SC-EK18P09 - Kettle Scarlett - Free user manual and instructions

Product Type	Electric Kettle
Model	SC-EK18P09
Brand	Scarlett
Capacity	1.7 L
Power	2200 W
Voltage	220-240 V
Frequency	50/60 Hz
Housing Material	Stainless Steel
Heating Element	Concealed
Auto Shut-Off	Yes
Boil-Dry Protection	Yes
Cordless Base	Yes, 360° rotational
Filter	Removable and washable limescale filter
Lid Type	Flip-top with one-button opening
Water Level Indicator	Yes
Dimensions (W x H x D)	22 x 24 x 16 cm
Weight	1.2 kg
Cord Length	70 cm
Cleaning	Descale regularly with vinegar or citric acid
Safety	Thermal cut-off, cool-touch handle

Frequently Asked Questions - SC-EK18P09 Scarlett

What is the capacity of the Scarlett SC-EK18P09 kettle?

The kettle has a capacity of 1.7 liters, suitable for boiling up to 7 cups of water.

Does the kettle have an automatic shut-off feature?

Yes, the SC-EK18P09 is equipped with auto shut-off that activates once the water reaches boiling point.

Is there boil-dry protection?

Yes, the kettle has boil-dry protection that automatically turns it off if it is switched on without water.

What material is the kettle made of?

The kettle body is made of stainless steel, while the handle and lid are made of heat-resistant plastic.

Is the kettle cordless?

Yes, it has a 360° rotational base for easy cordless pouring.

How do I clean the limescale filter?

The removable limescale filter can be taken out and rinsed under running water or cleaned with a soft brush.

How do I descale the kettle?

Regularly descale by boiling a mixture of water and vinegar (or citric acid) and leaving it for 15 minutes, then rinse thoroughly.

What is the power consumption?

The kettle operates at 2200 watts for fast boiling.

Can I boil less than the maximum capacity?

Yes, the water level indicator allows you to boil as little as 0.5 liters.

Is the kettle suitable for all stovetops?

No, this is an electric kettle designed for use on its power base, not on a stove.

USER MANUAL SC-EK18P09 Scarlett

Line drawing of a white SCARLETT water heater with handle and front panel (no text or symbols on body)

www.scarlett.ru

GB DESCRIPTION

1. Base unit with cord storage compartment
2. Body
3. Spout
4. Removable filter
5. Lid
6. Lid release button
7. On/Off switch
8. Indicator light
9. Handle
10. Two water level indicators

CZ POPIS

GB INSTRUCTION MANUAL IMPORTANT SAFEGUARDS

- Please read these operating instructions carefully before connecting your kettle to the power supply, in order to avoid damage due to incorrect use.

- Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.

- Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.

- For home use only. Do not use for industrial purposes.

- Always unplug the appliance from the power supply when not in use.

- Keep the base unit away from water and protect from splashes.

- Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall socket immediately and have the unit checked by an expert before using it again.

- Do not operate the appliance if the cord or the plug is damaged or if the appliance has been otherwise damaged. In such cases take the appliance to a qualified specialist for check and repair if necessary.

- Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.

- To disconnect the appliance from the power supply pull it out by the plug only, not by the cord.

- Place the appliance on a dry stable surface, away from sources of heat (e.g. hotplates); do not place it under curtains and shelves.

- Do not leave the appliance unattended when in use.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes.

- Never take the kettle from its base while in operation. Switch the appliance off first.

- ATTENTION: Do not open the lid while water is boiling.

- Close the lid properly before switching on. Otherwise, the appliance will not switch off automatically and the hot water may overflow.

- The kettle is for heating water only, not for any other purposes and liquids.

- If the product has been exposed to temperatures below 0^ for some time it should be kept at room temperature for at least 2 hours before turning it on

- The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

BEFORE USING FOR THE FIRST TIME

- Fill the kettle with cool water up to the maximum level mark and boil it. Empty the kettle. Repeat this operation. The appliance is ready for use.

INSTRUCTION FOR USE FILLING

• You can fill the kettle with water via the spout or neck with opened lid.
• Do not fill the kettle with less than 0.5 l of water (less than "MIN" mark) to prevent it from operating dry and more than 1.7 l (up to "MAX" mark) to avoid overfilling and water spilling out during the boiling.

SWITCHING ON

• After filling with water, place the kettle on the base unit.
• Connect the plug to the power supply and push On/Off switch. The appliance will turn on and the indicator will light.

SWITCHING OFF

• When water begins to boil, the kettle will switch off automatically and indicator light will go off.
• NOTE: This appliance has a safety system, which automatically switches heating element off if the appliance inadvertently has been switched on when empty, or if it operates dry. In this case let the appliance cool down for 10 minutes before filling with water again.

SWITCHING ON AGAIN

- If the kettle has been switched off automatically, it can be switched on again after cooling for 15-20 seconds.

CARE AND CLEANING

• Always remove the plug from the socket and let the appliance cool down completely.
• Clean the outside of the kettle and the base unit with a soft damp cloth, then wipe with a dry cloth. Do not use any abrasive materials.
• Remove scale regularly, using special descaling agents, available at the market, following given instructions.

FILTER CLEANING

• Remove the filter out of the kettle.
• Place it under a jet of water and rub gently with a soft brush (not included).
• Return the filter to its place.

STORAGE

• Complete all requirements of Chapter CLEANING AND CARE.
• Keep the appliance in a dry cool place.