SC-EK18P21 - Kettle Scarlett - Free user manual and instructions

Product Type	Electric Kettle
Brand	Scarlett
Model	SC-EK18P21
Material	Ceramic body
Capacity	1.7 L (maximum), 0.5 L (minimum)
Power	Approx. 2200 W
Voltage	220–240 V
Frequency	50/60 Hz
Auto Shut-Off	Yes, when water boils or kettle is empty
Boil-Dry Protection	Yes
Removable Filter	Yes, for easy cleaning
Water Level Indicators	Two indicators with engraved min and max marks
Base Unit	With cord storage compartment
Lid Operation	Push-button release
On/Off Switch	Yes, with indicator light
Dimensions (approx.)	25 x 20 x 25 cm
Weight (approx.)	1 kg
Cord Length (approx.)	0.8 m
Color	Black
Repairability	Not user-serviceable; contact service center

Frequently Asked Questions - SC-EK18P21 Scarlett

How do I descale my Scarlett kettle?

Use a special descaling agent available in stores. Fill the kettle with water and descaling agent according to the product instructions, boil, then empty and rinse thoroughly. Regular descaling prevents scale buildup and extends the kettle's life.

How do I clean the removable filter?

Remove the filter from the kettle. Rinse it under running water and gently rub with a soft brush. Do not use abrasive materials. Reinsert the filter after drying. This helps maintain water flow and performance.

What is the maximum water capacity?

The maximum capacity is 1.7 liters (indicated by the 'MAX' mark). Do not overfill to avoid water spilling during boiling. The minimum is 0.5 liters ('MIN' mark) to prevent dry operation.

Does the kettle have auto shut-off?

Yes, the kettle automatically switches off when the water reaches boiling point. It also has boil-dry protection that turns it off if accidentally switched on empty. The indicator light will go off when it shuts down.

Why does the kettle turn off before the water boils?

This may be due to the boil-dry protection activating if there is insufficient water (below MIN level). Also, if the kettle is still hot from previous use, it may need 15–20 seconds to reset. Ensure you fill between MIN and MAX marks.

What does the indicator light mean?

The indicator light turns on when the kettle is switched on and heating. It turns off automatically when the water boils or the kettle shuts off due to safety features. It helps you know when the kettle is operating.

Can I use the kettle for heating other liquids?

No, the kettle is designed only for heating water. Using it for other liquids like milk, oil, or soup can damage the appliance and cause safety hazards. Follow the intended use.

How to prepare the kettle for first use?

Fill the kettle with cool water up to the MAX mark, boil it, then discard the water. Repeat this process once. This removes any manufacturing residues and prepares the kettle for regular use.

Why is the kettle not turning on?

Check that the kettle is properly placed on the base unit and the plug is connected. If the boil-dry protection has activated (e.g., if it was switched on empty), let it cool for 10 minutes before refilling and attempting again. Also ensure the power supply works.

How should I store the kettle when not in use?

Clean the kettle and base unit according to the care instructions. Allow all parts to dry completely. Store in a dry, cool place away from heat sources. Wrap the cord in the base compartment for neat storage.

USER MANUAL SC-EK18P21 Scarlett

Black ceramic kettle with engraved maximum price and minimum price markings (no visible text beyond labels)

www.scarlett.ru

GB DESCRIPTION

1. Base unit with cord storage compartment
2. Body
3. Spout
4. Removable filter
5. Lid
6. Lid release button
7. On/Off switch
8. Indicator light
9. Handle
10. Two water level indicators

CZ POPIS

• Please read these operating instructions carefully before connecting your kettle to the power supply, in order to avoid damage due to incorrect use.
• Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.
• Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
• For home use only. Do not use for industrial purposes.
• Always unplug the appliance from the power supply when not in use.
• Keep the base unit away from water and protect from splashes.
• Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall socket immediately and have the unit checked by an expert before using it again.
• Do not operate the appliance if the cord or the plug is damaged or if the appliance has been otherwise damaged. In such cases take the appliance to a qualified specialist for check and repair if necessary.
• Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.
• To disconnect the appliance from the power supply pull it out by the plug only, not by the cord.
• Place the appliance on a dry stable surface, away from sources of heat (e.g. hotplates); do not place it under curtains and shelves.
• Do not leave the appliance unattended when in use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes.
• Never take the kettle from its base while in operation. Switch the appliance off first.
• ATTENTION: Do not open the lid while water is boiling.
• Close the lid properly before switching on. Otherwise, the appliance will not switch off automatically and the hot water may overflow.
• The kettle is for heating water only, not for any other purposes and liquids.
• Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
• If the product has been exposed to temperatures below 0^ for some time it should be kept at room temperature for at least 2 hours before turning it on
• The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

BEFORE USING FOR THE FIRST TIME

- Fill the kettle with cool water up to the maximum level mark and boil it. Empty the kettle. Repeat this operation. The appliance is ready for use.

INSTRUCTION FOR USE

FILLING

• You can fill the kettle with water via the spout or neck with opened lid.
• Do not fill the kettle with less than 0.5 l of water (less than “MIN” mark) to prevent it from operating dry and more than 1.7 l (up to “MAX” mark) to avoid overfilling and water spilling out during the boiling.

SWITCHING ON

• After filling with water, place the kettle on the base unit.
• Connect the plug to the power supply and push On/Off switch. The appliance will turn on and the indicator will light.

SWITCHING OFF

• When water begins to boil, the kettle will switch off automatically and indicator light will go off.
• NOTE: This appliance has a safety system, which automatically switches heating element off if the appliance inadvertently has been switched on when empty, or if it operates dry. In this case let the appliance cool down for 10 minutes before filling with water again.

SWITCHING ON AGAIN

- If the kettle has been switched off automatically, it can be switched on again after cooling for 15-20 seconds.

CARE AND CLEANING

• Always remove the plug from the socket and let the appliance cool down completely.
• Clean the outside of the kettle and the base unit with a soft damp cloth, then wipe with a dry cloth. Do not use any abrasive materials.
• Remove scale regularly, using special descaling agents, available at the market, following given instructions.

FILTER CLEANING

• Remove the filter out of the kettle.
• Place it under a jet of water and rub gently with a soft brush (not included).
• Return the filter to its place.

STORAGE

• Complete all requirements of Chapter CLEANING AND CARE.
• Keep the appliance in a dry cool place.