Time	Up to 15 days
Bluetooth Version	4.1
Bluetooth Profiles	A2DP, AVRCP, HSP, HFP
Wireless Range	Up to 10 m
Frequency Response	20 Hz – 22 kHz
Impedance	16 Ohm
Sensitivity	96 ± 3 dB
Driver Unit	Not specified
Microphone	Built-in
Controls	Volume, track, call control via remote
Package Contents	Headphones, 3 pairs of ear tips, microUSB cable, manual
Charging Port	Micro USB
Cleaning	Wipe with a soft, dry cloth. Do not use liquids.

Frequently Asked Questions - CI-650 Connect IT

How do I charge the CI-650 headphones?

Ensure the headphones are turned off. Connect the microUSB cable to the headphones and a USB power source. The red LED indicates charging and turns off when fully charged. Charging takes approximately 1.5 hours.

How do I turn the headphones on and off?

Press and hold the power button. A voice prompt and flashing blue LED indicate power on. For power off, hold the power button again; a voice prompt and red LED confirm shutdown.

How do I pair the headphones with my device?

With the headphones off, press and hold the power button until the LED flashes red and blue (pairing mode). Search for BTE03 in your device's Bluetooth settings and select it. If asked for a PIN, enter 0000. Successful pairing is indicated by a blue flashing LED.

How do I answer or reject a call?

Press the power button once to answer a call. Press it twice to reject an incoming call. To end a call, press the power button once.

How do I control music playback?

To play or pause music, press the power button in standby mode. To skip to the next track, hold the ▶+ button. To go to the previous track, hold the ◀- button.

How do I adjust the volume?

Press the +▶ button to increase volume and the -◀ button to decrease volume.

What is the battery life and standby time?

The headphones provide up to 5 hours of playback or talk time, and up to 15 days in standby mode. Full charge takes about 1.5 hours.

What is the wireless range of the CI-650?

The Bluetooth range is up to 10 meters (33 feet) in open space. Walls and obstructions may reduce the range.

Can I use the headphones while charging?

It is recommended to not use the headphones while charging to ensure safety and battery longevity. Always charge with the device turned off.

How do I reset or recover connection if pairing fails?

If pairing fails or times out, turn off the headphones and repeat the pairing process. Ensure Bluetooth is enabled on your device and that the headphones are in pairing mode (LED flashing red/blue). You may need to forget the device on your phone and redo pairing.

USER MANUAL CI-650 Connect IT

USER MANUAL BENUTZERHANDBUCH UŽIVATELSKÝ MANUAL UŽÍVATELSKÝ MANUAL

BLUETOOTH EARPHONES BTE03 BLUETOOH KOPFHÖRER BTE03 BLUETOOTH SLUCHÁTKA BTE03 BLUETOOTH SLÚCHADLÁ BTE03

CI-650/CI-1068

Before putting this product into operation, please read carefully all the instructions, even if you are already familiar with using similar products. Use the product only as described in this manual. Keep this manual in case you need it for future reference.

The electronic version of this user manual can be downloaded on the website www.connectit-europe.com.

We recommend keeping the original packaging of the product, invoice and warranty certificate at least for the time the warranty is valid. When shipping the product, we recommend using the original packaging that the product was delivered in that will provide the best protection for it from being damaged during transport.

1 Specification

■ Control volume, playlist and phone calls using remote control
■ Built-in microphone for phone calls
■ Bluetooth 4.1 supports A2DP, AVRCP, HSP, HFP
■ Range: up to 10 m
■ Frequency response: 20 Hz - 22 kHz
■ Impedance: 16 Ohm
■ Sensitivity: 96±3dB
■ 60 mAh Li-Pol battery
■ Playback time: up to 5 hours
■ Call time: up to 5 hours
■ Charging time: approx. 1.5 hour
■ Standby mode: up to 15 days
■ Weight: 15 g

Package contents

■ Bluetooth Earphones BTE03
■ 3 pairs of in-ear plugs
■ microUSB cable
■ Manual

2 Instructions

Charging

1. Make sure that the headphones are turned off before charging.
2. To charge the headphones, connect the microUSB cable. While the headphones are being charged, red diode will be lit up.
3. Charging from fully discharged battery to fully charged takes approx. 1.5 hours. After being fully charged, the red diode will turn off.

Turning on

Hold the power button. Turning on will be signalized by voice playing from the headphones and blue flashing diode.

Turning off

Hold the power button. Turning off will be signalized by voice playing from the headphones and red flashing diode.

Pairing

1. When turning on the headphones, hold the power button until the diode starts flashing red and blue. Turning on the pairing mode will also be signalized by voice playing from the headphones.
2. Search for the bluetooth headphones on your device. The headphones will show up under the name BTE03.
3. Choose the headphones for pairing. Successful pairing will be signalized by blue flashing diode. If you are prompted for a passkey, enter 0000.
4. If the pairing fails or the time for pairing runs out, try to repeat the process.

Note: When turned off, to recover the connection, turn the headphones on. Make sure that the bluetooth is enabled on your device.

Answering phone call

Press the power button. Incoming call will be signalized by ringtone and by voice.

Rejecting phone call

Press the power button twice.

Hanging up phone call

Press the power button.

Re-dialing

Press the power button twice in standby mode.

Music playback

Press the power button in standby mode.

Next or previous track

Hold the +▶ button or the -◀ button to change the sound track.

Volume control

Press the +▶ button or the -◀ button to change the volume.

Note: The support of functions mentioned in this manual depends on the device the headphones are paired with.

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING

Dispose of packaging material at a public waste disposal site.

EN

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES

The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product. The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.

For business entities in the European Union

If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.

Disposal in other countries outside the European Union

If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller.

This product meets all the basic EU regulation requirements that relate to it. EC declaration of conformity is available on www.connectit-europe.com.

EC Declaration of Conformity

IT TRADE, a.s.

CONNECT IT Bluetooth earphones with microphone BTE03

We hereby declare that the product satisfies all the technical regulations applicable to the product within the scope of EC Council Directive of 2004/108/EC & 2006/95/EC, R&TTE Directive 1999/5/EC:

Model Number: CI-650/CI-1068

Brandname: CONNECT IT

Test Standard:

EN 300 328 V1.9.1 (2015-02)

EN 301 489-1 V1.9.2 (2011-09)

EN 301-489-17 V2.2.1 (2012-09)

EN 62479:2010

EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013

Reference: Certificate Number SEM15097512 of model BTE03

This declaration is issued under the sole responsibility of the manufacturer and, if applicable, his authorized representative.

IT TRADE a.s.

Manufacturer

Karel Fiala

Responsible person

Statutory director

Position

connect

MANUFACTURER

HERSTELLER

VÝROBCE

VÝROBCA

IT TRADE, a.s.

Štěrboholská 184/28

102 00 Praha 10

Czech Republic

tel.: [phone]

[e-mail]

www.connectit-europe.com