SC - 1028 - Kettle Scarlett - Free user manual and instructions

Product Type	Electric Kettle
Brand	Scarlett
Model	SC-1028
Capacity	1.7 L (max), 0.5 L (min)
Power	1850-2200 W
Voltage	220-240 V
Frequency	50/60 Hz
Dimensions	Approx. 22 x 15 x 22 cm
Weight	Approx. 1 kg
Material	Plastic body, stainless steel heating element
Cord Storage	Cord wrap compartment in base
Boil-Dry Protection	Yes, automatic shut-off if empty
Auto Shut-Off	Yes, when water boils
Filter	Removable mesh filter in spout
Lid Release	Button on handle
Water Level Scale	External on side of kettle
On/Off Switch	Push-button on handle
Base Type	360° rotational base with cord storage
Usage	For heating water only, home use
Cleaning	Wipe exterior with damp cloth; descale regularly with descaling agent
Storage	Store in dry cool place after cooling

Frequently Asked Questions - SC - 1028 Scarlett

How do I clean the kettle?

Always unplug and let cool. Clean the outside with a soft damp cloth and dry. Do not use abrasive materials. For descaling, use a commercial descaling agent following its instructions.

Can I open the lid while water is boiling?

No, do not open the lid while water is boiling. Always close the lid properly before switching on to ensure auto shut-off works and to avoid hot water overflow.

What is the minimum water level?

The minimum water level is 0.5 L (marked as "MIN"). Do not operate below this level to prevent dry boiling.

Why does my kettle turn off before boiling?

This may happen if the lid is not closed properly, or if there is not enough water. Ensure the lid is securely closed and water level is between MIN and MAX. Also, if the kettle is dry, the safety system will shut it off.

How do I use the kettle for the first time?

Fill the kettle with cool water to the maximum level and boil. Empty and repeat once. The appliance is then ready for use.

Can I use the kettle for other liquids like milk or soup?

No, this kettle is designed for heating water only. Using it for other liquids may damage the appliance and pose safety risks.

What should I do if the kettle does not switch on?

Check that the plug is properly connected and the On/Off switch is pressed. Ensure the kettle is correctly placed on the base. If it still does not work, allow it to cool for 10 minutes if it was dry-boiled.

How do I store the kettle?

Switch off and unplug, let it cool completely. Wrap the cord around the base storage compartment. Store in a dry, cool place.

Can I immerse the kettle in water?

No, never immerse the kettle, base, cord or plug in water or other liquids. If this happens, unplug immediately and have it checked by an expert.

Is the kettle safe for children?

This appliance is not intended for use by children or persons with reduced capabilities without supervision. Children should be supervised to ensure they do not play with the appliance.

USER MANUAL SC - 1028 Scarlett

Line drawing of a white SCARLETT watermelon with labeled buttons (no text or symbols on the device itself)

www.scarlett.ru

АЯ46

002

010

GB DESCRIPTION

1. Base unit with cord storage compartment
2. Body
3. Spout
4. Filter
5. Lid
6. Lid release button
7. On/Off switch
8. Handle
9. Water level scale

CZ POPIS

• Please read these operating instructions carefully before connecting your kettle to the power supply, in order to avoid damage due to incorrect use.
• Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.
• Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
• For home use only. Do not use for industrial purposes.
  • Always unplug the appliance from the power supply when not in use.
• Keep the base unit away from water and protect from splashes.
• Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall socket immediately and have the unit checked by an expert before using it again.
• Do not operate the appliance if the cord or the plug is damaged or if the appliance has been otherwise damaged. In such cases take the appliance to a qualified specialist for check and repair if necessary.
• Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.
• To disconnect the appliance from the power supply pull it out by the plug only, not by the cord.
• Place the appliance on a dry stable surface, away from sources of heat (e.g. hotplates); do not place it under curtains and shelves.
• Do not leave the appliance unattended when in use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes.
• Never take the kettle from its base while in operation. Switch the appliance off first.
• ATTENTION: Do not open the lid while water is boiling.
• Close the lid properly before switching on. Otherwise, the appliance will not switch off automatically and the hot water may overflow.
• The kettle is for heating water only, not for any other purposes and liquids.
• If the product has been exposed to temperatures below 0^ C for some time it should be kept at room temperature for at least 2 hours before turning it on
• The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

BEFORE USING FOR THE FIRST TIME

- Fill the kettle with cool water up to the maximum level mark and boil it. Empty the kettle. Repeat this operation. The appliance is ready for use.

INSTRUCTION FOR USE

FILLING

• Remove the kettle from the base unit.
• You can fill the kettle with water via the spout or neck with opened lid.
• Do not fill the kettle with less than 0.5 l of water (less than “MIN” mark) to prevent it from operating dry and more than 1.7 l (up to “MAX” mark) to avoid overfilling and water spilling out during the boiling.

SWITCHING ON

• After filling with water, place the kettle on the base unit.
- Connect the plug to the power supply and push On/Off switch. The appliance will turn on and indicator will light. SWITCHING OFF
- When water begins to boil, the kettle will switch off automatically and indicator light will go off.
- NOTE: This appliance has a safety system, which automatically switches heating element off if the appliance inadvertently has been switched on when empty, or if it operates dry. In this case let the appliance cool down 10 minutes before filling with water again.

SWITCHING ON AGAIN

- If the kettle has been switched off automatically, it can be switched on again after cooling for 15-20 seconds.

CARE AND CLEANING

• Open the lid and pour out the water through the orifice.
  • Always remove the plug from the socket and let the appliance cool down completely.
• Clean the outside of the kettle and the base unit with a soft damp cloth, then wipe with a dry cloth. Do not use any abrasive materials.
• Remove scale regularly, using special descaling agents, available at the market, following given instructions.

STORAGE

• Switch off and unplug the appliance; let it entirely cool.
• Complete all requirements of Chapter CLEANING AND CARE.
• The cord can be wrapped around the base area for storage.
• Keep the appliance in a dry cool place.