SC-EK18P26 - Kettle Scarlett - Free user manual and instructions

Product Type	Kettle
Brand	Scarlett
Model	SC-EK18P26
Capacity	1.7 L (max)
Minimum Water Level	0.5 L
Color	Black and Maroon
Housing Material	Plastic
Base	With cord storage compartment
Water Level Indicator	Yes
Indicator Light	Yes (illuminates when heating)
Automatic Shut-off	Yes (when water boils)
Dry Boil Protection	Yes (automatic switch-off)
Removable Filter	Yes (for scale)
Lid Release Button	Yes
Spout	Yes
Handle	Yes
Usage	For heating water only
Cleaning	Wipe exterior with damp cloth; descale regularly
Filter Cleaning	Remove and rinse under water, brush gently
Storage	Dry cool place after cleaning

Frequently Asked Questions - SC-EK18P26 Scarlett

How should I use the kettle for the first time?

Fill the kettle with cool water up to the maximum level mark, boil it, then empty. Repeat this operation twice to remove any residue. The appliance is then ready for use.

How do I fill the kettle properly?

You can fill the kettle via the spout or through the neck with the lid open. Ensure the water level is between the MIN (0.5 L) and MAX (1.7 L) marks to avoid dry operation or overflowing.

Can I open the lid while the water is boiling?

No. Do not open the lid while water is boiling as it may cause burns or scalding. Always wait until the kettle has finished boiling and switched off automatically.

What happens if the kettle boils dry accidentally?

The kettle has a safety system that automatically switches off the heating element if operated dry or empty. Let the appliance cool down for 10 minutes before refilling with water.

How do I clean the removable filter?

Remove the filter from the kettle. Rinse it under a jet of water and gently rub with a soft brush (not included). Then reinstall the filter back into place.

How can I descale the kettle?

Use special descaling agents available in the market. Follow the instructions provided with the descaler. Descale regularly to maintain performance.

Why does the kettle turn off before the water boils?

This may happen if the kettle has boiled dry or if the safety system has been triggered. Ensure there is enough water (above MIN). Also, check if the lid is properly closed to allow automatic shut-off.

Can I use the kettle for other liquids like milk or soup?

No. The kettle is designed for heating water only. Using it for other liquids may damage the appliance or cause a safety hazard.

How do I store the kettle when not in use?

Clean the kettle and base as per the cleaning instructions. Store in a dry, cool place away from direct sunlight and moisture.

What should I do if the power cord is damaged?

Do not operate the appliance if the cord or plug is damaged. Take it to a qualified specialist for check and repair. Do not attempt to repair it yourself.

USER MANUAL SC-EK18P26 Scarlett

Black and maroon SCARLETT brand water heater with visible branding and control buttons (no text or symbols on body)

www.scarlett.ru

GB DESCRIPTION

1. Base unit with cord storage compartment
2. Body
3. Spout
4. Removable filter
5. Lid
6. Lid release button
7. On/Off switch
8. Indicator light
9. Handle
10. Water level indicator

CZ POPIS

GB INSTRUCTION MANUAL IMPORTANT SAFEGUARDS

- Please read these operating instructions carefully before connecting your kettle to the power supply, in order to avoid damage due to incorrect use.

- Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.

- Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.

- For home use only. Do not use for industrial purposes.

- Always unplug the appliance from the power supply when not in use.

- Keep the base unit away from water and protect from splashes.

- Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall socket immediately and have the unit checked by an expert before using it again.

- Do not operate the appliance if the cord or the plug is damaged or if the appliance has been otherwise damaged. In such cases take the appliance to a qualified specialist for check and repair if necessary.

- Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.

- To disconnect the appliance from the power supply pull it out by the plug only, not by the cord.

- Place the appliance on a dry stable surface, away from sources of heat (e.g. hotplates); do not place it under curtains and shelves.

- Do not leave the appliance unattended when in use.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes.

- Never take the kettle from its base while in operation. Switch the appliance off first.

- ATTENTION: Do not open the lid while water is boiling.

- Close the lid properly before switching on. Otherwise, the appliance will not switch off automatically and the hot water may overflow.

- The kettle is for heating water only, not for any other purposes and liquids.

- Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.

- If the product has been exposed to temperatures below 0^ for some time it should be kept at room temperature for at least 2 hours before turning it on

- The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

BEFORE USING FOR THE FIRST TIME

- Fill the kettle with cool water up to the maximum level mark and boil it. Empty the kettle. Repeat this operation. The appliance is ready for use.

INSTRUCTION FOR USE

FILLING

- You can fill the kettle with water via the spout or neck with opened lid.

- Do not fill the kettle with less than 0.5 l of water (less than “MIN” mark) to prevent it from operating dry and more than 1.7 l (up to “MAX” mark) to avoid overfilling and water spilling out during the boiling.

SWITCHING ON

- After filling with water, place the kettle on the base unit.

- Connect the plug to the power supply and push On/Off switch. The appliance will turn on and the indicator will light.

SWITCHING OFF

- When water begins to boil, the kettle will switch off automatically and indicator light will go off.

- NOTE: This appliance has a safety system, which automatically switches heating element off if the appliance inadvertently has been switched on when empty, or if it operates dry. In this case let the appliance cool down for 10 minutes before filling with water again.

SWITCHING ON AGAIN

- If the kettle has been switched off automatically, it can be switched on again after cooling for 15-20 seconds.

CARE AND CLEANING

- Always remove the plug from the socket and let the appliance cool down completely.

- Clean the outside of the kettle and the base unit with a soft damp cloth, then wipe with a dry cloth. Do not use any abrasive materials.

- Remove scale regularly, using special descaling agents, available at the market, following given instructions.

FILTER CLEANING

- Remove the filter out of the kettle.

- Place it under a jet of water and rub gently with a soft brush (not included).

- Return the filter to its place.

STORAGE

- Complete all requirements of Chapter CLEANING AND CARE.

- Keep the appliance in a dry cool place.