UAP-AC-PRO-5 - Access Point Ubiquiti Networks - Free user manual and instructions
Find the device manual for free UAP-AC-PRO-5 Ubiquiti Networks in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Point |
| Brand | Ubiquiti Networks |
| Model | UAP-AC-PRO-5 |
| Wi-Fi Standard | 802.11ac (Wi-Fi 5) |
| Frequency Bands | 2.4 GHz (450 Mbps) & 5 GHz (1.3 Gbps) |
| Ethernet Ports | 1x 10/100/1000 Mbps |
| Power Method | Power over Ethernet (802.3af/at) |
| Power Supply | PoE Injector (included per unit) |
| Dimensions (without mount) | 196.7 x 196.7 x 35 mm |
| Weight | 300 g |
| Mounting | Ceiling or wall (bracket included) |
| Operating Temperature | -10°C to 70°C |
| Security | WPA2-PSK, WPA-Enterprise, AES |
| Management | UniFi Controller (free software) |
| Antennas | Internal dual-band |
| LED Indicators | Status: white/blue/orange |
| Max Clients (recommended) | 250+ per AP |
| Packing Contents | 5x UAP-AC-PRO, 5x Mount Kits, 5x PoE Injectors |
| Certifications | CE, FCC, IC |
| Cleaning Instructions | Wipe with dry cloth; avoid liquids |
| Spare Parts Availability | Contact Ubiquiti support for replacement |
Frequently Asked Questions - UAP-AC-PRO-5 Ubiquiti Networks
How do I set up the UAP-AC-PRO-5?
Connect the AP to your network via PoE injector, then adopt it using the UniFi Controller software (available for Windows/Mac/Linux) or mobile app.
Does it support mesh networking?
Yes, when managed by UniFi Controller, you can enable wireless uplink to create a mesh network with other UniFi APs.
What is the range of this access point?
Range depends on environment; typically up to 100m (outdoor) and 30m (indoor) per band. Use the UniFi design tool for planning.
Is the PoE injector included?
Yes, each UAP-AC-PRO-5 unit comes with a PoE injector and power cord. The injector is 802.3af/at compliant.
Can I use this AP without a UniFi Controller?
Yes, you can use the UniFi mobile app for standalone setup, but the full features require the Controller.
How many clients can connect?
The UAP-AC-PRO supports over 250 simultaneous clients, but performance may vary based on traffic and environment.
How to mount the access point?
Use the included ceiling mount bracket. Secure the bracket, then twist the AP into place. For wall mounting, use the same bracket.
What are the LED colors meaning?
White = default (adopted), blue = overridden, orange = isolated (no uplink), slow blink = locating AP, fast blink = updating.
Can I use a third-party PoE switch?
Yes, as long as the switch provides 802.3af/at PoE. The AP is compatible with both 24V passive and 48V standard PoE.
How to reset to factory defaults?
Press and hold the reset button next to the Ethernet port for 10 seconds until the LED turns off and on again.
User questions about UAP-AC-PRO-5 Ubiquiti Networks
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual UAP-AC-PRO-5 - Ubiquiti Networks and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UAP-AC-PRO-5 by Ubiquiti Networks.